SSRA Ultimate Pro Pack: Standing Seam Safety Gear for Roofing Contractors and Solar Installers
The Ultimate Pro Pack is a versatile kit including eight Standing Seam Roof Anchor SSRA1 seam anchors, four SSRA2 Adjustable Roof Jack Adapters, two SSRA3 Anchor Plates, and a 100' Malta HL3001 Horizontal Lifeline system. The Ultimate Pro Pack provides your crew with maximum mobility and safety on standing-seam roofs without penetrating the panels.
Non-Penetrating Anchors: The SSRA1 Seam Anchors
The SSRA1 anchors offer a revolutionary non-penetrating design that ensures the integrity of standing-seam roofs. Made from solid 6061-T6 aluminum, each anchor features 12 stainless steel cupped tip set screws and 12 nylon-tipped stainless steel set screws. Engineered to revolutionize fall-protection anchorage attachment, the SSRA1 features a patented design that maintains roof integrity while providing superior safety. It arrives ready to install as a single-seam, single-user anchor point.
Standing Seam Roof Anchor Testing and Weight
The SSRA1 anchors withstand up to 14,500 lbs. of load, far exceeding the OSHA requirements of 5,000 lbs. This incredible strength is due to the anchor body's patented structural design, which ensures unmatched durability. Weighing only 4.5 lbs., the SSRA1 is the world's lightest OSHA 5,000 lb.-certified anchor. It can be installed in minutes with basic hand tools, making it suitable for temporary and permanent installations. This ease of use reduces downtime and increases efficiency, allowing contractors and installers to focus on their work without unnecessary delays.
Versatile Compatibility: Fits Over 500 Standing Seam Panel Profiles
The SSRA1's patented universal-fit design works with over 500 standing-seam panel profiles, including T-seams, bulb seams, SnapLok, single lok, double lok, and MR-24. This versatility ensures that no other anchor fits as many profiles as the SSRA1, making it an indispensable tool for roofing contractors or solar installers. It is compatible with devices from various fall protection manufacturers, enhancing its utility across applications.
▶ SSRA1 Compatibility Overview
This Panel Compatibility Chart is provided only as a reference. It is the Qualified Person's responsibility to verify structural suitability. The SSRA1 fits over 95% of standing seam panels. It is approved only for 22- and 24-gauge steel and is not compatible with aluminum, zinc, copper, or other soft metals. Do not install on curved, tapered, or batten-seam profiles.
▶ Nailstrip Panel Warning
Nailstrip-style panels are approximately 50% compatible. Some seams are too wide at the base, which can allow anchor movement during installation. Treat compatibility lists as guidelines, not guarantees.
▶ Installer Responsibility
It is solely the installer's or specifier's responsibility to confirm SSRA1 suitability for the specific panel and application. The employer and the designated Competent Person are solely responsible for evaluating the structural suitability of the supporting structure.
▶ Test Fit Recommendation
Perform a test fit with an RCT seam clamp or SSRA1 anchor well before installation to confirm proper engagement.
▶ Set-Screw Options
- Cupped-tip: 22-gauge steel—torque to 90 in-lbs
- Nylon-tip: 22/24-gauge steel—torque to 180-200 in-lbs
▶ Surface Impact
Minor seam dimpling and paint abrasion may occur. Scratches can be touched up with a matching paint pen.
Watch our technical unboxing of the Ultimate Pro Pack to see how the anchors, walkboard adapters, and horizontal lifeline system integrate for a total safety solution.
Enhanced Stability with SSRA2 Adjustable Roof Jack Adapters and SSRA3 Anchor Plates
The SSRA2 Adjustable Roof Jack Adapters provide a secure platform for 2"x10" walk boards on standing seam roofs. Adjustable height stabilizer legs ensure steady mounting on various seam profiles, enhancing stability and safety. These adapters are compatible with over 500 standing-seam roof panels and can be adjusted to fit roofs up to a 12/12 pitch. The SSRA3 Anchor Plates secure temporary horizontal lifelines, enhancing the system's versatility.
The Ultimate Pro Pack includes:
- (8) SSRA1 Seam Anchors—featuring a solid aluminum body with a universal fit design, 5,000 lbs. certified D-Ring, 12 stainless steel cupped tip set screws, 12 nylon tip set screws, owner's manuals, and 3/16 hex bits.
- (4) SSRA2 Roof Jack Adapters with instructions.
- (2) SSRA3 Anchor Plates with hardware.
- (1) Torque Wrench with a 1/4" drive x 3/16" hex bit.
- (1) 100' Malta HL3001 Horizontal Lifeline System, including Kernmantle Rope, alloy steel line tensioner, carabiners, O-rings, pass-through anchors, and storage bag.
For more information on panel compatibility and detailed test reports, visit our SSRA1 Panel Compatibility and Test Report pages.
Cut Sheet | Spec Sheet | SSRA1 Owners Manual | SSRA2 Roof Jack Adapter Instructions | SSRA3 Anchor Plate Instructions
Malta Dynamics HLL3001 100' HLL Operation Manual
Malta Dynamics HLL3001 Spec Sheet
Malta Dynamics HLL3001 Declaration of Conformity
SSRA1 Ultimate Pro Pack Frequently Asked Questions
What is the primary benefit of the Ultimate Pro Pack over individual kits?
The SSRA1 Ultimate Pro Pack is the total ridge-to-eave solution. It bundles 8 SSRA1 anchors, SSRA2 Roof Jack walkboard adapters, SSRA3 Anchor Plates, and a 100' temporary horizontal lifeline system. This provides a professional crew with complete mobility across a large roof surface without ever needing to detach from a certified safety system.
Does the unboxing video above show all the lifeline hardware?
Yes. As shown in our unboxing video above, the pack arrives with the Malta Dynamics HL3001 Kernmantle rope system, including the line tensioner, carabiners, and the SSRA3 Anchor Plates required to bridge the anchors for a certified horizontal setup.
How many workers can the Malta Dynamics 100' lifeline support?
When used with the SSRA1 anchors and SSRA3 Anchor Plates provided in this pack, the horizontal lifeline system is certified for two workers (310 lbs each) as a fall-restraint or fall-arrest system, according to the Malta Dynamics operation manual.
Can I set up walkboards and the lifeline at the same time?
Yes. This kit is designed for simultaneous staging and safety. You can use 4 anchors to mount 20 feet of walkboards with the SSRA2 Roof Jack adapters, while the remaining 4 SSRA1 anchors and 2 SSRA3 Anchor Plates support the horizontal lifeline above the work area.
What is the weight of the entire SSRA1 Ultimate Pro Pack?
The entire system, including the 8 SSRA1 anchors, 4 SSRA2 Roof Jack adapters, 2 SSRA3 Anchor Plates, torque wrench, and 100' lifeline with tensioners, weighs approximately 135 lbs. It arrives organized in heavy-duty packaging for easy transport to the jobsite.
Is this kit compatible with SnapLok or MR-24 industrial profiles?
Absolutely. Because the system is built on the SSRA1 universal-fit body, it is compatible with over 500 profiles, including SnapLok, bulb seams, and trapezoidal MR-24 seams, without needing to penetrate the panels or void roof warranties.
How do I avoid common setup problems with the Ultimate Pro Pack?
To ensure a professional and code-compliant installation, follow these three technical protocols:
- 1. Bridge Plates Correctly: Each SSRA3 Anchor Plate must bridge TWO SSRA1 base anchors. Never attach a lifeline terminal to a single anchor point.
- 2. Precision Torque Only: Use the included micro-torque wrench to tighten all 96 set screws. Never use impact drivers, which will strip threads and compromise the 5,000-lb rating.
- 3. Steel Substrate Only: Confirm you are on 22 or 24-gauge steel. Do not install on soft metals like copper or aluminum, as they cannot support the dynamic loads of a 4-man lifeline system.
