FallTech Harness SRL-P Tunnel Adapter, 3-Pack
Self-closing with triple-locking gate function and 1/2" open capacity. Alignment clip secures placement of twin SRLs interlocking through dorsal harness webbing.
Carabiner and alignment clip also facilitate pairing of single-leg SRLs into twin-leg set-up. 3-3/8" x 1-1/8" inside dimensions.
Who Needs This Product
Every connection in a fall protection system runs through a rated connector, and OSHA requires them to be self-closing and self-locking. FallTech's Z07 series carabiners carry 3,600 lb gate ratings in steel and aluminum with triple-lock gates, sized from 7/8 in up to 2-1/4 in openings for everything from D-rings to angle iron.
Features
Self-closing
Self-closing with triple-locking gate function and 1/2" open capacity.
Alignment clip secures placement of
Alignment clip secures placement of twin SRLs interlocking through dorsal harness webbing.
Carabiner and alignment clip also
Carabiner and alignment clip also facilitate pairing of single-leg SRLs into twin-leg set-up.
3-3/8" x 1-1/8" inside dimensions
3-3/8" x 1-1/8" inside dimensions.
Meets OSHA 1926.502 and 1910.66
Meets OSHA 1926.502 and 1910.66 Regulations.
Compatibility kills or saves. A connector must fully close and lock on its mating hardware; a gate resting on an oversized member can roll out under load. Match the gate opening to the hardware and load the spine only.
Compliance Standards
OSHA 1926.502
Applicable requirement for this equipment: OSHA 1926.502 and 1910.66.
1910.66
Applicable requirement for this equipment: OSHA 1926.502 and 1910.66.
OSHA 1926.502
Construction fall protection criteria for personal fall arrest system components, including connectors, lanyards, and lifelines.
Typical Applications
How to Use
Follow the FallTech instruction manual. The sequence below is an overview only.
- Match the opening. Choose the gate size for what you are clipping: 7/8 in for D-rings, 2-1/4 in for angle and pipe.
- Check compatibility. The connector must close and lock fully on the mating hardware with no side-loading.
- Triple-lock to open. Twist and pull the gate per the Z07 design; it self-locks on release.
- Load the spine. Keep loads on the major axis, never across the gate.
Inspection and Retirement
Inspect before each use, with a documented competent person inspection at least annually.
- Gate: closes and locks by itself from any position.
- Body: no cracks, deep nicks, or corrosion.
- Rivets and springs: tight and functional.
Retirement triggers: any fall loading, a gate that fails to self-lock, or visible damage.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | 3-3/8" Alloy Steel |
|---|---|
| SKU | 5075-3PK |
| Static Strength | 5,000 lb min. |
| OSHA User Capacity | 130 to 310 lb max. |
| Connector | Plated alloy steel; 5,000 lb min. static strength with 3,600 lb gate strength |
| Standards | OSHA 1926.502 and 1910.66; CSA Z259.12-2016 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 5075 Submittals and Documentation
5075-3PK Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 5075-3PK Spec Sheet (PDF)Full specifications, features, and compliance summary for submittal packages.Complete Your Fall Protection System
- FallTech Internal Shock Absorbing Lanyard, 6 ft Single. The everyday internal EAL.
- FallTech Dorsal D-Ring Extender, Web. One-handed dorsal access.
- FallTech 3 ft Lanyard with Rope Adjuster. Rope adjuster lanyards for every grab style.
- FallTech Vertical Lifeline, 75 to 500 ft, 5/8 in Rope. Long lifelines to 500 ft.
Specifying Lanyards and Connectors for Your Crew?
Hook styles, free fall ratings, webbing families, and clearances: call us and we will match the connector to the trade before it ships. Confirm your application with us and we will make sure every component matches before it ships.
Call 863-703-4522 to talk to a fall protection specialist.
