Name: Super Anchor DW Door and Window Safety Bar Temporary Anchor
Brand: Super Anchor
SKU: 1096
Price: 582 USD
Availability: InStock

Description
Warranty Information
Reviews

Super Anchor Temporary Anchors

Super Anchor DW Door and Window Safety Bar Temporary Anchor

The Super Anchor DW Safety Bar is a heavy duty door and window jamb anchor for interior tie-off protection using a window or door opening. The bar is placed against the frame and adjusts to the vertical sides to give a safe, secure, temporary anchor point. It fits openings from 24 to 48 inches wide.

The DW Safety Bar is fully adjustable, lightweight aluminum, and easy to install. It provides a single user tie-off point for use with a vertical lifeline or self-retracting lifeline, and it works during construction or in finished structures.

Super Anchor DW Safety Bar temporary door and window jamb anchor, adjustable aluminum

5,000 lbAnchorage Strength

3,600 lbConnector Gate Strength

1 PersonCapacity

24 to 48 inOpening Range

AluminumLightweight Build

6 ftMax Free Fall

TemporaryReusable Anchor

InteriorDoor or Window

Who Needs This Product

The DW Safety Bar is a temporary interior anchor for trades that need a reusable tie-off point where a door or window opening is available. It suits construction and work in finished structures where a permanent anchor is not wanted. Complete the system with a full-body harness and a vertical lifeline or self-retracting lifeline.

Features

Uses a door or window opening

Braces against the frame and adjusts to the vertical sides for a secure temporary anchor.

Fits 24 to 48 inch openings

One adjustable bar covers a wide range of common door and window widths.

Lightweight aluminum

Easy to carry and install by one worker.

Single user tie-off

Provides one tie-off point for a vertical lifeline or self-retracting lifeline.

Interior or finished use

Works during construction and in finished structures with no permanent hardware.

Fully adjustable

Adjusts to the opening for a snug, secure fit.

⚠

This is a single user temporary anchor, not a complete system. Confirm the door or window frame can support the load, use a full-body harness with a vertical lifeline or self-retracting lifeline, and confirm fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

OSHA 29 CFR 1926.502

Federal construction fall protection anchorage requirements.

ANSI and CSA

Complies with applicable ANSI and CSA anchorage standards.

Typical Applications

Interior constructionTemporary tie-off through a door or window opening.

Window installationAnchor point while setting windows.

Finished structuresReusable anchor with no permanent hardware.

MaintenanceShort term interior work at height.

How to Install the DW Safety Bar

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

Select the opening. Choose a sound door or window opening between 24 and 48 inches wide.
Position the bar. Place the bar against the frame across the opening.
Adjust. Extend the bar to the vertical sides for a snug, secure fit.
Connect. Attach your vertical lifeline or self-retracting lifeline to the anchor point.
Verify. Confirm the bar is secure, connect your harness, and confirm fall clearance.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

Bar and end contacts: cracks, deformation, corrosion, or bent sections.
Adjustment mechanism: worn, loose, or damaged locking parts.
Anchor point: burrs, sharp edges, or excessive wear.
Labels: illegible or missing product identification.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	1096
Manufacturer Part Number	1096
Type	Temporary door and window jamb anchor
Material	Lightweight aluminum
Opening range	24 to 48 in wide
Capacity	1 person
Anchorage strength	5,000 lb (22 kN)
Connector gate strength	3,600 lb
Max free fall	6 ft per ANSI Z359.1
Use with	Vertical lifeline or self-retracting lifeline
Standards	OSHA 1926.502; ANSI and CSA
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What opening sizes does it fit?

The bar adjusts to fit door and window openings from 24 to 48 inches wide. The specifications listed on this page outline the build details you need for your application. Only trained workers should select, install, and use fall protection equipment for its intended application.

How many workers can use it?

One person. It provides a single user tie-off point. Inspect it before every use, and retire it right away if you find corrosion, cracks, or bent components. If you have any doubt about the correct setup, consult a qualified person or the manufacturer instructions before putting the system into service.

What do I connect to it?

A vertical lifeline or a self-retracting lifeline, attached to a full-body harness. A correct installation is critical, so confirm the setup matches the manufacturer instructions before any worker ties off. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.

Can I use it in a finished building?

Yes. It uses the door or window opening and leaves no permanent hardware, so it works in finished structures. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.

What is it made of?

Lightweight aluminum, so one worker can carry and install it. Follow the recommended fastener pattern and placement so the connection is secure, and re-check the installation before you rely on it for fall arrest. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

How much free fall does the system allow?

Rig to limit free fall to 6 feet per ANSI Z359.1, and confirm your fall clearance. Confirm each component in the system is compatible and rated for the intended use before connecting to it. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.

Do I need a harness with this anchor?

Yes. The bar is an anchorage point only and must be paired with a full-body harness and a connecting device. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

Super Anchor DW Safety Bar Submittals and Documentation

Door and Window Safety Bar Manual (PDF)Use, installation, capacity, and inspection. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

Need a Temporary Interior Anchor?

Opening size, frame strength, and the connecting device all affect a safe tie-off. Confirm your application with us and we will help match the DW Safety Bar with the right lifeline and harness.

Call 863-703-4522 to talk to a fall protection specialist.

Super Anchor Safety Manufacturer Warranty

Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.

Permanent Anchor Warranty

Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.

See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.

0 Reviews Hide Reviews Show Reviews