TurboLite+ Edge Single Cable PFL, Aluminum captive eye carabiner
The TurboLite+ Edge is the Class 2 member of the PLUS family: a galvanized steel cable lifeline with an integral energy absorber, rated for foot-level tie-off and arrest over a leading edge, where a webbing device is out of its depth. The aluminum one-pin connector mounts the unit flat on the dorsal D-ring.
Certified to ANSI Z359.14-2021 Class 2, CSA SRL-LE listed in the 6 ft length, and rated to 420 lb per OSHA. This MTL-LEP1-63 configuration carries a aluminum captive eye carabiner on the lifeline end.
Who Needs This Product
The Edge single is for deck, slab, and formwork crews whose anchor is at their feet and whose lifeline can meet an edge in a fall. This configuration (captive eye carabiner keeps the connector oriented) matches the hook to the anchor hardware.
Features
Class 2 Edge Rating
Certified for foot-level tie-off and arrest over a leading edge under ANSI Z359.14-2021, the load cases that destroy web devices.
Galvanized Cable Lifeline
Steel cable takes edge contact and abrasion that would saw through webbing.
Integral Energy Absorber
The inline absorber manages the higher forces of foot-level arrest, keeping loads on the worker survivable.
Aluminum captive eye carabiner
The lifeline end carries a aluminum captive eye carabiner, matched to the anchors your crew actually uses.
Aluminum One-Pin Mount
The harness connector pins the unit flat to the dorsal D-ring with no carabiner stack.
Visual Load Indicator
A deployed indicator means the unit has arrested a fall and comes out of service.
Technical Specifications
| SKU | MTL-LEP1-63 family |
|---|---|
| Product | TurboLite+ Edge Single Cable Personal Fall Limiter |
| Working length | 6 ft and 9 ft |
| Lifeline | Galvanized steel cable with integral energy absorber |
| Harness mount | Aluminum one-pin dorsal connector |
| Lifeline connector | Aluminum captive eye carabiner |
| Tie-off | Overhead through foot-level; leading edge rated |
| Capacity | 420 lb per OSHA including all clothing, tools, and equipment |
| Packaging | Boxed |
| Country of origin | Mexico |
| Standards | ANSI Z359.14-2021 Class 2; CSA SRL-LE (6 ft); OSHA 1926.502; OSHA 1910.140 |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
Sizes and Ordering Information
| Length | SKU | UPC |
|---|---|---|
| 6 ft | MTL-LEP1-63/6FT | 612230301064 |
| 9 ft | MTL-LEP1-63/9FT | 612230301071 |
Both stocked lengths are selectable from the options above.
Foot-level tie-off demands more clearance. Class 2 arrest from a foot-level anchor produces longer free fall and deeper deceleration than overhead tie-off. Run the clearance numbers for the foot-level case before the first connection, and check the load indicator before every use.
Compliance Standards
ANSI Z359.14-2021 Class 2
Certified as a Class 2 self-retracting device: rated for foot-level tie-off and exposure over a leading edge, the rating Class 1 devices do not carry.
CSA Class SRL-LE
The 6 ft length is listed by the manufacturer as CSA Class SRL-LE for leading edge use on Canadian jobsites.
OSHA 1926.502 and 1910.140
Meets OSHA connecting device requirements for personal fall arrest systems, rated to 420 lb per OSHA.
Leading Edge Tested
The galvanized cable lifeline and integral energy absorber are tested for arrest over an edge, where webbing devices fail.
Typical Applications
Setup Overview
- Inspect the housing, cable, energy absorber, load indicator, and connectors before use.
- Mount the unit to the dorsal D-ring with the aluminum one-pin connector.
- Connect the lifeline end to the anchorage and verify the gate locks.
- For foot-level tie-off, confirm the calculated clearance for Class 2 foot-level arrest.
- Keep the cable away from unguarded sharp edges not part of the work, and verify retraction before working.
Full use instructions and clearance tables ship with the unit.
Inspection and Retirement
Inspect the unit before each use, and have a competent person inspect it on a documented schedule per ANSI Z359.14 and the manual.
- Housing: cracks, distortion, loose fasteners, or a seized swivel.
- Cable: pay it out fully and check for kinks, birdcaging, broken wires, and corrosion.
- Energy absorber: no deployment, tearing, or exposed core.
- Load indicator: any deployment means immediate removal from service.
- Connectors: gates close and lock; the one-pin mount is tight and undamaged.
Retirement triggers: any fall arrest event, deployed load indicator or absorber, cable damage, or any failed inspection.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller MTL-LEP1-63 TurboLite+ Edge Submittals and Documentation
Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. MTL-LEP1-63 SRL Inspection Form (PDF)Printable pass/fail checklist for documented SRL inspections.Compatible and Related Products
- Miller TurboLite+ PFL, Carabiner and Snap Hook. The Class 1 web single for overhead anchors.
- Miller TurboLite+ Twin PFL, G2, Snap Hooks. The Class 1 web twin for overhead 100 percent tie-off.
- Miller T4500 Titan II Non-Stretch Harness. The harness the PFL rides on.
Working a Leading Edge?
Tie-off height, edge exposure, and clearance decide between Class 1 and Class 2 devices. Confirm your conditions with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
