FallTech single-D permanent roof anchor for wood with stainless nails
FallTech

FallTech Single-D Permanent Roof Anchor for Wood

(No reviews yet) Write a Review
$112.50 - $120.00
Brand:
FallTech
SKU:
7434
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Anchorage Connectors

FallTech Single-D Permanent Roof Anchor for Wood

The FallTech Single-D Permanent Roof Anchor installs permanently on a wood roof to provide an always-ready tie-off point with a single D-ring. It is designed to stay with the building for ongoing roof access and maintenance. Choose the 8 in or 17 in length for your framing.

It meets OSHA fall protection requirements, rated to a 5,000 lb anchorage requirement, for one worker up to 310 lb, and fastens with corrosion-resistant stainless nails.

FallTech single-D permanent roof anchor for wood with stainless nails
PermanentSingle-D Roof Anchor
OSHACompliant
1 WorkerUp to 310 lb
Single D-RingAlways Ready
8 in or 17 inLength Options
Wood RoofStainless Nails
Maintenance AccessReusable Tie-Off
5,000 lbsAnchorage Requirement

Who Needs This Product

This product is a permanent single-D roof anchor, the anchorage component of a personal fall arrest system for wood roofs. Builders install it to give owners and service crews a permanent tie-off point, then a worker connects an SRL or lanyard for ongoing roof access. You still need a certified full-body harness and a compatible connecting device.

Features

Permanent installation

Stays with the building for ongoing roof access and maintenance.

Single D-ring

An always-ready connection point for an SRL or lanyard.

Two lengths

Choose 8 in or 17 in to suit the framing and roof.

Stainless nails

Corrosion-resistant fasteners for a lasting install.

Wood roof mount

Fastens to sound rafters or trusses per the manual.

OSHA compliant

Meets the OSHA anchorage requirement for one worker up to 310 lb.

⚠

Fasten to sound framing with the supplied stainless nails. Drive all required fasteners into solid rafters or trusses per the manual and flash or seal the anchor for a weather-tight permanent install. Confirm fall clearance and swing-fall with the Fall Protection Calculator below.

Compliance Standards

OSHA compliant

Meets OSHA fall protection anchorage requirements. Not ANSI-certified.

OSHA 29 CFR 1926.502

Federal construction fall protection anchorage requirements.

OSHA 29 CFR 1910

General industry personal fall protection requirements.

Rated 5,000 lb (22.2 kN)

Meets the OSHA anchorage strength requirement.

Typical Applications

Permanent roof accessAlways-ready tie-off for maintenance.
Residential roofsOwner and service anchor points.
HVAC serviceRoof access for equipment work.
Solar maintenancePermanent anchor for panel service.
Re-roofingSet permanent anchors during the build.
InspectionFixed roof access anchor.

How to Install

Follow the FallTech instruction manual. The sequence below is an overview only.

  1. Inspect. Check the anchor body, connection point, and hardware for damage before each use.
  2. Prepare the structure. Confirm the mounting surface is sound and rated to support the anchor per the manual.
  3. Install and secure. Mount the anchor as specified and set all fasteners to the required torque.
  4. Connect. Attach your SRL or energy-absorbing lanyard to the connection point.
  5. Check clearance. Confirm fall clearance and swing-fall with the calculator below.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the anchor from service for any of the conditions below.

  • Anchor body and welds: cracks, bending, deformation, or corrosion.
  • D-ring or connection point: deformation, sharp edges, cracks, or corrosion.
  • Fasteners and hardware: damaged threads, loose or missing fasteners.
  • Labels: illegible or missing markings.

Remove the anchor from service immediately after any fall-arrest event, and destroy retired equipment so it cannot return to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeSingle-D permanent roof anchor for wood
Length options8 in (7434S), 17 in (7434)
FastenersStainless nails
ComplianceOSHA
Anchorage strengthMeets OSHA requirement (5,000 lb (22.2 kN))
Capacity (ANSI)One worker, 130 to 310 lb combined
Capacity (OSHA)One worker, up to 425 lb combined
StandardsOSHA 1926.502 and 1910
PackagingSold in multi-packs. Pack quantity is set per option so each pack is an economical order; choose your option above.
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

What lengths are available?
The Single-D anchor comes in an 8 in (7434S) and a 17 in (7434) length; choose based on your framing.
Is it permanent?
Yes. It is designed to stay with the building for ongoing roof access, unlike a removable temporary anchor.
What fasteners does it use?
Corrosion-resistant stainless nails driven into sound wood framing per the manual.
Is it ANSI certified?
It meets OSHA fall protection requirements for one worker up to 310 lb. Confirm it fits your fall protection plan.
How is it different from the Twin-D anchor?
The Single-D has one D-ring; the FallTech 7431 Twin-D has two D-rings for two connection points or a lifeline pass-through.
What do I connect to it?
Connect a compatible SRL or energy-absorbing lanyard to the connection point, used with a certified full-body harness.
Can it be reused after a fall?
No. Remove the anchor from service immediately after any fall-arrest event and destroy it so it cannot be reused.

FallTech 7434 Submittals and Documentation

7434S Instruction Manual (PDF)Installation, capacity, and inspection. 7434S Declaration of Conformity (PDF)Certification to OSHA requirements (FallTech test lab). 7434S Spec Sheet (PDF)One-page specifications summary.

Related Anchors

Specifying Anchors for Your Crew?

The anchor, the connecting device, and the harness all have to match the structure and the fall clearance below. Confirm your application with us and we will help you choose the right anchor.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech provides a 2-year limited warranty against defects in materials and workmanship on the FallTech product. The warranty is void if the product is altered, misused, or damaged by neglect, abuse, or accident, and it excludes normal wear. Fall Protection Distributors, LLC passes through the manufacturer warranty and is not liable beyond the product replacement it provides.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!