FallTech 790130 drop-in anchor for steel 30-pack, sets into a drilled hole
FallTech

FallTech 790130 Drop-In Anchor for Steel, 30-Pack

(No reviews yet) Write a Review
$923.00
Brand:
FallTech
SKU:
790130
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Anchorage Connectors

FallTech 790130 Drop-In Anchor for Steel (30-Pack)

The FallTech 790130 is a 30-pack of drop-in anchors for structural steel. Each anchor sets into a drilled hole in the steel to create a fast, low-profile tie-off point, and the case pack keeps a crew supplied across a project.

Each anchor is certified to ANSI Z359.18-2017, rated for 5,000 lb (22.2 kN), for one worker up to 310 lb (ANSI) or 425 lb (OSHA).

FallTech 790130 drop-in anchor for steel 30-pack, sets into a drilled hole
30-PackContractor Case
5,000 lbsAnchorage Strength (22.2 kN)
Type AANSI Z359.18-2017
1 Worker310 lb ANSI / 425 lb OSHA
Drop-InDrilled Hole
SteelStructural Mount
Low ProfileFast Install
BulkJob-Lot Quantity

Who Needs This Product

This product is a 30-count bulk pack of drop-in steel anchors. Steel crews set each anchor into a drilled hole to create a tie-off point, then connect an SRL or lanyard. You still need a certified full-body harness and a compatible connecting device.

Features

Bulk 30-count pack

Keeps a crew supplied with tie-off anchors across the project.

Drop-in install

Sets into a drilled hole in structural steel for a quick anchor.

Low-profile

Compact anchor point that sits flush with the steel.

Job-lot quantity

One case covers a large layout of anchor points.

Consistent tie-offs

Standardize anchor points across a steel structure.

ANSI Z359.18-2017

Each anchor is certified and rated for 5,000 lb (22.2 kN).

⚠

Drill the correct hole in sound steel and set each anchor per the manual. Use the specified drill and hole size in steel rated to support the anchor, and confirm each anchor is fully set before use. Confirm fall clearance and swing-fall with the Fall Protection Calculator below.

Compliance Standards

ANSI Z359.18-2017

American National Standard for anchorage connectors. Rated 5,000 lb (22.2 kN).

OSHA 29 CFR 1926.502

Federal construction fall protection anchorage requirements.

OSHA 29 CFR 1910

General industry personal fall protection requirements.

Rated 5,000 lb (22.2 kN)

Anchorage strength for personal fall arrest.

Typical Applications

Steel erectionBulk drop-in anchors across a structure.
Industrial steelStandardized tie-offs on beams and decks.
ManufacturingAnchor layouts on steel.
BridgeAnchors across a large steel project.
FabricationStock a case for shop and field.
MaintenanceFixed anchor points for return work.

How to Install

Follow the FallTech instruction manual. The sequence below is an overview only.

  1. Inspect. Check the anchor body, connection point, and hardware for damage before each use.
  2. Prepare the structure. Confirm the mounting surface is sound and rated to support the anchor per the manual.
  3. Install and secure. Mount the anchor as specified and set all fasteners to the required torque.
  4. Connect. Attach your SRL or energy-absorbing lanyard to the connection point.
  5. Check clearance. Confirm fall clearance and swing-fall with the calculator below.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the anchor from service for any of the conditions below.

  • Anchor body and welds: cracks, bending, deformation, or corrosion.
  • D-ring or connection point: deformation, sharp edges, cracks, or corrosion.
  • Fasteners and hardware: damaged threads, loose or missing fasteners.
  • Labels: illegible or missing markings.

Remove the anchor from service immediately after any fall-arrest event, and destroy retired equipment so it cannot return to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeDrop-in anchor for steel, 30-pack
Quantity30 anchors per case
InstallDrilled hole in structural steel
Anchorage classificationANSI Z359.18-2017
Anchorage strength5,000 lb (22.2 kN)
Capacity (ANSI)One worker, 130 to 310 lb combined
Capacity (OSHA)One worker, up to 425 lb combined
StandardsANSI Z359.18-2017; OSHA 1926.502 and 1910
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

What is in the 790130 pack?
Thirty drop-in anchors for structural steel, the contractor case pack for a steel crew.
How does a drop-in anchor install?
Each anchor sets into a drilled hole in the steel per the manual, creating a low-profile tie-off point.
Why buy the 30-pack?
When a structure needs many anchor points, the 30-count case is the economical way to stock drop-in steel anchors.
What is the rated strength and capacity?
Each anchor is certified to ANSI Z359.18-2017 with 5,000 lb (22.2 kN) strength, for one worker up to 310 lb (ANSI) or 425 lb (OSHA).
What hole size do they need?
Drill the hole size specified in the FallTech instruction manual for the anchor to set correctly.
What do I connect to it?
Connect a compatible SRL or energy-absorbing lanyard to the connection point, used with a certified full-body harness.
Can it be reused after a fall?
No. Remove the anchor from service immediately after any fall-arrest event and destroy it so it cannot be reused.

FallTech 790130 Submittals and Documentation

790130 Instruction Manual (PDF)Installation, capacity, and inspection. 790130 Declaration of Conformity (PDF)Certification to ANSI Z359.18-2017 (FallTech test lab). 790130 Spec Sheet (PDF)One-page specifications summary.

Related Anchors

Specifying Anchors for Your Crew?

The anchor, the connecting device, and the harness all have to match the structure and the fall clearance below. Confirm your application with us and we will help you choose the right anchor.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech provides a 2-year limited warranty against defects in materials and workmanship on the FallTech product. The warranty is void if the product is altered, misused, or damaged by neglect, abuse, or accident, and it excludes normal wear. Fall Protection Distributors, LLC passes through the manufacturer warranty and is not liable beyond the product replacement it provides.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!