FallTech Weather-Resistant Tripod Storage Bag

(No reviews yet) Write a Review
$139.00 - $149.00
Brand:
FallTech
SKU:
NL728X
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
FallTech Confined Space Gear

FallTech Weather-Resistant Tripod Storage Bag

Reinforced nylon storage bag purpose-sized for FallTech confined space tripods. The 70 in size (NL7281) fits the 8 ft tripod (7276 series), and the 80 in size (NL7280) fits the 11 ft tripod (7275).

Carry handles and a full-length zipper closure make loading a collapsed tripod fast, and the weather-resistant shell keeps grit and moisture off the legs, pins, and head sheave between entries.

FallTech weather-resistant tripod storage bag with carry handles and full-length zipper
2 Sizes70 in or 80 in
NylonReinforced Shell
Full-LengthZipper Closure
CarryHandles Included
WeatherResistant Build
7276 Fit70 in Size
7275 Fit80 in Size
FallTechFactory Bag

Protect the Tripod Between Entries

A confined space tripod rides in truck beds and drags across concrete more than almost any other piece of rescue gear. A fitted storage bag keeps the telescoping legs, detent pins, and head sheave clean, protected, and organized so the tripod deploys smoothly when the next permit-required entry opens.

These are the same factory bags FallTech includes in its B-series tripod kits, offered separately for crews that already own a tripod.

Key Features

Reinforced Nylon

Weather-resistant reinforced nylon construction stands up to job site handling.

Full-Length Zipper

The bag opens along its full length, so the collapsed tripod drops in instead of threading in.

Carry Handles

Balanced handles make a one-person carry from the truck to the portal manageable.

Two Fitted Sizes

70 in for the 8 ft tripod (7276 series) and 80 in for the 11 ft tripod (7275).

Keeps Grit Out

A covered tripod keeps dirt out of leg locks and pins, cutting field maintenance.

Kit-Matched

The same bags packed with FallTech B-series tripod kits, available as a replacement or add-on.

A storage bag is not fall protection equipment. It carries no load rating and must never be used as an anchorage, lifting sling, or hoisting attachment. Use it to store and transport the tripod only.

Compliance Standards

No Load Rating

Storage bags are accessories and carry no ANSI or OSHA equipment rating.

Supports Equipment Care

Clean, dry storage supports the manufacturer inspection and maintenance requirements in the tripod manual.

OSHA 1910.146 Programs

Organized, protected rescue gear supports the readiness a permit program depends on.

FallTech Factory Accessory

Made by FallTech to fit FallTech confined space tripods.

Typical Applications

Fleet trucksKeeping rescue tripods protected in service bodies and truck beds.
Plant rescue cartsStaging a tripod at fixed entry points without dust buildup.
Rental and shared gearKeeping pooled equipment complete and clean between crews.
Kit replacementReplacing a worn or lost bag from a FallTech B-series tripod kit.

How to Use

No tools or training are required. The overview below covers basic use.

  1. Collapse the tripod. Retract the telescoping legs, secure the leg pins, and stow the safety chain.
  2. Load the bag. Open the full-length zipper, lay the tripod in, and close the zipper completely.
  3. Store it dry. Carry by the handles and store the bag out of direct sun and standing water.

Inspection and Retirement

Check the bag when you inspect the tripod it protects.

  • Shell: tears, abrasion, and UV fading.
  • Zipper: full travel without separation.
  • Handles: stitching intact at all anchor points.
  • Interior: dry, free of grit and chemical residue.

Replace the bag when tears or failed stitching let debris reach the tripod. A damaged bag does not affect the tripod rating but stops doing its job.

Fall Protection Distributors logo Fall Protection
Distributors, LLC
Free Tool · No Signup · OSHA 1926.502
Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeWeather-resistant tripod storage bag
SKUNL7281 (70 in), NL7280 (80 in)
MaterialReinforced nylon
ClosureFull-length zipper
HandlesCarry handles
FitsNL7281: FallTech 8 ft tripod (7276 series). NL7280: FallTech 11 ft tripod (7275)
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

Which size fits my FallTech tripod?
The 70 in bag (NL7281) fits the FallTech 8 ft tripod, part 7276 series, and the 80 in bag (NL7280) fits the FallTech 11 ft tripod, part 7275. Measure your collapsed tripod if you are unsure and pick the size with room to spare.
Is this the same bag that comes in the FallTech B-series tripod kits?
Yes. FallTech packs these bags with its B-series confined space tripod kits, such as the 7500B and 7508B, and offers them separately for crews that already own a tripod.
Can I lift or lower the tripod with the bag?
No. The bag carries no load rating and must never be used as a lifting sling, hoisting attachment, or anchorage. It is a storage and transport accessory only.
What is the bag made of?
FallTech lists reinforced nylon construction with carry handles and a full-length zipper closure. The shell is weather resistant to keep grit and moisture off the equipment.
Will a third-party tripod fit?
The bags are sized for FallTech tripods. A third-party tripod may fit if its collapsed length is shorter than the 70 in or 80 in bag length, but FallTech sizes these specifically for the 7276 series and 7275.
Does a storage bag really matter for compliance?
The bag itself carries no rating, but the tripod manual requires equipment to be stored clean and dry, and protected storage helps gear pass the inspection your permit program requires before each entry.
Is there a matching bag for the SRL-R or winch?
Yes. FallTech offers the 20 in NL7282 device storage bag that fits FallTech confined space devices, including 3-way SRL-Rs and personnel winches.

Outfitting a Confined Space Crew?

The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech 2-Year Limited Warranty. FallTech warrants to the buyer that all products are free from defects in material and workmanship at the time of shipment. Obligation is limited to product replacement for two (2) years from the date of installation or use by the owner, not to exceed two (2) years from the date of shipment. This warranty is not transferable and is void if the product is changed, altered, or used in a manner other than intended. It covers defects in material and workmanship only; it does not cover normal wear and tear, neglect, abuse, or accident. The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the FallTech product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products