Arc Flash Lanyard, Single Leg, Web Loop to Rebar Hook
This arc flash lanyard is built for energized environments end to end: polyamide webbing certified to ASTM F887 at 40 cal per square centimeter, a prominent red centerline that identifies arc-rated gear at a glance, a webbing loop at the harness end that keeps metal off the chest, and a galvanized alloy steel rebar hook for structure anchors.
Certified to ANSI Z359.13 and compliant with OSHA 1926.502 and 1910.140, rated for a 400 lb OSHA worker.
Who Needs This Product
Titan II connecting devices outfit whole crews without premium-line pricing while keeping the certification identical. Pair with any Titan II or H100 harness for a matched value system, and step to the Manyard line for stretch features or the TurboLite+ for minimum clearance.
Features
40 cal ASTM F887 Rating
The polyamide webbing carries a 40 cal per square centimeter arc rating, covering most utility and industrial boundaries.
Web Loop Connection
The harness end is a webbing loop, minimizing conductive hardware on the worker.
Energy Absorber
The absorber deploys under load, limiting arrest forces per ANSI Z359.13 with a visible indicator once used.
Locking Snap Hooks
Double-action locking hooks cannot open accidentally against a D-ring or anchor.
Titan II Value
The Titan line carries full certification with a simplified feature set, at crew-outfitting prices.
Hi-Viz Webbing
Bright webbing keeps the connecting device visible in gear checks and on the worker.
Technical Specifications
| SKU | FPLARCM-SUS |
|---|---|
| Product | Arc Flash Energy Absorbing Lanyard, Single Leg |
| Working length | 6 ft |
| Webbing | Polyamide, ASTM F887 certified 40 cal/cm2, red centerline |
| Connectors | Webbing loop (harness); galvanized alloy steel rebar hook (anchor) |
| Capacity | 400 lb per OSHA; 310 lb per ANSI marking |
| Standards | ASTM F887; ANSI Z359.13-2013 (R2022); OSHA 1926.502; 1910.140; 1910.66 |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
Mind the clearance. A 6 ft energy absorbing lanyard needs roughly 17 to 18 ft of clearance below the anchor after free fall, deceleration, harness stretch, and safety margin. Run your numbers with our fall protection calculator before the first connection.
Compliance Standards
ASTM F887
Certified for arc flash exposure with a 40 cal per square centimeter rating on the polyamide webbing.
ANSI Z359.13-2013 (R2022)
Certified as an energy absorbing lanyard under the recognized 2013 edition.
OSHA 1926.502, 1910.140, 1910.66
Meets OSHA connecting device requirements across construction and general industry.
Dual Capacity
Rated 400 lb per OSHA and 310 lb per the ANSI marking; follow the standard your program is written against.
Typical Applications
Setup Overview
- Inspect the lanyard, absorber, and both hooks before use.
- Connect the absorber end snap hook to the harness dorsal D-ring and verify the gate locks.
- Connect the anchor end to an anchorage or anchorage connector rated for fall arrest.
- Verify the anchor is at or above the dorsal D-ring wherever possible to limit free fall.
- Confirm total fall clearance below the work level before starting work.
Full use instructions ship with the lanyard.
Inspection and Retirement
Inspect the lanyard before each use, and have a competent person inspect it at least annually per ANSI Z359.2.
- Webbing and jacket: cuts, frays, burns, chemical damage, UV fading, or broken stitching.
- Energy absorber: no deployment, tearing, elongation, or exposed core; warning flag not showing.
- Hooks: gates close and lock; no cracks, corrosion, or distortion.
- Labels: present and legible, including capacity and standards.
Retirement triggers: any fall arrest event, any deployed absorber or warning flag, or any failed inspection.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller FPLARCM-SUS Lanyard Submittals and Documentation
FPLARCM-SUS Specification Sheet (PDF)Technical data, materials, and SKU-level UPC information. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. FPLARCM-SUS Lanyard Inspection Form (PDF)Printable pass/fail checklist for documented lanyard inspections.Compatible and Related Products
- Miller T4500 Titan II Non-Stretch Harness. The harness at the other end of the lanyard.
- Miller 216M Manyard II Stretch Lanyard. The stretchable premium alternative.
- Miller TurboLite+ PFL, Carabiner and Snap Hook. The PFL alternative that arrests in inches.
Outfitting Crews with Value Lanyards?
Hook style, length, and clearance decide the right lanyard. Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
