APEX Safety Goggles
The Malta Dynamics APEX Safety Goggles are sealed eye protection engineered for the most demanding environments. A dual injected rubber seal creates a comfortable barrier against dust, debris, and airborne hazards, while the streamlined profile pairs seamlessly with hard hats and helmets. An adjustable head strap and quick-release clip make it easy to put the goggles on and take them off without slowing down.
An anti-fog lens coating and an integrated ventilation channel keep vision clear in hot, humid, or fast-changing conditions. Tested to the ANSI/ISEA Z87.1-2020 standard, the APEX Safety Goggles come with clear or tinted polycarbonate lenses in a convenient 12-pair pack for dependable, professional-grade protection on every jobsite.
Who Needs This Product
The APEX Safety Goggles are sealed primary eye protection for workers facing heavy dust, flying debris, or airborne hazards that an open safety glass cannot block. The dual injected rubber seal and adjustable strap suit demolition, grinding, masonry, and chemical-handling tasks, and the low profile is built to be worn under a hard hat or helmet. Each worker wears one pair as part of a complete jobsite PPE program, and the 12-pair pack makes it easy to stock a crew.
Features
Dual injected rubber seal
A dual injected rubber seal forms a comfortable barrier that blocks dust, debris, and airborne hazards.
Anti-fog coating
An anti-fog lens coating maintains visibility in hot, humid, or fast-changing conditions.
Ventilation channel
An integrated ventilation channel reduces fogging while keeping particles out.
Adjustable head strap
An adjustable head strap with a quick-release clip gives a secure, custom fit and fast on and off.
Hard hat compatible
The streamlined profile and strap clip pair seamlessly with hard hats and helmets.
Clear or tinted lenses
Polycarbonate lenses come clear for indoor work or tinted with 99.9 percent UV for bright sun.
Technical Specifications
| Part numbers | SG1300 (Clear), SG1310 (Tinted) |
|---|---|
| Type | Sealed safety goggles, primary eye protection |
| Lens material | Polycarbonate |
| Frame material | Plastic and TPR with a dual-injected rubber seal |
| Lens options | Clear or Tinted |
| Coating | Anti-fog |
| UV protection | 99.9 percent (tinted lens only) |
| Seal | Dual-injected rubber seal against dust, debris, and airborne hazards |
| Ventilation | Integrated ventilation channel to reduce fogging |
| Strap | Adjustable head strap with quick-release clip; hard hat and helmet compatible |
| Weight | Less than 1 lb per pair |
| Pack sizes | 12-pair pack per lens color |
| Compliance | ANSI/ISEA Z87.1-2020 |
| Warranty | 1 year limited (Malta Dynamics) against factory defects in workmanship and materials |
Eye protection is task specific. Confirm that the lens tint suits your lighting conditions and that ANSI/ISEA Z87.1-rated goggles are appropriate for your hazard. Replace any pair with scratched, pitted, or cracked lenses, or a failed seal. Inspect before each use, and pair eye protection with the head, hand, hearing, and fall protection your jobsite requires.
Compliance Standards
ANSI/ISEA Z87.1-2020
American National Standard for occupational personal eye and face protection, sealed goggle.
ISO 17025 Test Lab
Z87.1 conformity verified by ICS Laboratories, an independent third-party lab accredited to ISO 17025.
OSHA 29 CFR 1926.102
OSHA construction eye and face protection requirements are satisfied by these goggles.
OSHA 29 CFR 1910.133
OSHA general industry eye and face protection requirements for the same hazards.
Typical Applications
Selection and Use Overview
Use per the Malta Dynamics product instructions. The sequence below is an overview only.
- Match the lens. Clear (SG1300) for indoor or low-light, Tinted (SG1310) for bright outdoor glare and UV.
- Confirm the rating. Verify that ANSI/ISEA Z87.1-2020 protection meets your task and hazard assessment.
- Seat the seal. Position the dual rubber seal against the face so it seals fully around the eyes.
- Adjust the strap. Set the head strap with the quick-release clip for a secure fit, and wear it under a hard hat if needed.
- Inspect before use. Check the lens, seal, and strap for scratches, cracks, or wear, and replace damaged parts.
- Clean and store. Clean lenses with mild soap and water and store them away from abrasive surfaces.
Inspection and Replacement
Inspect each pair before use. Remove eye protection from service for any of the conditions below.
- Lens: scratches, pitting, crazing, or cracks that obscure vision or weaken impact protection.
- Seal: torn, hardened, or deformed rubber that no longer seals to the face.
- Strap and clip: a stretched, frayed, or broken strap or a failed quick-release clip.
- Ventilation: a blocked or damaged ventilation channel that increases fogging.
- Markings: the Z87 and manufacturer markings must remain legible.
Replace eye protection after any direct impact event, when the lens can no longer be cleaned to clear vision, or when the rubber seal or strap fails. Safety goggles are not repaired in the field.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Malta Dynamics APEX Safety Goggles Submittals and Documentation
Spec Sheet (PDF)Features, materials, lens options, seal, ventilation, and compliance summary for SG1300 and SG1310. Declaration of Conformity (PDF)ANSI/ISEA Z87.1-2020 conformity statement with ICS Laboratories ISO 17025 third-party test reference.Compatible and Related Products
- Malta Dynamics APEX Foam Lined Safety Glasses. A lighter foam-sealed glass when a full goggle is more than you need.
- Malta Dynamics APEX Safety Glasses. The open-frame APEX glass for general impact protection.
- Malta Dynamics APEX Hard Hat. Head protection that pairs with the goggle strap on the jobsite.
- Malta Dynamics A5 Work Gloves. Hand protection to round out your jobsite PPE program.
Specifying Eye Protection for Your Crew?
Need sealed eye protection matched to heavy dust or splash hazards? Confirm your conditions and lens choice with us and we will walk through the full PPE list so the right gear ships together.
Call 863-703-4522 to talk to a safety equipment specialist.
