Titan ReadyWorker Fall Protection Kit
One SKU, one outfitted worker: the Miller ReadyWorker kit packs a Titan full body harness with back D-ring and tongue leg buckles, a 6 ft tubular shock absorbing lanyard, and a waterproof storage bucket that keeps the gear clean between jobs. Universal harness sizing fits the majority of workers straight out of the bucket.
For contractors who need compliant fall arrest on a new hire, a visitor, or a one-off task, the kit answers the whole question at once: body wear, connecting device, and storage, ready to hand across the tailgate.
Who Needs This Product
Kits solve a purchasing problem more than an equipment problem: a small contractor or a super with a new sub on site needs a worker compliant in one order, not a three-SKU shopping trip. The ReadyWorker covers the harness and lanyard halves of the ABC (anchor, body wear, connector) and the bucket keeps the kit together in the truck. Add a compliant anchor for the task and the system is complete.
Features
Titan Full Body Harness
Back D-ring, back strap with pull-free lanyard rings, tongue leg buckles, and universal sizing.
6 ft Tubular Shock Lanyard
The tubular shock absorbing lanyard limits arrest forces on anchor points at or above the D-ring.
Waterproof Bucket
The sealing bucket stores the kit clean and dry between jobs and doubles as the site kit marker.
Pull-Free Lanyard Rings
Parking rings on the back strap stow the lanyard leg without loading the fall arrest system.
One-Order Compliance
Body wear plus connector in one SKU; add a task-appropriate anchor to complete the system.
Universal Sizing
The Universal harness fits the majority of workers without a sizing conversation.
Technical Specifications
| SKU | TFPK-2/U/6FTAK |
|---|---|
| Product | Titan ReadyWorker Fall Protection Kit |
| Harness | Titan full body, back D-ring, tongue leg buckles, universal size |
| Lanyard | 6 ft tubular shock absorbing |
| Storage | Waterproof bucket |
| Country of origin | United States |
| Standards | Components meet OSHA 1926.502 and applicable ANSI standards |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
The kit is two-thirds of a system. Fall arrest needs an anchor, body wear, and a connector. The ReadyWorker covers body wear and connector; anchor to a point rated for fall arrest and verify clearance below the work level for the 6 ft lanyard plus deceleration distance.
Compliance Standards
OSHA 1926.502 and 1910.140
Meets OSHA requirements for personal fall arrest system body wear in both construction and general industry.
ANSI Z359.11
Certified to the ANSI/ASSE Z359.11 standard for full body harnesses, covering design, testing, and marking requirements.
Complete System Requirement
OSHA 1926.502 requires a complete personal fall arrest system; pair the kit with a compliant anchorage for the task.
Typical Applications
Setup Overview
- Open the bucket and inspect the harness and lanyard before first use.
- Don the Titan harness and adjust all points, dorsal D-ring between the shoulder blades.
- Anchor the lanyard to a point rated for fall arrest at or above the D-ring where possible.
- Connect the lanyard snap hook to the dorsal D-ring and verify both gates lock.
- Verify fall clearance below the work level, then return gear to the bucket after the shift.
Component instructions ship in the kit; the harness manual is also linked below.
Inspection and Retirement
Inspect this harness before each use, and have a competent person other than the user formally inspect it at least annually per ANSI Z359.2. Check each point below and record the results on the inspection form linked in the documentation section.
- Webbing: cuts, frays, burns, chemical damage, UV fading, or broken stitching anywhere on the harness.
- Hardware: D-rings and buckles for cracks, corrosion, distortion, or sharp edges.
- Adjusters and keepers: slippage, missing keepers, or strap ends that will not stay stowed.
- Labels: present and legible, including the size, standards, and serial information.
Retirement triggers: any fall arrest event, any webbing or hardware defect found during inspection, or any condition where the inspector cannot positively verify the harness is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller TFPK-2 ReadyWorker Kit Submittals and Documentation
TFPK-2 Specification Sheet (PDF)Technical data, materials, and SKU-level UPC information. User Instruction Manual I119 (PDF)Miller I119 manual covering harnesses and body belts: use limitations and inspection criteria. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. Inspection Form (PDF)Printable pass/fail checklist for documented inspections.Compatible and Related Products
- Miller T4500 Titan II Non-Stretch Harness. Step up to the hi-viz Titan II harness.
- FallTech ElasTech Shock Absorbing Lanyard, 6 ft. A spare or replacement shock absorbing lanyard.
- Guardian 10733 Suspension Trauma Strap, 4-Pack. Add trauma relief to the kit harness.
Outfitting Workers by the Kit?
Kits, sized harnesses, and anchors each have their place. Confirm your crew with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
