FallTech 8593B Basic Plus Roofers Kit with Hinged Anchor with Mating Buckle Legs
FallTech

FallTech Basic Plus Roofers Kit with Hinged Anchor

(No reviews yet) Write a Review
$209.00 - $212.50
Brand:
FallTech
SKU:
8593BC
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Roofer Kits

FallTech Basic Plus Roofers Kit with Hinged Anchor

Single D-ring full body harness for fall arrest. Harness features mating buckle legs and chest.

Includes 3' Soft Pack energy absorbing lanyard with integrated manual rope adjuster. 50' construction-grade vertical lifeline includes plated alloy steel snap hook, steel thimble, and back-spliced end.

FallTech 8593B Basic Plus Roofers Kit with Hinged Anchor
70031D Full Body Harness
7410Hinged Roof Anchor
814950 ft Lifeline
8353LT3 ft EAL Rope Grab
ManualRope Adjuster
310 lbANSI Capacity
50 ftVertical Lifeline
2Leg Buckle Options

Who Needs This Product

Residential and commercial roofers buy a complete roofer's kit because it puts the whole rooftop fall arrest system in one box: harness, hinged reusable roof anchor, 50 ft vertical lifeline, and the rope-grab lanyard that ties them together. The hinged anchor nails to the structure and works both sides of the ridge, and the trailing versions follow the worker without manual repositioning.

Features

Single D-ring full body harness

Single D-ring full body harness for fall arrest.

Harness features mating buckle legs

Harness features mating buckle legs and chest.

Includes 3' Soft Pack energy

Includes 3' Soft Pack energy absorbing lanyard with integrated manual rope adjuster.

50' construction-grade vertical lifeline includes

50' construction-grade vertical lifeline includes plated alloy steel snap hook, steel thimble, and back-spliced end.

Roofer's Kit contains: 7003 Harness

Roofer's Kit contains: 7003 Harness, 7410 Anchor, 8149 Lifeline, and 8353LT Lanyard.

(See component part # for

(See component part # for standards and regulations compliance).

⚠

The anchor goes into structure, not just sheathing. Nail the hinged anchor per the FallTech instructions into the framing at the ridge, keep slack out of the lifeline, and verify fall clearance for the pitch you are working. Retire the anchor after any fall arrest loading.

Compliance Standards

Please see each component Part # for individual ANSI

Applicable requirement for this equipment: Please see each component Part # for individual ANSI and OSHA compliance.

OSHA compliance

Applicable requirement for this equipment: Please see each component Part # for individual ANSI and OSHA compliance.

OSHA 1926.502

Construction fall protection criteria for personal fall arrest systems, including anchorage, free fall, and clearance requirements.

Typical Applications

Residential roofingShingle and underlayment work on pitched roofs.
Re-roofsTear-off and dry-in with a reusable nail-on anchor.
Solar installationPV crews working pitched composition roofs.
Roof inspectionsFast single-worker rig for estimators and adjusters.
Punch-out workSmall crews finishing multiple houses per day.

How to Use

Follow the FallTech instruction manual. The sequence below is an overview only.

  1. Set the anchor. Nail the 7410 hinged anchor at the ridge per the instructions, hinged over the peak where needed.
  2. Rig the lifeline. Connect the 50 ft vertical lifeline to the anchor and drop it down the work face.
  3. Don the harness. Adjust leg and chest buckles; the dorsal D-ring sits between the shoulder blades.
  4. Connect the rope adjuster. Attach the lanyard's rope adjuster to the lifeline; trailing models follow as you work, manual models reposition by hand.
  5. Work the face. Keep slack out of the system and re-verify the anchor when moving planes.

Inspection and Retirement

Inspect every component before each use, with a documented competent person inspection at least annually.

  • Anchor: bent straps, cracks, and fastener hole wear.
  • Lifeline: cuts, abrasion, glazing, and end termination condition.
  • Rope adjuster: engages and locks on the line; anti-panic function (where fitted) operates.
  • Harness and lanyard: webbing, stitching, hardware, and absorber pack.
  • Labels: legible on all components.

Retirement triggers: any fall arrest event, deployed absorber, damaged rope or webbing, or a failed inspection. Nail-on anchors are reusable per the manual but retire with structural damage.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeReusable Anchor and Manual Rope Adjuster
SKU8593BC
Performance SpecificationsPlease see each component part # for individual performance specifications
Material SpecificationsPlease see each component Part # for individual material specifications
Available Configurations8593B (Mating Buckle Legs), 8593C (Tongue Buckle Legs)
StandardsPlease see each component Part # for individual ANSI and OSHA compliance; OSHA 1926.502 and 1910.66
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

What is in the roofer's kit?
The complete rooftop system: full-body harness, 7410 hinged reusable roof anchor, 50 ft vertical lifeline, and an energy absorbing lanyard with an integrated rope adjuster. Every component is listed with its part number in the spec table.
How does the hinged anchor work?
The 7410 nails through the roof sheathing into structure at the ridge. The hinge lets it fold over the peak so one anchor serves both roof planes, and it removes and reuses per the manual.
What is the difference between manual and trailing rope adjusters?
A manual adjuster stays where you set it on the lifeline and repositions by hand. A trailing adjuster follows you down the roof automatically, keeping slack out of the system without touching it, which is what you want on production roofing.
What roof pitch does this cover?
Rope grab systems on a vertical lifeline are the standard for steep-slope work; verify your pitch and application against the component manuals. On low-slope roofs check warning line and monitor requirements under OSHA 1926.502.
How long will the anchor last?
The 7410 is reusable across jobs per the manual. Inspect it before each use for bent straps and worn fastener holes, and retire it after any fall arrest loading.
Who is Fall Protection Distributors?
Fall Protection Distributors, LLC is an authorized FallTech dealer. Every product ships new, boxed, and warrantied.
How quickly does this kit ship?
Usually ships in 1 business day from our warehouse. Delivery time is based on the delivery location.

FallTech 8593B Submittals and Documentation

8593BC 7410 Declaration of Conformity (PDF)Manufacturer conformity certification for compliance files and submittal packages. 8593BC 7410 Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 8593BC 8149 Declaration of Conformity (PDF)Manufacturer conformity certification for compliance files and submittal packages. 8593BC 8149 Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 8593BC 8353LT Declaration of Conformity (PDF)Manufacturer conformity certification for compliance files and submittal packages. 8593BC 8353LT Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 8593BC Spec Sheet (PDF)Full specifications, features, and compliance summary for submittal packages.

Complete Your Fall Protection Setup

Outfitting a Crew with Fall Protection Kits?

Kit selection depends on your trade, your anchors, and the clearance below. We will match the kit to the job before it ships. Confirm your application with us and we will make sure every component matches before it ships.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech provides a 2-year limited warranty against defects in materials and workmanship on the FallTech product. The warranty is void if the product is altered, misused, or damaged by neglect, abuse, or accident, and it excludes normal wear. Fall Protection Distributors, LLC passes through the manufacturer warranty to the original purchaser.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!