Polyurethane-Coated Harness, Red, 5-Point, Grommet Legs
The Guardian H77352 seals the harness against the site: red polyurethane-coated webbing that sheds concrete slurry, mud, paint, and grime that saturate standard webbing, with a quick-connect chest and grommet leg buckles. Wipe it down at the end of the shift and inspect clean webbing instead of caked fiber.
Certified to ANSI Z359.11 and compliant with OSHA 1910.140 and 1926.502 at the capacities in the manual.
Guardian Harness Sizing Chart
Height (ft) by Weight (lb)
Blocks overlap by design: in an overlap, either size fits. Approximate bands: Small 100 to 160 lb and 5 ft to 6 ft. M-L 130 to 240 lb and 5 ft to 6 ft 2 in. XL 180 to 300 lb and 5 ft 2 in to 6 ft 4 in. 2XL 240 to 360 lb and 5 ft 4 in to 6 ft 6 in. 3XL 300 to 420 lb and 5 ft 6 in to 6 ft 8 in. Guardian harnesses sold as Universal or S-L span the Small and M-L bands, and XL-XXL spans the XL and 2XL bands. Based on the manufacturer's published Guardian sizing chart; verify fit per the instruction manual before first use.
Who Needs This Product
Concrete, drilling, and coating crews destroy standard harnesses from the outside in: contamination works into the fibers and hides the damage inspection looks for. The poly coating keeps the mess on the surface where a wipe removes it, and the red color makes contamination visible immediately.
Features
Built for harsh industrial environments
Durable harness construction designed to perform in demanding industrial applications where cleanliness and long-term wear resistance matter.
Durable, easy-to-clean webbing
Polyurethane-coated webbing provides added resistance to wear and contamination while allowing for fast and easy cleaning.
Faster harness fit-up
Quick-connect chest and tongue buckle leg straps help simplify donning and removal.
Quick and efficient adjustment
5 points of adjustment and spring-loaded torso adjusters allow for faster and simplified harness fitment.
Convenient connector management
Dual lanyard keepers securely stow unused connector legs and keep equipment out of the way during work.
Jobsite-grade construction
Built with the materials and finish quality Guardian applies across its height safety line.
Technical Specifications
| SKU | H77352 |
|---|---|
| Product weight | 4 lbs |
| Dimensions | 6 in L x 12 in W x 0 in H |
| Standards | ANSI Z359.11,OSHA 1910.140, OSHA 1926.502 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Fit before the first step up. Adjust the harness so the dorsal D-ring sits between the shoulder blades, the chest strap crosses mid-chest, and leg straps allow a flat hand but not a fist. Retire any harness that has arrested a fall.
Compliance Standards
ANSI Z359.11
This product is compliant with ANSI Z359.11 when used as part of a complete, competent-person verified system.
OSHA 1910.140
This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.
OSHA 1926.502
This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.
ISO 17025 lab tested
Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.
Typical Applications
Donning Overview
Donning must follow the Guardian instruction manual for this harness. The sequence below is an overview only.
- Inspect first. Check webbing, stitching, D-rings, and buckles before every use.
- Shake out and orient. Hold by the dorsal D-ring; straps fall into place without twists.
- Arms through. Put the harness on like a jacket, shoulder straps over both shoulders.
- Buckle the chest. Connect the chest buckle at mid-chest height.
- Buckle the legs. Connect each leg strap; snug so a flat hand fits but a fist does not.
- Adjust and check. Set all adjustment points and confirm the dorsal D-ring sits between the shoulder blades.
Inspection and Retirement
Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the harness from service for any of the conditions below.
- Webbing: cuts, fraying, abrasion, burns, or chemical damage.
- Stitching: broken, pulled, or abraded threads at load-bearing junctions.
- Hardware: cracks, corrosion, or deformation of D-rings and buckles.
- Impact indicators: any deployment (models so equipped).
- Labels: missing or illegible.
Retirement triggers: any fall arrest event, a deployed impact indicator, or any condition where the inspector cannot positively verify the harness is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian H77352 Poly-Coated Harness, Red, QC Chest Submittals and Documentation
Guardian Polyurethane Coated Harness Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Guardian Polyurethane Coated Harness Tds (PDF)Dimensions, materials, capacities, and the full compliance summary.Guardian Polyurethane Coated Harness Test Report (PDF)ISO 17025 accredited laboratory test results.Guardian Polyurethane Coated Harness Doc Of Conformity (PDF)Manufacturer declaration of conformity.Guardian Construction Tux Harness Inspection Form (PDF)Printable competent-person inspection checklist.Compatible and Related Products
- Guardian Series 3 Harness. The padded general construction line.
- Guardian 10733 Suspension Trauma Strap 4-Pack. Post-fall relief for every harness.
- Guardian CR5 Class 1 Web SRL. Personal SRL to pair with these harnesses.
Outfitting a Crew with Harnesses?
Sizing, buckle styles, and duty level decide the right model. Confirm your crew with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
