Frontline RPA062RA Aramid Twin Fiber Web 6 ft SRL with Aluminum Rebar Hook Ends

(No reviews yet) Write a Review
$436.99
Brand:
Frontline Fall Protection
SKU:
RPA062RA
Availability:
Usually ships within 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Frontline Web SRLs

RPA062RA Aramid Twin Fiber Web 6 ft SRL with Aluminum Rebar Hook Ends

The Frontline RPA062RA is a compact, lightweight twin leg aramid-web self-retracting lifeline: a 6 ft UHMWPE and polyester webbing lifeline in a small thermoplastic housing that hangs close to the body and locks in inches if a fall starts.

Stainless steel and non-corrosive components run throughout, the connector strength is 3,600 lbs, and the device carries a 310 lb max capacity and a 42 in maximum arrest distance. Built to ANSI Z359.14, aligning with OSHA 1926 Subpart M and 1910.

Frontline RPA062RA
3,600 lbsConnector Strength
310 lbsMax Capacity
6 ftLifeline Length
AramidUHMWPE + Polyester Web
CompactThermoplastic Housing
100%Fall Protection
StainlessNon-Corrosive Parts
Z359.14ANSI Standard

Who Needs This Product

This product is a self-retracting lifeline (SRL) - a fall arrest connecting device that pays out and retracts automatically, locking in inches if a fall starts. Steel erectors, deck crews, and maintenance workers clip in for hands-free protection with minimal fall distance. You still need a full body harness and a rated anchor to complete the system.

Features

Compact and light

The aramid web and small thermoplastic housing keep weight and bulk off the harness.

Aramid webbing lifeline

High-strength UHMWPE and polyester web retracts and locks in a fall.

Stainless internals

Non-corrosive components for long service life.

100 percent fall protection

Continuous hands-free protection from a single compact device.

Twin leg, 100 percent tie-off

Two lifelines leapfrog anchor to anchor.

42 in arrest

Fast lockup per the spec sheet.

Technical Specifications

SKURPA062RA
TypeAramid web twin leg SRL, 6 ft
LifelineUHMWPE and polyester aramid webbing
HousingCompact thermoplastic; stainless and non-corrosive components
Connector strength3,600 lbs
Max arrest distance42 in
Max capacity310 lbs (one worker)
StandardsANSI Z359.14; OSHA 1926 Subpart M; OSHA 1910

Mind the anchor height and the edge. Standard SRLs are rated for overhead anchorage; foot-level or leading-edge use requires an LE-rated device. Confirm anchor placement, swing-fall, and clearance below the work surface before each use - run the Fall Protection Calculator below, and rig per the Frontline manual.

Compliance Standards

ANSI Z359.14

American National Standard for self-retracting devices. Third-party test report linked in Submittals.

OSHA 29 CFR 1926 Subpart M

Federal construction fall protection requirements.

OSHA 29 CFR 1910

General industry personal fall protection requirements.

Typical Applications

Steel erectionCompact overhead protection on the iron.
Rebar and formworkLight SRL for congested work.
Tower and structureMinimal-bulk vertical protection.
Confined spaceSmall housing for tight entries.
MaintenanceEveryday compact fall arrest.
IndustrialGeneral-industry tie-off under 1910.

How to Use the RPA062RA

Follow the manufacturer's manual. The sequence below is an overview only.

  1. Inspect. Check the aramid webbing, braking, housing, and hooks before each use.
  2. Mount to the harness. Attach both housings to the harness per the manual.
  3. Connect to the harness. Attach to the dorsal D-ring.
  4. Check the gates. Confirm every hook is closed and locked.
  5. Verify clearance. Confirm fall clearance and swing-fall below - run the calculator below.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least every 6 months. Pull the equipment from service for any of the conditions below.

  • Lifeline webbing/cable: cuts, fraying, abrasion, burns, or chemical damage.
  • Braking: lifeline must lock sharply on a quick pull test.
  • Housing: cracks, loose fasteners, or damaged lifeline exit.
  • Energy absorber: deployment or torn cover.
  • Hooks and swivels: deformation, corrosion, gates that fail to lock.

Retire the equipment immediately after any fall arrest event or if any inspection point fails. Destroy retired equipment so it cannot return to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC
Free Tool · No Signup · OSHA 1926.502
Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Frequently Asked Questions

How big is the RPA062RA?
Compact - a small thermoplastic housing with a 6 ft aramid web lifeline, built to stay light on the harness.
What is the webbing?
High-strength UHMWPE and polyester aramid webbing - strong and abrasion-resistant at low weight.
What is the rated capacity?
One worker up to 310 lbs; 3,600 lb connector strength.
Is it leading-edge rated?
No - this is a standard overhead-anchorage aramid SRL. For foot-level or sharp-edge tie-off use a leading-edge rated device.
What is the arrest distance?
42 in maximum per the spec sheet.
Has it been independently tested?
Yes - the RPA062RA test report is linked in Submittals.
What is the difference between fall arrest and fall restraint?
Fall arrest catches a worker after a fall happens; fall restraint prevents the worker from reaching the fall hazard in the first place. For a deeper walkthrough with system examples, read our guide: Fall Arrest vs. Fall Restraint. Use the Fall Protection Calculator below to size the right system for your job.

Specifying Personal SRLs for Your Crew?

SRLs, harnesses, and anchors have to match the work height and edge. Confirm your application, anchorage, and clearance with us and we will walk through the kit list so the right equipment ships together.

Call 863-703-4522 to talk to a fall protection specialist.

Frontline warrants its products against manufacturing defects in workmanship and materials, as well as product recalls, for a period of one (1) year from the date of purchase. This warranty excludes normal wear and tear, misuse, and improper installation. The limited warranty is provided only to an end-user customer for the period set forth in an order accepted by Fall Protection Distributors, LLC.

About Frontline Fall Protection