TP10 ToolGrip 10 lbs Tool Pouch with D-Rings and Zipper, 3-Pack
The Frontline TP10 is the containment-grade pouch: a double-zipper closure keeps tools securely contained even if the pouch flips, interior metal D-rings give tethers a home, and exterior loops hold spud wrenches, bull pins, and screwdrivers at the ready.
Built from high-quality polyester with airflow ventilation to reduce moisture buildup, it attaches easily to work belts, measures 12 in L x 4 in W x 12 in H, and carries a 10 lb safe working capacity - protecting workers below by keeping tools from falling in the first place.
Who Needs This Product
This product is dropped-object prevention equipment from the Frontline ToolGrip line. Crews working at height tether their tools so a slip never becomes a struck-by incident below. ToolGrip products are rated for tools only - personal fall protection is a separate system.
Features
Full containment
The double-zipper closure means a flipped pouch is not a rain of tools.
Interior D-rings
Tether small tools inside the pouch - covered even while stowed.
Exterior tool loops
Spud wrenches, bull pins, and screwdrivers ride outside, instantly reachable.
Ventilated
Airflow reduces moisture so tools stay rust-free.
Tough build
Engineered for durability on tough jobsites.
10 lb capacity
A full working loadout, contained and tethered.
Technical Specifications
| SKU | TP10 |
|---|---|
| Type | Zippered tool pouch with tethering D-rings |
| Safe working capacity | 10 lb (4.5 kg) |
| Dimensions | 12 in L x 4 in W x 12 in H |
| Materials | High-quality polyester; metal D-rings |
| Closure | Double zipper |
| Exterior | Tool loops for wrenches, pins, screwdrivers |
| Design | Ventilated |
Tool tethering equipment only - NEVER personal fall protection. ToolGrip products are rated for tools, in the capacities on the spec sheet. Never connect any ToolGrip component to a personal fall arrest or restraint system, and never exceed the rated tool weight.
Compliance Standards
ANSI/ISEA 121-2018
American National Standard for dropped object prevention solutions - the consensus standard for tool tethering equipment.
OSHA 1926.759
Falling object protection requirements in steel erection; tethering supports compliance.
OSHA General Duty Clause
Dropped-tool struck-by incidents are routinely cited under 5(a)(1); tethering is the recognized control.
Typical Applications
How to Set Up the TP10
Follow the manufacturer's manual. The sequence below is an overview only.
- Inspect. Check fabric, zippers, D-rings, and loops before each use.
- Mount. Attach the pouch to your work belt where it rides clean.
- Tether inside. Clip small-tool tethers to the interior D-rings.
- Load the loops. Seat wrenches and pins in the exterior loops.
- Zip before you move. Close the double zipper whenever you relocate at height.
Inspection and Retirement
Inspect before each use. Pull the equipment from service for any of the conditions below.
- Webbing and elastic: cuts, fraying, abrasion, burns, or loss of elasticity.
- Stitching: broken, pulled, or abraded threads.
- Hardware: deformation, cracks, corrosion, or gates and locks that fail to close.
- Attachment points: loose tape bonds, worn loops, or damaged D-rings.
- Markings: labels must be present and legible.
Remove from service immediately if any inspection point fails or after the tether arrests a dropped tool with visible damage. ToolGrip products are tool tethering equipment - never use them for personal fall protection.
Frequently Asked Questions
Frontline TP10 Submittals and Documentation
Frontline TP10 Spec Sheet (PDF)Dimensions, capacity, materials, and features. Frontline ToolGrip User Manual (PDF)Use, limitations, inspection, and retirement for the ToolGrip tool tethering line. Frontline ToolGrip Quick Display Guide (PDF)Line overview of the ToolGrip tool tethering family. Frontline Catalog (PDF)The full Frontline Fall Protection product catalog.Compatible and Related Products
- Frontline BP10L Large Tool Pouch. The open-top speed pouch.
- Frontline TLS15 Elastic Tool Tether. Tether tools to the interior D-rings.
- Frontline HH05SW Swiveling Hammer Holster. Dedicated hammer carry beside the pouch.
Building a Dropped-Object Program?
Tethers, anchors, holsters, and pouches work as a system. Confirm your tool list and working heights with us and we will walk through the ToolGrip lineup so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
