BP10L ToolGrip 10 lbs Tool Pouch, Large, 3-Pack
The Frontline BP10L is the large workhorse of the ToolGrip pouch line: high-quality polyester with webbing loops and metal snaps that attach to a working belt in seconds, holding tools securely while keeping them accessible at all times.
A durable rope reinforcement around the top edge maintains the pouch's shape for one-handed tool returns, the ventilated design reduces moisture to keep tools in top condition, and the 10 lb safe storage capacity fills 8.75 in x 3.75 in x 7.5 in of organized space - protecting workers below from falling tools and objects.
Who Needs This Product
This product is dropped-object prevention equipment from the Frontline ToolGrip line. Crews working at height tether their tools so a slip never becomes a struck-by incident below. ToolGrip products are rated for tools only - personal fall protection is a separate system.
Features
Snap-on belt mount
Webbing loops with metal snaps go on and off the belt without unthreading.
Holds its shape
Rope-reinforced top edge stays open for one-handed tool returns.
Ventilated
Airflow reduces moisture so tools stay rust-free.
10 lb capacity
A full hand-tool loadout, contained.
Drop protection
Contained tools cannot become struck-by incidents below.
Large format
The big brother to the TP10 pouch.
Technical Specifications
| SKU | BP10L |
|---|---|
| Type | Large tool pouch |
| Materials | High-quality polyester; metal hardware |
| Safe storage capacity | 10 lbs |
| Dimensions | 8-3/4 in L x 3-3/4 in W x 7-1/2 in H |
| Attachment | Webbing loops with metal snaps |
| Top edge | Rope reinforcement |
| Design | Ventilated |
Tool tethering equipment only - NEVER personal fall protection. ToolGrip products are rated for tools, in the capacities on the spec sheet. Never connect any ToolGrip component to a personal fall arrest or restraint system, and never exceed the rated tool weight.
Compliance Standards
ANSI/ISEA 121-2018
American National Standard for dropped object prevention solutions - the consensus standard for tool tethering equipment.
OSHA 1926.759
Falling object protection requirements in steel erection; tethering supports compliance.
OSHA General Duty Clause
Dropped-tool struck-by incidents are routinely cited under 5(a)(1); tethering is the recognized control.
Typical Applications
How to Set Up the BP10L
Follow the manufacturer's manual. The sequence below is an overview only.
- Inspect. Check fabric, stitching, snaps, and the rope edge before each use.
- Mount. Snap the webbing loops over the work belt where you want the pouch to ride.
- Load. Stow tools within the 10 lb safe storage capacity.
- Tether what matters. Pair pouch storage with ToolGrip tethers for tools in active use.
- Check the snaps. Confirm both snaps are seated before working at height.
Inspection and Retirement
Inspect before each use. Pull the equipment from service for any of the conditions below.
- Webbing and elastic: cuts, fraying, abrasion, burns, or loss of elasticity.
- Stitching: broken, pulled, or abraded threads.
- Hardware: deformation, cracks, corrosion, or gates and locks that fail to close.
- Attachment points: loose tape bonds, worn loops, or damaged D-rings.
- Markings: labels must be present and legible.
Remove from service immediately if any inspection point fails or after the tether arrests a dropped tool with visible damage. ToolGrip products are tool tethering equipment - never use them for personal fall protection.
Frequently Asked Questions
Frontline BP10L Submittals and Documentation
Frontline BP10L Spec Sheet (PDF)Materials, capacity, dimensions, and features. BP10L-3PK Frontline ToolGrip User Manual (PDF)Use, limitations, inspection, and retirement for the ToolGrip tool tethering line. BP10L-3PK Frontline ToolGrip Quick Display Guide (PDF)Line overview of the ToolGrip tool tethering family. BP10L-3PK Frontline Catalog (PDF)The full Frontline Fall Protection product catalog.Compatible and Related Products
- Frontline TP10 Tool Pouch with D-Rings. The zippered pouch with tethering D-rings.
- Frontline TLS15 Elastic Tool Tether. Tether the tools you pull from the pouch.
- Frontline HH05SW Swiveling Hammer Holster. Dedicated hammer carry beside the pouch.
Building a Dropped-Object Program?
Tethers, anchors, holsters, and pouches work as a system. Confirm your tool list and working heights with us and we will walk through the ToolGrip lineup so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
