FallTech 721560R FT-R 3-Way SRL-R, 60 ft Cable, Class 1

(No reviews yet) Write a Review
$2,675.00
Brand:
FallTech
SKU:
721560R
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
FallTech FT-R Series

721560R FT-R 3-Way SRL-R, 60 ft Cable, Class 1

The FallTech 721560R FT-R 3-Way Retrieval SRL-R combines a 60 ft self-retracting lifeline with integral hand-crank rescue in one Class 1 device. The 3/16 in galvanized steel cable carries 3,400 lb minimum static strength, and the unit mounts to FallTech tripods and modular davit systems or connects to overhead anchorage.

When a fall occurs, the attendant pulls the release pin to engage the retrieval handle: rotating clockwise lowers the worker in a controlled descent and counterclockwise raises them steadily to safety, with no extra tools or equipment. Per the sell sheet it runs over 30 percent lighter than comparable SRL-Rs, and it is certified to ANSI Z359.14-2021 and CSA Z259.2.2-2017.

FallTech 721560R CTR SRL with galvanized cable and swivel snap hook
3,600 lbMinimum Static Strength
1,350 lbMaximum Average Arrest Force
60 ftGalvanized Cable Lifeline
3-WayArrest, Raise, and Lower
Class 1Overhead Anchorage Rating
130-310 lbANSI User Capacity
ANSI Z359.142021 Certified SRL-R
CSA Z259.2.2Canadian Certification

Who Needs This Product

Confined space teams that must build rescue into the entry plan. OSHA 1910.146 requires a means of rescue before anyone enters a permit space, and a 3-way SRL-R is the standard answer: it protects the worker during entry and descent, then converts to a winch the attendant can operate immediately if something goes wrong. The FT-R version brings the platform's lighter housing to a device category where transport weight is a daily complaint.

Features

Dual-mode functionality

Seamless transition from fall arrest to emergency retrieval: pull the release pin, engage the handle, and begin raising or lowering with no extra tools or equipment.

Integral hand crank

Clockwise rotation lowers the worker in a controlled descent; counterclockwise raises them steadily to the entry point, per the MCS11 manual.

Over 30 percent lighter

The compact, rugged housing runs over 30 percent lighter than comparable SRL-Rs, easing transport to the manhole and speeding setup.

Tripod and davit mounting

Mounts to FallTech tripods and modular davit systems with the matching bracket, or connects to overhead anchorage.

Galvanized steel lifeline

60 ft of 3/16 in galvanized cable rated to 3,400 lb minimum static strength for repeated entry work.

UV and scratch resistant labels

Labeling stays legible through jobsite wear, keeping the device inspectable and in service.

Safety first. A retrieval SRL-R is one part of a permit-required confined space program. OSHA 1910.146 requires an attendant, a rescue plan, and retrieval equipment before entry; rig this device to its tripod or davit per the MCS11 manual, and never enter a permit space without the attendant able to operate the retrieval function immediately.

Compliance Standards

ANSI Z359.14-2021

Certified as a Class 1 SRL-R per the declaration of conformity listing 721560R, with average arrest force of 1,350 lb or less.

OSHA 1910.140 and 1926.502

Satisfies OSHA general industry and construction requirements for personal fall arrest connecting devices.

OSHA 1910.146

Supports permit-required confined space retrieval requirements when rigged with a compliant tripod or davit system.

CSA Z259.2.2-2017

Certified to the Canadian standard for self-retracting devices per the CSA declaration listing 721560R.

Applications

Permit-required confined spacesTanks, tunnels, vaults, and manholes where OSHA 1910.146 requires retrieval capability before entry.
Tripod entry systemsMounts to FallTech tripods over vertical entries with the matching device bracket.
Davit arm systemsPairs with FallTech modular davits for offset entries and tight setups.
Municipal and utility workWater, sewer, and electrical vault entries where crews carry the device between sites daily.
Industrial maintenanceVessel and pit entries in plants with rescue-ready staffing requirements.
Canadian jobsitesCSA Z259.2.2 certification covers crews under Canadian regulation.

How to Use

The FT-R SRL-R protects the entrant on the way down and becomes the rescue winch the moment it is needed.

  1. Inspect first. Check housing, cable, hook, crank mechanism, and indicators per the MCS11 manual before every entry.
  2. Mount the device. Install on the FallTech tripod or davit with the matching bracket, or connect to overhead anchorage rated per OSHA.
  3. Connect the entrant. Attach the swivel snap hook to the dorsal D-ring and confirm the gate is closed and locked.
  4. Attend the entry. The lifeline pays out and retracts with the worker; the attendant monitors from the entry point throughout.
  5. Rescue if needed. Pull the release pin and engage the handle: clockwise lowers, counterclockwise raises the worker to safety in a controlled motion.

Inspection and Service Life

OSHA requires inspection before each use, and ANSI Z359.14-2021 adds formal inspection by a competent person on the manufacturer schedule in the MCS11 manual. Log formal inspections so the service history follows the device.

  • Housing and handle: check for cracks, deformation, and free crank rotation in both directions
  • Lifeline: extend the working length and check the galvanized cable for kinks, birdcaging, broken wires, and corrosion
  • Retrieval mechanism: verify the release pin engages and disengages positively per the manual
  • Hook: confirm the swivel snap hook gate closes, locks, and swivels freely
  • Labels: verify all labels are present and legible, including retrieval operation markings

Remove the device from service immediately if it has arrested a fall or performed a rescue until a competent person inspects it, and destroy retired equipment so it cannot return to service.

Product Video

FallTech 721560R FT-R SRL-R product video preview Watch: Frontline Confined Space Davit Arm System

See the Frontline davit arm system set up for confined-space entry and non-entry rescue retrieval.

Who Needs This Product

This product is a confined space davit system - the rotating retrieval point that lowers and recovers workers and material over an opening. Confined space teams, utilities, and tank crews build their entry and non-entry rescue around it. It requires a rated winch or 3-way SRL, a full body harness, and a written rescue plan to form a complete system.

Features

360-degree boom

Swing the load over the opening and away to the landing zone.

Two integrated pulleys

Run a fall arrest SRL and a retrieval winch line simultaneously.

Permanent base options

Mount to steel, concrete, or a truck bed for mobile rescue.

Made in the USA

Patriot-line build for Buy American specs.

Removable boom

Lift the boom out when the entry point is not in use.

Tank and edge ready

Reaches over tank rims and leading edges.

Fall Protection Distributors logo Fall Protection
Distributors, LLC
Free Tool · No Signup · OSHA 1926.502
Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeClass 1 3-Way Retrieval Self-Retracting Lifeline (SRL-R)
SKU721560R
Lifeline60 ft, 3/16" galvanized steel cable; 3,400 lb min. static strength
RetrievalIntegral hand crank; pull-pin engagement; raise and lower
Device Static Strength3,600 lb minimum
Average Arrest Force1,350 lb maximum
ConnectorSteel swivel snap hook
MountingFallTech tripods and modular davits, or overhead anchorage
ANSI User Capacity130 to 310 lb including clothing and tools
StandardsANSI Z359.14-2021; OSHA 1910.140, 1926.502, 1910.146 support; CSA Z259.2.2-2017
Compatible Brackets7281, 7278 series per FallTech published data
WarrantyFallTech 2-year manufacturer warranty, honored through Fall Protection Distributors

Frequently Asked Questions

What does 3-way mean on the 721560R?
It covers three functions in one device: fall arrest during entry, controlled lowering, and hand-crank raising for rescue. The attendant pulls the release pin to switch from arrest mode to retrieval mode, then cranks clockwise to lower or counterclockwise to raise the worker.
Does this satisfy OSHA confined space retrieval requirements?
It is the retrieval device piece of an OSHA 1910.146 compliant setup. Pair it with a tripod or davit, an attendant trained to operate it, and a written rescue plan; the regulation requires retrieval capability before anyone enters a permit-required space.
What tripods and davits does it mount to?
FallTech tripods and modular davit systems using the 7281 and 7278 series brackets per FallTech published data. It can also connect directly to overhead anchorage as a Class 1 SRL.
What standards does the 721560R meet?
ANSI Z359.14-2021 as a Class 1 SRL-R and CSA Z259.2.2-2017, both documented in declarations of conformity that list 721560R by SKU, linked in the submittals below.
What is the user capacity?
130 to 310 lb including clothing and tools per ANSI Z359.14-2021, with average arrest force limited to 1,350 lb.
How is it different from the DuraTech 3-way SRL-R?
Same job, lighter package: FallTech rates the FT-R platform at over 30 percent lighter than comparable SRL-Rs, which matters when the device gets carried between vault entries all day. It also brings the FT-R line's smooth payout and UV-resistant labeling.
How often does it need inspection?
Before each use, plus formal competent-person inspection per the MCS11 manual schedule. After any fall arrest or rescue use, remove it from service until a competent person clears it.

Order the FallTech 721560R CTR Today

Every FallTech SRL we stock ships fast and arrives with full documentation for your safety file. Not sure which length or class fits your work? Our fall protection specialists size retractables every day.

Call 863-703-4522 for expert help Specifying the right SRL for your application, or order online now for delivery based on the delivery location.

FallTech 2-Year Manufacturer Warranty. FallTech warrants this product against defects in materials and workmanship for two years from the date of purchase. Fall Protection Distributors, LLC passes the full manufacturer warranty through to the original purchaser.

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products