Malta Dynamics LE7050-G2 50-foot EdgeHog SRL – Class 2 Leading Edge Protection
The Malta Dynamics LE7050-G2 50-foot EdgeHog SRL delivers the maximum reach available in the leading-edge series. Featuring a massive 50-foot galvanized steel cable, this Class 2 Self-Retracting Lifeline (SRL) is specifically designed for large-scale industrial projects where workers must stay securely tied off while maintaining a wide radius of movement. If you require a more compact reach for restricted work areas, check out the Malta Dynamics LE7020-G2 20-foot SRL or the Malta Dynamics LE7030-G2 30-foot SRL.
Maximum Reach, Maximum Safety.
Watch this technical breakdown to see how the Malta Dynamics EdgeHog series manages the high forces of a leading-edge fall arrest over sharp steel or concrete edges.
Exceptional Safety with Quick-Action Braking
The Malta Dynamics LE7050-G2 features the same high-performance braking system as its shorter counterparts, ensuring rapid fall arrest with minimal impact on the worker. Despite its extended 50-foot length, the 360-degree swivel top connection ensures the lifeline rotates with the user, reducing cable kinking and "bird-caging." The self-locking snap hook and internal energy absorption system allow you to focus on the task at hand with the confidence of elite-tier fall protection.
Engineered for Large-Scale Leading Edge Projects
Specifically engineered for leading-edge work, the Malta Dynamics LE7050-G2 is built to survive falls over sharp edges where standard lifelines may fail. The 3/16″ galvanized steel cable provides extreme abrasion resistance, while the high-impact thermoplastic housing protects the internal components from harsh environment debris. Fully compliant with ANSI Z359.14-2021 Class 2 and OSHA regulations, this 50-foot SRL is the definitive solution for large rooftops and structural steel work.
Comprehensive Compliance and Safety Inspections
To ensure 100% reliability, the Malta Dynamics LE7050-G2 requires a documented pre-use inspection before every shift. Verify that the fall indicator on the snap hook has not been triggered; if the indicator eyelet shows red, remove the unit from service immediately. Perform a strike test by pulling the cable sharply to engage the centrifugal brakes. For documented safety logs, download the official Malta Dynamics SRL Inspection Form from the links provided below.
Malta Dynamics LE7050-G2 Technical Submittal Data & Compliance Docs:
- Malta Dynamics EdgeHog LE7050-G2 Leading Edge SRL Spec Sheet – Full dimensional data and edge-test ratings.
- Malta Dynamics LE7050-G2 Declaration of Conformity – OSHA/ANSI Class 2 certification.
- Malta Dynamics LE7050-G2 SRL Instruction Manual – Detailed guide on foot-level anchorage and sharp edge safety.
- Malta Dynamics SRL Fillable Equipment Inspection Form – Essential for maintaining documented safety logs.
Malta Dynamics LE7050-G2 EdgeHog FAQ
1. When is the 50-foot LE7050-G2 necessary?
This unit is necessary for large work areas where the anchor point is significantly removed from the task area. Its 50-foot reach allows workers to cover approximately 7,800 square feet from a single overhead anchor point while remaining safely protected.
2. Is this unit safe for anchorage at my feet?
Yes. The Malta Dynamics LE7050-G2 is an ANSI Class 2 Leading Edge device. It is specifically rated and tested for foot-level tie-offs in environments where sharp edges (steel or concrete) are present.
3. Why does this model use a galvanized steel cable?
Galvanized steel offers the best combination of tensile strength and abrasion resistance. In a leading-edge fall, the cable must pivot over a sharp edge; synthetic web lines can be severed in these conditions, but 3/16″ galvanized steel is designed to survive the impact.
4. Does this 50-foot unit feature an easy-carry handle?
Yes. Despite its longer cable length, the LE7050-G2 includes an integrated easy-carry handle for better portability during site setup and breakdown.
5. How do I know if the LE7050-G2 has been involved in a fall?
Inspect the self-locking snap hook. If the fall indicator eyelet shows red, the internal mechanisms have been activated to arrest a fall. The unit must be retired immediately and replaced.
6. What is the worker weight capacity for this long-reach model?
The Malta Dynamics LE7050-G2 is rated for a weight range of 130 to 310 lbs, including all tools, clothing, and safety equipment.
7. How do I avoid common mistakes with the Malta Dynamics LE7050-G2?
- 1. Swing Fall Hazards: Because of the 50-foot reach, swing fall risks are magnified. Always try to stay within 15 degrees of your anchor point to minimize the pendulum effect.
- 2. Snap-Back Damage: Never release the hook and allow the cable to snap back into the housing uncontrolled; always walk the line back manually to protect the internal spring.
- 3. Missing 100% Tie-Off Needs: If your task requires transitioning between structural anchors without being unattached, use the Malta Dynamics LE3263D Dual Rebar Hook SRL or the Malta Dynamics LE3311D Dual Snap Hook SRL.
