Safety Glasses
The Malta Dynamics Safety Glasses are a lightweight, rimless safety glass built for all-day comfort and bulk crew outfitting. The rimless, ergonomic frame and molded nose bridge give a universal fit that feels secure without pressure points, and thin, flexible temples keep them stable on a construction site, in a warehouse, or working outdoors.
Both the Clear and Tinted lenses meet the ANSI Z87.1+ high-impact standard, and the tinted lens adds 99 percent UV protection to cut glare in bright light. The lenses carry an anti-scratch coating and wipe clean with soap and water. Sold by the case in 144-pair and 300-pair quantities, they are a cost-effective way to outfit crews, safety programs, and large worksites.
Who Needs This Product
The Malta Dynamics Safety Glasses are economical primary eye protection for outfitting whole crews, safety programs, and large worksites. The rimless, lightweight design and universal molded nose bridge keep them comfortable for all-day wear in construction, warehousing, and outdoor work, which helps keep workers in their PPE. Each worker wears one pair as part of a complete jobsite program, and the 144-pair and 300-pair cases make restocking a high-turnover eyewear program simple.
Features
Rimless lightweight design
A rimless, ergonomic frame keeps weight down to about 0.96 ounces for comfortable all-day wear.
Universal molded fit
A molded nose bridge and thin, flexible temples fit most head shapes without pressure points.
Z87.1+ impact rated
Both lenses meet the ANSI Z87.1+ standard for high-impact eye protection.
UV protection
The tinted lens shields against bright light and glare with 99 percent UV protection.
Anti-scratch lenses
Anti-scratch coated lenses hold up to repeated daily handling on the jobsite.
Bulk case quantities
Sold in 144-pair and 300-pair cases, an economical way to outfit and restock a crew.
Technical Specifications
| Part numbers | SG1012 (Clear), SG1112 (Tinted) |
|---|---|
| Type | Rimless safety glasses, primary eye protection |
| Lens material | Polycarbonate |
| Frame | Rimless, ergonomic with molded nose bridge and flexible temples |
| Lens options | Clear or Tinted |
| Coating | Anti-scratch |
| UV protection | 99 percent (SG1112 tinted lens only) |
| Weight | Approximately 0.96 ounces per pair |
| Pack sizes | 144-pair case or 300-pair case per lens color |
| Impact rating | High impact (ANSI Z87.1+) |
| Compliance | ANSI Z87.1+ (SG1112 Declaration of Conformity cites ANSI/ISEA Z87.1-2015) |
| Warranty | 1 year limited (Malta Dynamics) against factory defects in workmanship and materials |
Eye protection is task specific. Confirm the lens tint suits your light conditions and that ANSI Z87.1+ glasses are rated for your hazard. Replace any pair with scratched, pitted, or cracked lenses, inspect before each use, and pair eye protection with the head, hand, hearing, and fall protection your jobsite requires.
Compliance Standards
ANSI Z87.1+
American National Standard for occupational eye and face protection, high-impact (plus) rated.
ISO 17025 Test Lab
Conformity verified by an independent third-party lab accredited to ISO 17025.
OSHA 29 CFR 1926.102
OSHA construction eye and face protection requirement these glasses are designed to satisfy.
OSHA 29 CFR 1910.133
OSHA general industry eye and face protection requirement for the same hazards.
Typical Applications
Selection and Use Overview
Use per the Malta Dynamics product instructions. The sequence below is an overview only.
- Match the lens. Clear (SG1012) for indoor or low-light work, Tinted (SG1112) for bright outdoor glare and UV.
- Confirm the rating. Verify ANSI Z87.1+ high-impact protection meets your task hazard assessment.
- Fit the bridge. Seat the molded nose bridge and set the flexible temples for a secure, pressure-free fit.
- Layer with PPE. Keep the glasses clear of a hard hat, hearing protection, and face shields.
- Inspect before use. Check the lens for scratches, pitting, or cracks and replace damaged pairs.
- Clean and store. Wipe lenses with soap and water and store away from abrasive surfaces.
Inspection and Replacement
Inspect each pair before use. Remove eye protection from service for any of the conditions below.
- Lens: scratches, pitting, crazing, or cracks that obscure vision or weaken impact protection.
- Frame: cracks or broken temples that let the glasses shift or fall.
- Nose bridge: damage or deformation that breaks the universal fit.
- Coating: a degraded anti-scratch coating that hazes vision.
- Markings: the Z87 and manufacturer markings must remain legible.
Replace eye protection after any direct impact event, when the lens can no longer be cleaned to clear vision, or when the frame loses its fit. Safety eyewear is not repaired in the field.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Malta Dynamics Safety Glasses Submittals and Documentation
Spec Sheet (PDF)Key features, lens options, weight, and compliance summary for SG1012 and SG1112. Declaration of Conformity (PDF)ANSI/ISEA Z87.1 conformity statement with independent ISO 17025 test verification for SG1112.Compatible and Related Products
- Malta Dynamics APEX Safety Glasses. A step-up glass with curved lenses, anti-fog coating, and a wear-over-Rx fit.
- Malta Dynamics APEX Foam Lined Safety Glasses. A sealed glass with a foam gasket for dustier work.
- Malta Dynamics APEX Safety Goggles. A full goggle with a dual rubber seal for the heaviest dust and splash.
- Malta Dynamics APEX Hard Hat. Head protection to pair with your eye protection on the jobsite.
Specifying Eye Protection for Your Crew?
Need to outfit a crew or safety program with economical Z87.1 eyewear? Confirm your lens mix and case quantities with us and we will walk through the full PPE list so the right gear ships together.
Call 863-703-4522 to talk to a safety equipment specialist.
