Tie Down 48599 ladder standoff stabilizer for TranzPorter hoist track
Tie Down 48599 ladder standoff stabilizer for TranzPorter hoist track
Tie Down 48599 standoff mounting bracket detail
Tie Down 48599 standoff contact arm detail
Tie Down standoff stabilizer 48599 holding hoist track off a gutter
Tie Down TranzPorter track with standoff stabilizer 48599 at a roof eave
Tie Down 48599 standoff stabilizer features infographic
Tie Down 48599 standoff stabilizer dimensions infographic
Tie Down Engineering

Tie Down Ladder Standoff Stabilizer for TranzPorter Hoist Track

(No reviews yet) Write a Review
$103.99
Brand:
Tie Down Engineering
SKU:
48599
Availability:
Usually ships in 1 to 2 weeks
Shipping:
Calculated at Checkout
schema-description:
Tie Down 48599 roof hoist standoff stabilizer holds TranzPorter ladder hoist track off the gutter and fascia at the eave, protecting gutters, siding and paint on re-roof jobs. Pin-lock steel construction, 12 lb, made in the USA.
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
Tie Down Hoist Accessories

Tie Down Ladder Standoff Stabilizer for TranzPorter Hoist Track

The 48599 standoff stabilizer mounts near the top of the TranzPorter track and holds the rails off the gutter and fascia, so the hoist bears on the roof structure instead of crushing the gutter. It also widens the footprint at the top of the track for a steadier run.

It is built exclusively for the TP250 and TP400 and pin-locks directly to the hoist track in seconds. Keep it on the truck for every job with a gutter.

Tie Down 48599 ladder standoff stabilizer for TranzPorter hoist track
GutterProtects the Edge
33 inLength
12 lbWeight
SteelLightweight
TP250, TP400TranzPorter Fit
Pin-LockAttachment
WiderTop of Track Footprint
USAMade in Georgia
BuyRetail price shown aboveOrder online at the retail price shown above. Usually ships in 1 to 2 weeks. UPS Ground shipping is calculated at checkout. Pay by card, PayPal, ACH or purchase order for approved accounts.Add to Cart Above
Pay Over TimePayPal Pay Later at checkoutAdd it to your cart, choose PayPal at checkout and split the purchase into payments with Pay Later, subject to PayPal approval. No application before you order; the offer appears when you pay.Add to Cart and Pay Later

PayPal Pay Later availability and terms are set by PayPal at checkout. Ordering this with a machine or hoist kit? APPROVE business financing can cover the whole order; the sample payment is shown on that product page.

Who Needs This Product

Roofers running a TranzPorter on homes with gutters, and anyone who has replaced a crushed gutter after a hoist job. The standoff takes the load off the gutter and fascia and steadies the top of the track.

Features

Keeps the track off the gutter

Stands the rails off the gutter and fascia so the load bears on the roof structure.

Steadier top of track

Widens the contact at the eave for less side to side movement while the carriage runs.

Fits TP250 and TP400

Built exclusively for the TranzPorter hoists.

Steel construction

Strong, lightweight steel that stores compact.

Fast pin-lock install

Pins to the hoist track in seconds before the track is raised.

Made in the USA

Built by Tie Down in Georgia.

⚠

Install before raising the track. Mount the standoff to the track on the ground, then raise the assembly with two people and tie the top bracket to the roof. The standoff does not replace the roof tie or the brace required above 28 ft.

Compliance Standards

OSHA 29 CFR 1926.552

Material hoists; use only manufacturer parts and follow the Tie Down manual.

OSHA 29 CFR 1926.416

Keep hoist track 10 ft from overhead power lines.

Tie Down OEM part

Genuine Tie Down Engineering component for the TranzPorter and TranzVolt hoist lines.

Made in the USA

Built by Tie Down in Georgia; 90 day limited warranty (6 months on TranzVolt G2 equipment).

Typical Applications

Residential re-roofsHomes with gutters.
Fascia protectionFinished soffit and fascia.
Rental fleetsShip one with every hoist.
Siding crewsFinished exteriors.
Supply yardsDelivery hoists on customer homes.
CommercialMetal edge and coping.

How to Use

Follow the Tie Down instruction manual. The sequence below is an overview only.

  1. Lay the track out on the ground.
  2. Pin-lock the standoff to the track near the top.
  3. Raise the track with two people.
  4. Set the standoff against the roof above the gutter.
  5. Tie the top bracket to the roof before loading.

Inspection and Retirement

Inspect before each use, with a documented competent person inspection at least annually. Remove the system from service for any of the conditions below.

  • Frame: bends, cracks or corrosion.
  • Hardware: missing or loose bolts.
  • Contact surfaces: damage that would mar the roof.
  • Mounting brackets: deformation.
  • Finish: bare steel that will rust.

Remove the system from service immediately after any fall arrest event and have it inspected by a competent person before it returns to use.

Product Videos

TranzSporter platform lift hoist, full walkthrough video previewWatch: TranzSporter platform lift hoist, full walkthrough

Track setup at the eave.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

Part number48599 (Tie Down Engineering, USA)
TypeRoof hoist standoff stabilizer
Length33 in
Height15.5 in
Width3.75 in
Weight12 lb
ColorSilver and yellow
FitsTranzPorter TP250 and TP400 track
WarrantyTie Down 90 day limited warranty

Frequently Asked Questions

Does it fit the TranzVolt?
It is built for the TranzPorter track. Call us with your TranzVolt model before ordering.
How does it attach?
A pin-lock system fastens it directly to the hoist track; no tools.
Does it replace the roof tie?
No. Always tie the top bracket to the roof with the ladder and hoist anchor kit and rope.
Will it mar the roof?
It bears on the roof surface above the gutter; place it on a shingle course, not on the drip edge.
Does it help with wind?
It steadies the top of the track, but do not run a hoist in wind that moves the load; see the manual.
Can I leave it on the track?
Yes, many crews leave it mounted on the top section.
How does it ship?
Parcel, or on the pallet with a hoist kit.

Tie Down 48599 Submittals and Documentation

Standoff Stabilizer 48599 Sell Sheet (PDF)Specs and fit. Standoff Stabilizer 48599 Instructions (PDF)Mounting instructions.

Compare the Tie Down Ladder Hoist Line

Every Tie Down hoist kit ships with the 4 ft base track and three 8 ft track sections for a 28 ft reach, and extends to 44 ft with extra track. Pick by capacity, power source and platform.

TranzPorter TP250 Kit250 lb, gas or electricTranzPorter TP400 Kit400 lb, gas or electric8 ft Track Section 10091Extend to 44 ftTelescoping Brace 60005Required over 28 ftTranzVolt G2 DeWalt, RoofingBattery, roofing platformTranzVolt G2 DeWalt, SolarBattery, tilt platform

Protecting Gutters on Every Job?

Add the standoff to any TranzPorter order and we ship it on the same pallet.

Call 863-703-4522 to talk to a fall protection specialist.

Tie Down Engineering warrants this product to be free from defects in material and workmanship for 90 days from the date of purchase (six months for TranzVolt G2 equipment). Return the defective unit to the dealer or contact Tie Down for repair or replacement at Tie Down's discretion. The warranty does not cover damage from misuse, alteration, or failure to follow the instruction manual.

About Tie Down Engineering

Related Products

!