FallTech 7393BP Weld-On Puck with Bolt
The FallTech 7393BP is a weld-on puck with bolt for the FallTech 7393B rotating D-ring anchor. The puck is welded to structural steel by a qualified welder, then the rotating anchor bolts onto it, converting a bolt-on anchor to a permanent weld-on installation.
It is a component for the 7393 rotating anchor system and is used per the same instruction manual. It is not a standalone anchor.
Who Needs This Product
This product is a weld-on puck component for the FallTech 7393B rotating D-ring anchor. Steel crews weld the puck to a structural member so the rotating anchor can be mounted permanently. It is a component, not an anchor by itself; use it with the 7393B anchor and a complete personal fall arrest system.
Features
Weld-on mounting
Welds to structural steel for a permanent base for the rotating anchor.
For the 7393B anchor
Purpose-built puck and bolt for the FallTech rotating D-ring anchor.
Genuine FallTech part
OEM component for the 7393 rotating anchor system.
Converts bolt-on to weld-on
Turns a bolt-on install into a permanent welded one.
Durable steel
Stands up to welding and repeated anchor use.
Simple install
Weld the puck, then bolt on the anchor per the manual.
This is a component, not an anchor. The puck provides no fall protection on its own. It must be welded by a qualified welder to sound structural steel and used only with the FallTech 7393B rotating anchor per the instruction manual.
Compliance Standards
ANSI Z359.18-2017
American National Standard for anchorage connectors. Rated 5,000 lb (22.2 kN).
OSHA 29 CFR 1926.502
Federal construction fall protection anchorage requirements.
OSHA 29 CFR 1910
General industry personal fall protection requirements.
Rated 5,000 lb (22.2 kN)
Anchorage strength for personal fall arrest.
Typical Applications
How to Install
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the anchor body, connection point, and hardware for damage before each use.
- Prepare the structure. Confirm the mounting surface is sound and rated to support the anchor per the manual.
- Install and secure. Mount the anchor as specified and set all fasteners to the required torque.
- Connect. Attach your SRL or energy-absorbing lanyard to the connection point.
- Check clearance. Confirm fall clearance and swing-fall with the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the anchor from service for any of the conditions below.
- Anchor body and welds: cracks, bending, deformation, or corrosion.
- D-ring or connection point: deformation, sharp edges, cracks, or corrosion.
- Fasteners and hardware: damaged threads, loose or missing fasteners.
- Labels: illegible or missing markings.
Remove the anchor from service immediately after any fall-arrest event, and destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Weld-on puck with bolt (component) |
|---|---|
| For | FallTech 7393B rotating D-ring anchor |
| Material | Steel |
| Install | Welded to structural steel by a qualified welder |
| Anchorage strength | 5,000 lb (22.2 kN) |
| Capacity (ANSI) | One worker, 130 to 310 lb combined |
| Capacity (OSHA) | One worker, up to 425 lb combined |
| Standards | ANSI Z359.18-2017; OSHA 1926.502 and 1910 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 7393BP Submittals and Documentation
7393BP Instruction Manual (PDF)Installation, capacity, and inspection. 7393BP Declaration of Conformity (PDF)Certification to ANSI Z359.18-2017 (FallTech test lab). 7393BP Spec Sheet (PDF)One-page specifications summary.Related Anchors
- FallTech steel and beam anchors. See the full beam clamp and steel anchor line.
- FallTech fall protection equipment. Harnesses, SRLs, lanyards, and anchors.
Specifying Anchors for Your Crew?
The anchor, the connecting device, and the harness all have to match the structure and the fall clearance below. Confirm your application with us and we will help you choose the right anchor.
Call 863-703-4522 to talk to a fall protection specialist.
