H500 Construction Standard Harness with Side D-Rings
The Construction Standard trim delivers the H500 construction feature set at the entry price: steel side and back D-rings, the flex webbing platform, standard-grade padding, and the classic mating chest and tongue leg buckles. It is positioning capability without the comfort-trim premium.
Certified to ANSI Z359.11, CSA Z259.10, and compliant with OSHA 1926.502 and 1910.140, this configuration supports a 420 lb maximum working load with breathable pressure-relief padding, smart impact indicators, and a dedicated SRL web link.
Miller Harness Sizing Chart
Height (ft) by Weight (lb)
| 110 | 130 | 150 | 170 | 190 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | 370 | 390 | 400 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6′6″ | ||||||||||||||||
| 6′4″ | XXL/XXXL | |||||||||||||||
| 6′2″ | ||||||||||||||||
| 6′ | ||||||||||||||||
| 5′10″ | UNIVERSALMost Popular Size (L/XL) | |||||||||||||||
| 5′8″ | ||||||||||||||||
| 5′6″ | ||||||||||||||||
| 5′4″ | ||||||||||||||||
| 5′2″ | S/M | |||||||||||||||
| 5′ |
S/M fits workers up to 5 ft 10 in and 170 lb, or up to 190 lb at 5 ft 6 in and under. Universal (L/XL) covers the broad middle and is the most popular size. XXL/XXXL fits workers over 6 ft who weigh over 270 lb, and any worker from 350 to 400 lb. Lighter boundary bands are overlap zones where either size fits: size down for a trim fit or up for room over layers. Some Miller spec sheets list these as Size 1 (S/M), Size 2 Universal (L/XL), and Size 3 (2XL and 3XL). Based on the manufacturer's published Miller sizing chart; verify fit per the user manual before first use.
Who Needs This Product
The Construction Standard side-D harness is for crews that need positioning rings on every worker but watch the per-unit price: the same certified platform, side rings, and buckle layout as the Comfort trim, with standard padding. Full-day wearers who feel the harness by lunch should step up to the H5CC31102 Comfort version with the integrated belt.
Features
Side Positioning D-Rings
Hip-level steel D-rings accept a positioning lanyard for hands-free work at a fixed location.
Standard Padding
Breathable standard-grade padding keeps the price down for crews with mixed or occasional at-height exposure.
Integrated Work Belt
The built-in belt carries tool bags on the hips and keeps them positioned where the worker expects them.
Construction Comfort Padding
Ergonomic breathable padding at the shoulders, back, and waist is sized for all-day construction wear.
Smart Impact Indicators
Clearly identifiable indicators show at a glance whether the harness has been loaded in a fall.
Dedicated SRL Web Link
A purpose-built web link at the dorsal position attaches personal SRLs cleanly, keeping the D-ring free.
Technical Specifications
| SKU | H5CS31102 family |
|---|---|
| Product | H500 Construction Standard Full Body Harness |
| Sizes | Universal (OS), 2XL |
| Color | Green |
| D-rings | Dorsal (back) plus two side positioning D-rings, steel |
| Chest buckle | Mating |
| Leg buckles | Tongue |
| Belt | Integrated work belt |
| Adjustment points | 5 (chest, shoulders, legs) |
| Webbing | Flexible formulated polyester |
| Padding | Standard-grade breathable shoulder/back padding |
| Max working load | 420 lb / 190 kg including all clothing, tools, and equipment |
| Packaging | Boxed |
| Country of origin | Mexico |
| Standards | ANSI Z359.11; OSHA 1926.502; OSHA 1910.140; CSA Z259.10 |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
Sizes and Ordering Information
| Size | SKU | UPC |
|---|---|---|
| Universal (OS) | H5CS311022 | 612230241834 |
| 2XL | H5CS311023 | 612230241841 |
Both stocked sizes are selectable from the size options above. An S/M and a black version are made by the vendor; contact us for availability.
Side D-rings are for positioning only. Connect fall arrest to the dorsal D-ring, back up every positioning connection with an independent fall arrest system, and rig positioning so free fall is limited to 2 ft per OSHA 1926.502(e). Check the impact indicators before every use.
Compliance Standards
ANSI Z359.11
Certified to the ANSI/ASSE Z359.11 standard for full body harnesses, covering design, testing, and marking requirements.
OSHA 1926.502 and 1910.140
Meets OSHA requirements for personal fall arrest system body wear in both construction and general industry.
CSA Z259.10
Certified to CSA Z259.10 for full body harnesses, marked for use on Canadian jobsites.
OSHA 1926.502(e)
The side D-rings support work positioning systems rigged to limit free fall to 2 ft, as OSHA requires for positioning device systems.
Typical Applications
Donning Overview
- Hold the harness by the back D-ring and shake it out so the straps hang free without twists.
- Slip the shoulder straps on like a vest, keeping the webbing flat against the body.
- Connect the chest buckle and position the chest strap across the middle of the chest.
- Fasten each leg buckle so the strap allows a flat hand between the strap and the leg, but not a fist.
- Work through all five adjustment points until the dorsal D-ring rests between the shoulder blades, then stow the strap ends.
Full donning and adjustment instructions are in the Miller harness manual linked in the documentation section below.
Inspection and Retirement
Inspect this harness before each use, and have a competent person other than the user formally inspect it at least annually per ANSI Z359.2. Check each point below and record the results on the inspection form linked in the documentation section.
- Webbing: cuts, frays, burns, chemical damage, UV fading, or broken stitching anywhere on the harness.
- Hardware: D-rings and buckles for cracks, corrosion, distortion, or sharp edges.
- Adjusters and keepers: slippage, missing keepers, or strap ends that will not stay stowed.
- Labels: present and legible, including the size, standards, and serial information.
Retirement triggers: any fall arrest event, any webbing or hardware defect found during inspection, or any condition where the inspector cannot positively verify the harness is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller H5CS31102 H500 Harness Submittals and Documentation
H5CS31102 Specification Sheet (PDF)Technical data, sizing, materials, and SKU-level UPC information. H5CS31102 User Instruction Manual (PDF)Miller I119 manual: donning, adjustment, use limitations, and inspection criteria. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. H5CS31102 Harness Inspection Form (PDF)Printable pass/fail checklist for documented harness inspections.Compatible and Related Products
- Miller H500 Industry Harness, Tongue Legs. The Industry Standard entry to the H500 platform.
- Miller T4577 Titan II Contractor Harness. The budget contractor harness with pads and belt.
- Guardian 10733 Suspension Trauma Strap, 4-Pack. Add a trauma relief strap to every harness on the crew.
Outfitting a Construction Crew?
Padding, D-ring layout, and sizing decide the right configuration. Confirm your crew with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
