FallTech Confined Space Retrieval Yoke, 2-Pack

(No reviews yet) Write a Review
$176.00
Brand:
FallTech
SKU:
8208-2PK
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
FallTech Confined Space

FallTech Confined Space Retrieval Yoke, 2-Pack

Features jacketed aluminum spreader bar with 12" width to fit narrow points of egress. Accurately designed for keeping victim upright during rescue applications.

For use with shoulder D-ring harnesses. Includes plated alloy steel snap hooks and D-ring.

FallTech 8208 Confined Space Retrieval Yoke, 2-Pack
310 lbUser Capacity
5,000 lbStatic Strength
12 inSpreader Bar Width
AluminumJacketed Bar
Alloy SteelHooks and D-Ring
UprightVictim Position
2.4 lbYoke Weight
2-PackThis Listing

Who Needs This Product

Safety managers and crew leads keep factory replacement parts and accessories on hand so a worn pin, sheave, or bracket never takes a confined space system out of service. Using genuine FallTech parts keeps the system within its certification and warranty.

Features

Features jacketed aluminum spreader bar

Features jacketed aluminum spreader bar with 12" width to fit narrow points of egress.

Accurately designed for keeping victim

Accurately designed for keeping victim upright during rescue applications.

For use

For use with shoulder D-ring harnesses.

Includes plated alloy steel snap

Includes plated alloy steel snap hooks and D-ring.

Meets OSHA 1926.502 and 1910.66

Meets OSHA 1926.502 and 1910.66 regulations.

Genuine parts keep the certification. Substituting non-factory hardware voids the system certification and the FallTech warranty. Match the part number to your system model before ordering.

Compliance Standards

OSHA 1926.502

Applicable requirement for this equipment: OSHA 1926.502 and 1910.66.

1910.66

Applicable requirement for this equipment: OSHA 1926.502 and 1910.66.

OSHA 1910.146

Permit-required confined space regulation that drives retrieval and rescue equipment requirements for entry work.

Typical Applications

Scheduled maintenancePlanned service of tripod and davit systems.
Inspection findingsReplacing worn or lost hardware found during inspections.
Spare kitsOutfitting spares for multi-crew operations.
Downtime preventionKeeping systems in service instead of waiting on parts.

How to Use

Follow the FallTech instruction manual. The sequence below is an overview only.

  1. Match the part. Confirm the part number fits your system model before ordering.
  2. Install per the manual. Follow the FallTech manual for your system.
  3. Log the change. Record the replacement in your equipment inspection log.

Inspection and Retirement

Inspect replacement parts on the same schedule as the parent system.

  • Wear: check contact surfaces and moving parts before each use.
  • Deformation: no bending, cracking, or elongation.
  • Corrosion: no rust or pitting that affects function.

Replace any part that fails inspection, and re-verify the parent system before returning it to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC
Free Tool · No Signup · OSHA 1926.502
Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypePersonnel Retrieval Yoke
SKU8208-2PK
Static Strength5,000 lb min. Static Strength
ANSI User Capacity130 to 310 lb max.
OSHA User Capacity130 to 310 lb max.
WebbingPolyester; 5,000 lb min. static strength
D-ringPlated alloy steel; 5,000 lb min. static strength
ConnectorsPlated alloy steel; 5,000 lb min. static strength with 3,600 lb gate strength
StandardsOSHA 1926.502 and 1910.66
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

Which systems does this part fit?
12" wide with spreader bar
Is this a genuine FallTech part?
Yes. It is a factory part, which keeps your system inside its certification and warranty. Aftermarket substitutes void both.
When should this part be replaced?
Replace it whenever a pre-use or annual inspection finds wear, deformation, corrosion, or lost hardware, and record the replacement in your equipment log.
Do I need tools for installation?
Installation follows the system manual and typically needs only basic hand tools. No special tooling is required.
Can I stock spares for multiple crews?
Yes, and it is a good practice. This listing ships as a multi-pack sized so spare hardware is on the shelf when an inspection takes a component out of service.
What inspection does the part require?
Inspect it on the same schedule as the parent system, before each use and at least annually by a competent person.
Does using this part affect my warranty?
No. Genuine FallTech replacement parts maintain the product warranty. The FallTech warranty covers defects in materials and workmanship for two years.

Specifying Confined Space Equipment for Your Crew?

The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech provides a 2-year limited warranty against defects in materials and workmanship on the FallTech product. The warranty is void if the product is altered, misused, or damaged by neglect, abuse, or accident, and it excludes normal wear. Fall Protection Distributors, LLC passes through the manufacturer warranty to the original purchaser.

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products