LPO62RADJ Combat 6 ft Tie-Back Twin Leg Lanyard, Rebar Hooks, 2-Pack
The Frontline LPO62RADJ is a twin leg shock absorbing lanyard with tie-back capability: each leg can wrap a structural member and clip back onto itself, turning any rated beam or rebar curtain into an anchor point without a separate anchorage strap.
Rated for fall arrest, work positioning, and tie-back applications onto structural members rated 5,000 lbs or above, with length adjustability and every hook 100 percent proof loaded to 3,600 lbs. One snap hook makes the harness connection; the leg ends carry rebar hooks for the wrap. Alloy steel hardware, zinc plated; 1 in polyester webbing with high-tenacity stitching; 310 lb capacity. ANSI Z359.3-2019, OSHA 1926 and 1910.
Who Needs This Product
This product is a triple-duty connecting device: fall arrest, work positioning, and tie-back anchorage in one twin leg lanyard. Ironworkers and concrete crews wrap a leg around the member, clip it back on itself, and keep moving - 100 percent tied off with no extra anchor hardware. You still need a full body harness to complete the system.
Features
Tie-back rated
Wrap the leg and clip back on itself onto any member rated 5,000 lbs or above - the lanyard IS the anchor strap.
Rebar hooks for the wrap
Large-throat tie-back rated rebar hooks capture the member and clip back on the leg.
Adjustable legs
Length adjustability tunes the working radius for positioning work.
100 percent tie-off
Twin legs leapfrog anchor to anchor with no unprotected moment.
Proof loaded hooks
Every hook individually proof loaded to 3,600 lbs.
Triple rated
Fall arrest, work positioning, and tie-back in one tool.
Technical Specifications
| SKU | LPO62RADJ |
|---|---|
| Type | Twin leg tie-back shock absorbing lanyard, adjustable |
| Ratings | Fall arrest; work positioning; tie-back onto members rated 5,000 lbs or above |
| Webbing | Polyester, 1 in |
| Stitching | High-tenacity polyester |
| Hardware | Alloy steel, zinc plated |
| Proof load | 100 percent proof loaded to 3,600 lbs |
| Max capacity | 310 lbs (one worker) |
| Standards | ANSI Z359.3-2019; OSHA 1926; OSHA 1910 |
Tie-back only onto rated structure. The wrap-and-clip-back move is rated exclusively onto structural members of 5,000 lbs or above, rigged per the Frontline manual - and only with these tie-back rated hooks. Never tie back a standard lanyard. Verify clearance below before every connection; run the calculator below.
Compliance Standards
ANSI Z359.3-2019
American National Standard for positioning and travel restraint systems. Third-party test report linked in Submittals.
OSHA 29 CFR 1926.502
Federal construction fall protection criteria.
OSHA 29 CFR 1910.140
General industry personal fall protection system requirements.
Typical Applications
How to Use the LPO62RADJ
Follow the manufacturer's manual. The sequence below is an overview only.
- Inspect. Check webbing, adjusters, absorber, and all hooks before each use.
- Connect the center. Attach the absorber end to the dorsal D-ring of a full body harness.
- Wrap and tie back. Pass a leg around a member rated 5,000 lbs or above and clip the hook back onto its own leg per the manual.
- Leapfrog. Connect the second leg to the next member before releasing the first.
- Verify clearance. Confirm fall clearance including absorber deployment - run the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least every 6 months. Pull the equipment from service for any of the conditions below.
- Webbing: cuts, fraying, abrasion, burns, chemical damage, or stiffness.
- Adjuster and hardware: deformation, cracks, corrosion, slipping adjusters, or gates that fail to lock.
- Stitching: broken, pulled, or abraded threads at terminations.
- Energy absorber (where fitted): deployment or torn cover.
- Markings: labels must be present and legible.
Retire the equipment immediately after any fall arrest event or if any inspection point fails. Destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Frontline LPO62RADJ Submittals and Documentation
Frontline LPO62RADJ Spec Sheet (PDF)Ratings, hardware, proof loads, and standards. Frontline LPO62ADJ User Manual (PDF)Use, limitations, tie-back rigging, inspection, and retirement. Frontline LPO62RADJ Test Report (PDF)Third-party test results to ANSI Z359.3. Frontline Catalog (PDF)The full Frontline Fall Protection product catalog.Compatible and Related Products
- Frontline LPO62SADJ Tie-Back Twin Leg Snaphook Lanyard. The snaphook version of the same tie-back twin.
- Frontline LIS62R Twin Leg Rebar Lanyard. The standard (non-tie-back) twin rebar lanyard.
- Frontline 100CTB Combat Construction Harness. The construction harness to complete the system.
Working Anchor-Poor Structures?
Tie-back lanyards turn the structure into the anchor. Confirm your application, anchorage, and clearance with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
