Super Anchor Front D-Ring Full Body Harness, FD-6071
The Super Anchor FD-6071 is a full body harness that adds a front D-ring for ladder climbing, rescue, and controlled descent applications, along with a dorsal fall-arrest D-ring. The front D-ring lets a worker connect a ladder-safety or descent device at the chest.
The FD-6071 uses Hi-Viz webbing and is offered in Medium through X-Large. It is certified to ANSI Z359.11.
Who Needs This Product
The FD-6071 is a front D-ring harness for workers who climb fixed ladders or use descent and rescue systems that connect at the chest. Complete the system with the appropriate ladder-safety, descent, or fall-arrest connecting device and a rated anchor.
Features
Front D-ring
A sternal front D-ring for ladder climbing, rescue, and controlled descent.
Dorsal fall-arrest D-ring
Rear D-ring for personal fall arrest.
Hi-Viz webbing
High strength, high visibility polyester webbing.
Sizes M to XL
Medium, Large, and X-Large.
Fall indicators
Visible sign of a fall event during inspection.
ANSI Z359.11
Meets the American National Standard for full body harnesses.
Use the front D-ring only for ladder climbing, rescue, or controlled descent, and the dorsal D-ring for fall arrest.
Compliance Standards
ANSI Z359.11
American National Standard for full-body harnesses.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
Typical Applications
How to Use the Front D-Ring Harness
Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.
- Inspect. Check all webbing, stitching, hardware, and fall indicators before each use.
- Don the harness. Step in, pull it up, and connect the chest and leg buckles.
- Adjust the fit. Snug all straps so both D-rings sit correctly.
- Connect. Use the front D-ring for ladder-safety or descent devices, and the dorsal D-ring for fall arrest.
- Verify clearance. Confirm anchorage, connectors, and fall clearance before working at height.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.
- Webbing: cuts, frays, abrasion, burns, or chemical damage.
- Stitching: pulled, cut, or broken threads.
- Hardware: front and dorsal D-rings, buckles, and keepers for distortion, cracks, corrosion, or sharp edges.
- Fall indicators: any sign of deployment.
- Labels: illegible or missing markings.
Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | FD-6071-M/L/XL |
|---|---|
| Manufacturer Part Number | FD-6071 series |
| Type | Front D-ring full body harness |
| D-rings | Sternal front plus dorsal rear |
| Webbing | High strength Hi-Viz polyester |
| Capacity | 310 lb |
| Sizes | Medium, Large, X-Large |
| Standards | ANSI Z359.11; OSHA 1926.502 |
| Warranty | Super Anchor Safety manufacturer warranty; see Warranty tab |
Frequently Asked Questions
Front D-Ring Harness Submittals and Documentation
Super Anchor 3 D-Ring Harness Manual 2025 (PDF)Use, fitting, capacity, and inspection.Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.Related Super Anchor Products
Need Front D-Ring Harnesses?
Front D-ring use, size, and connecting devices affect the right setup. Confirm your ladder or rescue application with us and we will help match the right harness and devices.
Call 863-703-4522 to talk to a fall protection specialist.
Super Anchor Safety Manufacturer Warranty
Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.
Permanent Anchor Warranty
Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.
See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.
