FallTech Tripod Leg Bracket Assembly
Leg-mounted design for round legs on #7275 Tripod. Includes two 5" detent pins for securing device and leg installation.
Plated carbon steel construction with Grade 5 bolts and nuts.
Who Needs This Product
Safety managers and crew leads keep factory replacement parts and accessories on hand so a worn pin, sheave, or bracket never takes a confined space system out of service. Using genuine FallTech parts keeps the system within its certification and warranty.
Features
Leg-mounted design for round legs
Leg-mounted design for round legs on #7275 Tripod.
Includes two 5" detent pins
Includes two 5" detent pins for securing device and leg installation.
Plated carbon steel construction
Plated carbon steel construction with Grade 5 bolts and nuts.
Genuine parts keep the certification. Substituting non-factory hardware voids the system certification and the FallTech warranty. Match the part number to your system model before ordering.
Compliance Standards
OSHA 1910.146
Permit-required confined space regulation that drives retrieval and rescue equipment requirements for entry work.
Typical Applications
How to Use
Follow the FallTech instruction manual. The sequence below is an overview only.
- Match the part. Confirm the part number fits your system model before ordering.
- Install per the manual. Follow the FallTech manual for your system.
- Log the change. Record the replacement in your equipment inspection log.
Inspection and Retirement
Inspect replacement parts on the same schedule as the parent system.
- Wear: check contact surfaces and moving parts before each use.
- Deformation: no bending, cracking, or elongation.
- Corrosion: no rust or pitting that affects function.
Replace any part that fails inspection, and re-verify the parent system before returning it to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Tripod Leg Bracket |
|---|---|
| SKU | 7291 |
| Bracket | Plated carbon steel |
| Detent Pins | Plated Carbon Steel; 5" |
| Available Configurations | 7291A (For 7275 Round Leg), 7291B (For 7276 Square Leg) |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 7291A Submittals and Documentation
7291 Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 7291 Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 7291 Spec Sheet (PDF)Full specifications, features, and compliance summary for submittal packages.Complete Your Confined Space System
- FallTech Confined Space Tripod, 6 to 11 ft Adjustable. The 6 to 11 ft adjustable tripod.
- FallTech Confined Space Tripod, 5 to 8 ft Adjustable. The compact 5 to 8 ft tripod.
- FallTech Confined Space Personnel Winch. Hand-crank personnel lifting with an automatic brake.
- FallTech DuraTech 3-Way SRL-R for Tripods. The standard tripod-mounted rescue SRL.
Specifying Confined Space Equipment for Your Crew?
The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.
Call 863-703-4522 to talk to a fall protection specialist.
