WB05 ToolGrip 5 lbs Tool Wrist Band, 11-Pack
The Frontline WB05 puts a tether anchor on your wrist: a high-quality polyester band with a secure, comfortable fit for all wrist sizes, closed with hook-and-loop so it stays put through a full shift.
Its D-ring gives small-tool tethers a safe, reliable attachment point rated at a 5 lb load capacity - built for comfort without compromising safety.
Who Needs This Product
This product is dropped-object prevention equipment from the Frontline ToolGrip line. Crews working at height tether their tools so a slip never becomes a struck-by incident below. ToolGrip products are rated for tools only - personal fall protection is a separate system.
Features
Universal fit
Wraps any wrist size with a secure, comfortable hold.
D-ring anchor
A dedicated attachment point right where in-hand tools live.
Hook-and-loop closure
Stays in place all shift, on and off in seconds.
Comfort-first build
Designed for comfort without compromising safety.
5 lb rating
Sized for the small tools that drop most often.
Pairs with coil or elastic
Clip a TLC05 coil or short elastic tether to the D-ring.
Technical Specifications
| SKU | WB05 |
|---|---|
| Type | Tool wrist band |
| Load capacity | 5 lbs |
| Webbing | High-quality polyester |
| D-ring | Plastic |
| Closure | Hook-and-loop |
Tool tethering equipment only - NEVER personal fall protection. ToolGrip products are rated for tools, in the capacities on the spec sheet. Never connect any ToolGrip component to a personal fall arrest or restraint system, and never exceed the rated tool weight.
Compliance Standards
ANSI/ISEA 121-2018
American National Standard for dropped object prevention solutions - the consensus standard for tool tethering equipment.
OSHA 1926.759
Falling object protection requirements in steel erection; tethering supports compliance.
OSHA General Duty Clause
Dropped-tool struck-by incidents are routinely cited under 5(a)(1); tethering is the recognized control.
Typical Applications
How to Use the WB05
Follow the manufacturer's manual. The sequence below is an overview only.
- Inspect. Check the band, closure, and D-ring before each use.
- Strap it on. Wrap the band snug and seat the hook-and-loop closure.
- Clip the tether. Connect a small-tool tether to the D-ring.
- Connect the tool. Attach the other end to the tool attachment point.
- Tug test. Verify before working at height.
Inspection and Retirement
Inspect before each use. Pull the equipment from service for any of the conditions below.
- Webbing and elastic: cuts, fraying, abrasion, burns, or loss of elasticity.
- Stitching: broken, pulled, or abraded threads.
- Hardware: deformation, cracks, corrosion, or gates and locks that fail to close.
- Attachment points: loose tape bonds, worn loops, or damaged D-rings.
- Markings: labels must be present and legible.
Remove from service immediately if any inspection point fails or after the tether arrests a dropped tool with visible damage. ToolGrip products are tool tethering equipment - never use them for personal fall protection.
Frequently Asked Questions
Frontline WB05 Submittals and Documentation
Frontline WB05 Spec Sheet (PDF)Materials, capacity, and features. WB05-11PK Frontline ToolGrip User Manual (PDF)Use, limitations, inspection, and retirement for the ToolGrip tool tethering line. WB05-11PK Frontline ToolGrip Quick Display Guide (PDF)Line overview of the ToolGrip tool tethering family. WB05-11PK Frontline Catalog (PDF)The full Frontline Fall Protection product catalog.Compatible and Related Products
- Frontline TLC05 Coil Tool Tether. The tangle-free tether for the wrist D-ring.
- Frontline ACTLWB Wrist Tool Lanyard. Band plus integrated lanyard in one.
- Frontline ACQW12 Quick Wrap Tool Tape. Create the tool-side attachment point.
Building a Dropped-Object Program?
Tethers, anchors, holsters, and pouches work as a system. Confirm your tool list and working heights with us and we will walk through the ToolGrip lineup so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
