FallTech Confined SpaceFallTech DuraTech 3-Way Bracket Assembly Repair Part, 60 ft
Bracket fits 7275 and 7276 Tripod leg brackets. Plated carbon steel construction throughout.
7275, 7276Tripod Fit
60 ftDuraTech SRL-R
Plated SteelConstruction
8 lbBracket Weight
Who Needs This Product
Safety managers and crew leads keep factory replacement parts and accessories on hand so a worn pin, sheave, or bracket never takes a confined space system out of service. Using genuine FallTech parts keeps the system within its certification and warranty.
Features
Bracket fits 7275 and 7276
Bracket fits 7275 and 7276 Tripod leg brackets.
Plated carbon steel construction throughout
Plated carbon steel construction throughout.
⚠
Genuine parts keep the certification. Substituting non-factory hardware voids the system certification and the FallTech warranty. Match the part number to your system model before ordering.
Compliance Standards
OSHA 1910.146
Permit-required confined space regulation that drives retrieval and rescue equipment requirements for entry work.
Typical Applications
Scheduled maintenancePlanned service of tripod and davit systems.
Inspection findingsReplacing worn or lost hardware found during inspections.
Spare kitsOutfitting spares for multi-crew operations.
Downtime preventionKeeping systems in service instead of waiting on parts.
How to Use
Follow the FallTech instruction manual. The sequence below is an overview only.
- Match the part. Confirm the part number fits your system model before ordering.
- Install per the manual. Follow the FallTech manual for your system.
- Log the change. Record the replacement in your equipment inspection log.
Inspection and Retirement
Inspect replacement parts on the same schedule as the parent system.
- Wear: check contact surfaces and moving parts before each use.
- Deformation: no bending, cracking, or elongation.
- Corrosion: no rust or pitting that affects function.
Replace any part that fails inspection, and re-verify the parent system before returning it to service.
Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator › Technical Specifications
| Type | SRL-R Bracket |
|---|
| SKU | 7286B |
|---|
| Bracket | Plated carbon steel |
|---|
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
|---|
Frequently Asked Questions
Which systems does this part fit?
For FallTech tripods
Is this a genuine FallTech part?
Yes. It is a factory part, which keeps your system inside its certification and warranty. Aftermarket substitutes void both.
When should this part be replaced?
Replace it whenever a pre-use or annual inspection finds wear, deformation, corrosion, or lost hardware, and record the replacement in your equipment log.
Do I need tools for installation?
Installation follows the system manual and typically needs only basic hand tools. No special tooling is required.
Can I stock spares for multiple crews?
Yes. Many customers keep one spare per crew so a failed inspection never idles a system.
What inspection does the part require?
Inspect it on the same schedule as the parent system, before each use and at least annually by a competent person.
Does using this part affect my warranty?
No. Genuine FallTech replacement parts maintain the product warranty. The FallTech warranty covers defects in materials and workmanship for two years.
Complete Your Confined Space System
Specifying Confined Space Equipment for Your Crew?
The right system depends on the portal, the depth, and your rescue plan. Confirm your application with us and we will make sure every component matches before it ships.
Call 863-703-4522 to talk to a fall protection specialist.
FallTech 2-Year Limited Warranty. FallTech warrants to the buyer that all products are free from defects in material and workmanship at the time of shipment. Obligation is limited to product replacement for two (2) years from the date of installation or use by the owner, not to exceed two (2) years from the date of shipment. This warranty is not transferable and is void if the product is changed, altered, or used in a manner other than intended. It covers defects in material and workmanship only; it does not cover normal wear and tear, neglect, abuse, or accident. The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the FallTech product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.