Xenon Permanent Horizontal Lifeline Kit, Stainless Steel
The Xenon is the permanent horizontal that contractors install themselves: patented stainless steel components, straight-line kits with no certified installer requirement, and pass-through intermediate brackets the shuttle glides across without unclipping. The 60 ft kit covers a standard span; the shuttle (Xenon 1005709) is sold separately.
The 4-in-1 shock absorber serves as absorber, turnbuckle, tension indicator, and fall indicator, with a pop-out visual alert if the system has ever been loaded.
Who Needs This Product
Permanent HLLs turn recurring long-edge exposure into infrastructure: crane rail runways, loading docks, conveyors, rooftops, and pipe racks where the same traverse happens daily. The Xenon's fixed pass-through design has no moving gate parts to foul, which is why it thrives in dusty and corrosive plants, and the DIY installation removes the certified-installer line from the budget.
Features
Contractor DIY Installation
Straight-line kits install per the manual without a certified installer.
Pass-Through Intermediates
The shuttle glides across intermediate brackets without disconnecting: true hands-free traverse.
4-in-1 Absorber
Shock absorber, turnbuckle, tension indicator, and fall indicator in one component.
Pop-Out Load Alert
A visual indicator deploys if the system has taken an impact, flagging inspection.
Stainless Steel Longevity
Patented components built for outdoor and corrosive service with minimal upkeep.
Compact End Design
Shortened bracket distances improve safety at system entry and exit.
Technical Specifications
| SKU | X00060 |
|---|---|
| Product | Xenon Permanent Horizontal Lifeline Kit |
| Span | 60 ft straight-line kit |
| Construction | Patented stainless steel components |
| Absorber | 4-in-1: absorber, turnbuckle, tension and fall indicator |
| Shuttle | Xenon 1005709, sold separately |
| Standards | Meets OSHA horizontal lifeline requirements per the manual |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
The anchor is only as good as the structure. Connect only to members that meet OSHA anchorage strength, position to minimize free fall and swing, and inspect before every use.
Compliance Standards
OSHA 1926.502 Anchorage
Anchorages for fall arrest must support 5,000 lb per worker attached, or maintain a safety factor of two under a qualified person.
ANSI Z359 Practice
Anchorage connectors follow ANSI Z359 component practice with 5,000 lb rated hardware.
ANSI Z359.2
Kept in service through pre-use checks and documented competent person inspections at least annually.
Typical Applications
Setup Overview
- Inspect the anchor and hardware before use.
- Select structure that meets OSHA anchorage strength for fall arrest.
- Install the anchor per the instructions for the structure type.
- Connect the lanyard or SRL and verify gates lock.
- Verify fall clearance and swing fall exposure before working.
Full installation instructions ship with the product.
Inspection and Retirement
Inspect before each use and have a competent person inspect at least annually per ANSI Z359.2.
- Webbing or body: cuts, frays, corrosion, cracks, distortion, or damage.
- D-rings and hooks: no cracks, corrosion, distortion; gates lock where fitted.
- Stitching and fasteners: intact and tight.
- Labels: present and legible.
Retirement triggers: any fall arrest loading, any defect found during inspection, or failure to verify fitness for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller X00060 Submittals and Documentation
X00060 Specification Sheet (PDF)Technical data, ratings, and SKU-level UPC information. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. X00060 Anchor Inspection Form (PDF)Printable pass/fail checklist for documented anchor inspections.Compatible and Related Products
- Miller TechLine Temporary Horizontal Lifeline, 60 ft. The temporary rope answer for short-term spans.
- Miller TurboLite+ PFL, Carabiner and Snap Hook. The connecting device riding the shuttle.
- Miller T4500 Titan II Non-Stretch Harness. The harness completing the system.
Anchoring Your Fall Protection System?
Structure type, strength, and position decide the right anchor. Confirm your conditions with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
