FallTech 3pc Vehicle Hitch-Mount Base for Offset Davit Arms
Installs to Class 3 minimum vehicle trailer hitch with 2" square receiver. Steel hitch bar features PVC mast sleeve insert and mast securing handscrew.
Horizontal foot bar incudes two pivoting feet and vertical T-bar bracket for improved stability. Two detent pins quickly connect foot bar, vertical post and hitch bar.
Who Needs This Product
Mobile crews that service many sites use vehicle hitch-mount davit components to turn a standard truck receiver into a confined space anchor. The vehicle provides the ballast and the hitch provides the mounting point, which eliminates hauling a separate base and speeds up multi-site routes.
Features
Installs to Class 3 minimum
Installs to Class 3 minimum vehicle trailer hitch with 2" square receiver.
Steel hitch bar features PVC
Steel hitch bar features PVC mast sleeve insert and mast securing handscrew.
Horizontal foot bar incudes two
Horizontal foot bar incudes two pivoting feet and vertical T-bar bracket for improved stability.
Two detent pins quickly connect
Two detent pins quickly connect foot bar, vertical post and hitch bar.
11" to 36" height adjustment
11" to 36" height adjustment range provided in 3" increments.
Constructed
Constructed with lightweight powder coated aluminum and plated alloy steel components.
The vehicle is the ballast. Use a Class 3 minimum hitch, keep the vehicle parked with the brake set and wheels chocked, and control the keys while the system is occupied.
Compliance Standards
OSHA 1926.502
Applicable requirement for this equipment: OSHA 1926.502 and 1910.66 when used in a complete system.
1910.66 when used in a complete system
Applicable requirement for this equipment: OSHA 1926.502 and 1910.66 when used in a complete system.
OSHA 1910.146
Permit-required confined space regulation that drives retrieval and rescue equipment requirements for entry work.
Typical Applications
How to Use
Follow the FallTech instruction manual. The sequence below is an overview only.
- Position the vehicle. Back in so the davit reach places the anchor over the portal, set the parking brake, and chock the wheels.
- Mount the component. Insert it into the Class 3 minimum 2 in square receiver and pin it.
- Assemble and verify. Build the mast and arm, mount your device, and confirm stability before use.
- Keep the vehicle parked. The vehicle stays stationary with keys controlled while the system is occupied.
Inspection and Retirement
Inspect the components before each use. A competent person must inspect them at least annually.
- Receiver tube: cracks, deformation, and corrosion.
- Pins: correct size, full engagement, and no wear grooves.
- Welds: no cracking or rust jacking.
- Vehicle hitch: rated Class 3 or higher and in good condition.
Retirement triggers: any fall load on the system, weld cracks, or receiver deformation.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | 3pc Vehicle Hitch-mount Base |
|---|---|
| SKU | 65015X |
| Rescue Static Strength | 5,000 lb min. |
| Entry/Egress Static Strength | 1,800 lb min. |
| Rescue User Capacity | 2 users, 310 lb max. for each person |
| Entry/Egress Capacity | 1 user, 310 lb max. |
| Vehicle Hitch-mount Base | Powder coated 6061 aluminum and plated steel |
| Sleeve Insert | PVC pipe |
| Available Configurations | 6501528 (For 12 in to 29 in Arm), 6501644 (For 24 in to 44 in Arm) |
| Standards | OSHA 1926.502 and 1910.66 when used in a complete system |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 6501528 Submittals and Documentation
65015X Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 65015X Declaration of Conformity (6501528) (PDF)Manufacturer conformity certification for compliance files and submittal packages. 65015X Brochure (PDF)Specifications, dimensions, and feature summary. 65015X Declaration of Conformity (6501644) (PDF)Manufacturer conformity certification for compliance files and submittal packages. 65015X Brochure (PDF)Specifications, dimensions, and feature summary.Complete Your Confined Space System
- FallTech Offset Davit Arm with Device Receiver Bracket. The adjustable-reach davit arm.
- FallTech Vehicle Hitch Mount Universal Joint Adapter. Levels the davit on sloped parking.
- FallTech Replacement Sleeve for Vehicle Hitch-Mount Bases. Replacement sleeve for hitch bases.
Specifying Confined Space Equipment for Your Crew?
The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.
Call 863-703-4522 to talk to a fall protection specialist.
