6 ft Wild Boar Single-Leg Personal SRL, Class 1-P
The Malta Dynamics 6 ft Wild Boar Single-Leg Personal SRL is a compact, palm-sized self-retracting lifeline built for short-range tie-off where mobility matters as much as protection. An impact-resistant polymer housing and a high-strength UHMWPE and polyester lifeline keep the unit light without giving up jobsite durability, and a 360-degree swivel top lets the worker move freely without twisting the line.
Rated as a Class 1-P device for anchorage at or above the dorsal D-ring, each unit supports a single worker from 130 to 310 lb with a maximum arresting force of 1,800 lbf, an average arresting force of 1,350 lbf, and a maximum arresting distance of 42 inches. Choose a standard snap hook (C4102) or a wide-gate rebar hook (C4103). Need 100 percent tie-off while moving between anchor points? See the twin-leg Wild Boar Personal SRL. Tested to ANSI Z359.14-2021 and OSHA standards.
Who Needs This Product
The Wild Boar Single-Leg Personal SRL is the connecting device in a personal fall arrest system - the link between a worker's dorsal D-ring and an overhead anchorage at or above that D-ring. It suits compact, highly active work zones where a full-length lanyard would create excess slack and snag hazards. Each worker still needs an ANSI full body harness and a compatible overhead anchorage. This single-leg unit protects one worker on one anchor point; if your crew needs to stay attached while transferring between anchor points, choose the twin-leg version for 100 percent tie-off.
Features
Palm-sized personal SRL
A compact Class 1-P unit that fits in the palm of your hand, ideal for tight, elevated, and confined work areas where bulk gets in the way.
360-degree swivel top
A swivel anchorage top lets the worker move and turn freely while the lifeline pays out and retracts without twisting.
UHMWPE and polyester lifeline
A high-strength UHMWPE and polyester web lifeline delivers long-lasting performance and smooth, controlled retraction with minimal weight.
Two hook options
Choose a standard steel snap hook for everyday anchorage or a wide-gate rebar hook for larger anchor points such as rebar and scaffolding.
Lightweight build
At 2.7 lb with a snap hook or 2.9 lb with a rebar hook, the single-leg unit is light enough to wear all shift without adding fatigue.
External shock pack
An external shock pack with a protective cover dissipates arresting force, and an impact-resistant polymer housing stands up to heavy jobsite use.
Technical Specifications
| SKUs | C4102 (6 ft snap hook), C4103 (6 ft rebar hook) |
|---|---|
| Type | Class 1-P personal self-retracting lifeline, for anchorage at or above the dorsal D-ring |
| Lifeline length | 6 ft |
| Worker capacity | 130 to 310 lb per user, including tools and equipment |
| Maximum arresting force | 1,800 lbf |
| Average arresting force | 1,350 lbf |
| Maximum arresting distance | 42 in |
| Lifeline material | UHMWPE with polyester |
| Hook material | Alloy steel (snap hook or wide-gate rebar hook) |
| Housing | High-impact-resistant polymer with 360-degree swivel top and external shock pack |
| Weights | C4102 2.7 lb; C4103 2.9 lb |
| Compliance | ANSI/ASSP Z359.14-2021; OSHA 1926 Subpart M; OSHA 1910; OSHA 1926.502; OSHA 1910.66 |
| Warranty | 1 year limited (Malta Dynamics) against factory defects in workmanship and materials |
For overhead use only. The Wild Boar Personal SRL is a Class 1-P device rated for anchorage at or above the dorsal D-ring. Confirm your anchorage meets the strength requirement, calculate fall clearance and swing-fall clearance before each use, and never use a damaged unit or one that has arrested a fall. Each worker also needs an ANSI full body harness.
Compliance Standards
ANSI/ASSP Z359.14-2021
The current ANSI standard for self-retracting devices. The Wild Boar Personal SRL is tested as a Class 1-P (personal) device.
OSHA 29 CFR 1926 Subpart M
Construction fall protection, including personal fall arrest system requirements under 1926.502.
OSHA 29 CFR 1926.502
Fall protection systems criteria and practices for construction work.
OSHA 29 CFR 1910 / 1910.66
General industry personal fall arrest requirements covering anchorage and connecting devices.
Typical Applications
Use Overview
Use per the Malta Dynamics self-retracting lifeline instruction manual. The sequence below is an overview only.
- Inspect. Check the housing, lifeline, swivel, hook gate, and shock pack before each use, and confirm the load indicator has not deployed.
- Anchor overhead. Connect the swivel top to an anchorage at or above the dorsal D-ring that meets the system strength requirement.
- Don the harness. Put on an ANSI full body harness and confirm a snug fit.
- Connect. Clip the SRL snap hook or rebar hook to the dorsal D-ring.
- Verify clearance. Calculate required fall clearance and swing-fall clearance below the work surface before starting work.
- Work. Let the lifeline extend and retract smoothly as you move within range of the anchor point.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least every six months (or more often per your program). Remove the SRL from service for any of the conditions below.
- Housing: cracks, deformation, or impact damage.
- Lifeline: cuts, frays, burns, chemical damage, or pulled stitches.
- Retraction: line that does not retract smoothly or fails to lock when pulled sharply.
- Hook and swivel: bent gate, weak gate spring, corrosion, or a swivel that binds.
- Shock pack and indicator: any sign the energy absorber or load indicator has deployed.
- Labels: must remain legible and intact.
Retirement triggers: any fall-arrest event, a deployed shock pack or load indicator, or any cut, burn, or housing crack. Remove the unit from service immediately and tag it so it cannot be reused.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Malta Dynamics Wild Boar Personal SRL Submittals and Documentation
Wild Boar Personal SRL Spec Sheet (PDF)Performance specs, materials, weights by part number, and compliance summary. SRL User Instruction Manual (PDF)Use, fall clearance and swing falls, inspection, and the inspection log. C4102 Declaration of Conformity (PDF)Conformity statement for the snap-hook configuration. C4103 Declaration of Conformity (PDF)Conformity statement for the rebar-hook configuration.Compatible and Related Products
- Malta Dynamics Wild Boar Twin-Leg Personal SRL. The twin-leg version with an included C1004 dual connector for 100 percent tie-off.
- Malta Warthog Tongue and Buckle Harness. An ANSI full body harness to complete the personal fall arrest system.
- Malta C7002-G2 Warthog 50 ft SRL. A longer-range Class 1 cable SRL for fixed overhead anchorage.
- Malta A6304 4-Way Anchor Plate. A reusable roof anchorage to tie off the SRL on metal, wood, or concrete.
Specifying SRLs for Your Crew?
Need help matching the right self-retracting lifeline, harness, and anchorage to your jobsite? Confirm your anchorage height, fall clearance, and tie-off plan with us and we will walk through the full kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
