BP10L ToolGrip 10 lbs Tool Pouch, Large, 3-Pack
The Frontline BP10L is the large workhorse of the ToolGrip pouch line: high-quality polyester with webbing loops and metal snaps that attach to a working belt in seconds, holding tools securely while keeping them accessible at all times.
A durable rope reinforcement around the top edge maintains the pouch's shape for one-handed tool returns, the ventilated design reduces moisture to keep tools in top condition, and the 10 lb safe storage capacity fills 8.75 in x 3.75 in x 7.5 in of organized space - protecting workers below from falling tools and objects.
Who Needs This Product
This product is dropped-object prevention equipment from the Frontline ToolGrip line. Crews working at height tether their tools so a slip never becomes a struck-by incident below. ToolGrip products are rated for tools only - personal fall protection is a separate system.
Features
Snap-on belt mount
Webbing loops with metal snaps go on and off the belt without unthreading.
Holds its shape
Rope-reinforced top edge stays open for one-handed tool returns.
Ventilated
Airflow reduces moisture so tools stay rust-free.
10 lb capacity
A full hand-tool loadout, contained.
Drop protection
Contained tools cannot become struck-by incidents below.
Large format
The big brother to the TP10 pouch.
Technical Specifications
| SKU | BP10L |
|---|---|
| Type | Large tool pouch |
| Materials | High-quality polyester; metal hardware |
| Safe storage capacity | 10 lbs |
| Dimensions | 8-3/4 in L x 3-3/4 in W x 7-1/2 in H |
| Attachment | Webbing loops with metal snaps |
| Top edge | Rope reinforcement |
| Design | Ventilated |
Tool tethering equipment only - NEVER personal fall protection. ToolGrip products are rated for tools, in the capacities on the spec sheet. Never connect any ToolGrip component to a personal fall arrest or restraint system, and never exceed the rated tool weight.
Compliance Standards
ANSI/ISEA 121-2018
American National Standard for dropped object prevention solutions - the consensus standard for tool tethering equipment.
OSHA 1926.759
Falling object protection requirements in steel erection; tethering supports compliance.
OSHA General Duty Clause
Dropped-tool struck-by incidents are routinely cited under 5(a)(1); tethering is the recognized control.
Typical Applications
How to Set Up the BP10L
Follow the manufacturer's manual. The sequence below is an overview only.
- Inspect. Check fabric, stitching, snaps, and the rope edge before each use.
- Mount. Snap the webbing loops over the work belt where you want the pouch to ride.
- Load. Stow tools within the 10 lb safe storage capacity.
- Tether what matters. Pair pouch storage with ToolGrip tethers for tools in active use.
- Check the snaps. Confirm both snaps are seated before working at height.
Inspection and Retirement
Inspect before each use. Pull the equipment from service for any of the conditions below.
- Webbing and elastic: cuts, fraying, abrasion, burns, or loss of elasticity.
- Stitching: broken, pulled, or abraded threads.
- Hardware: deformation, cracks, corrosion, or gates and locks that fail to close.
- Attachment points: loose tape bonds, worn loops, or damaged D-rings.
- Markings: labels must be present and legible.
Remove from service immediately if any inspection point fails or after the tether arrests a dropped tool with visible damage. ToolGrip products are tool tethering equipment - never use them for personal fall protection.
Frequently Asked Questions
Frontline BP10L Submittals and Documentation
Frontline BP10L Spec Sheet (PDF)Materials, capacity, dimensions, and features. Frontline ToolGrip User Manual (PDF)Use, limitations, inspection, and retirement for the ToolGrip tool tethering line. Frontline ToolGrip Quick Display Guide (PDF)Line overview of the ToolGrip tool tethering family. Frontline Catalog (PDF)The full Frontline Fall Protection product catalog.Compatible and Related Products
- Frontline TP10 Tool Pouch with D-Rings. The zippered pouch with tethering D-rings.
- Frontline TLS15 Elastic Tool Tether. Tether the tools you pull from the pouch.
- Frontline HH05SW Swiveling Hammer Holster. Dedicated hammer carry beside the pouch.
Building a Dropped-Object Program?
Tethers, anchors, holsters, and pouches work as a system. Confirm your tool list and working heights with us and we will walk through the ToolGrip lineup so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
