FallTech 7408 toggle-through eyebolt anchor for structural steel, single-hole install
FallTech

FallTech 7408 Toggle-Through Eyebolt Anchor for Steel

(No reviews yet) Write a Review
$95.50
Brand:
FallTech
SKU:
7408
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Anchorage Connectors

FallTech 7408 Toggle-Through Eyebolt Anchor

The FallTech 7408 Toggle-Through Eyebolt Anchor installs through a single drilled hole in structural steel. The toggle passes through the hole and spreads behind the steel, then the eyebolt tightens to create a secure tie-off point from one side.

It is a fast, single-hole steel anchor certified to ANSI Z359.18-2017, rated for 5,000 lb (22.2 kN), for one worker up to 310 lb (ANSI) or 425 lb (OSHA).

FallTech 7408 toggle-through eyebolt anchor for structural steel, single-hole install
5,000 lbsAnchorage Strength (22.2 kN)
Type AANSI Z359.18-2017
1 Worker310 lb ANSI / 425 lb OSHA
Single HoleToggle-Through
One-Side InstallNo Rear Access
EyeboltConnection Point
SteelStructural Mount
RemovableReusable Anchor

Who Needs This Product

This product is a toggle-through eyebolt anchor, the anchorage component of a personal fall arrest system. Steel workers install it through a single hole to create a tie-off point where the back of the steel cannot be reached, then connect an SRL or lanyard. You still need a certified full-body harness and a compatible connecting device.

Features

Single-hole install

Installs through one drilled hole for a fast anchor point.

Toggle-through design

The toggle spreads behind the steel so you can install from one side.

No rear access needed

Ideal where the back of the member is not reachable.

Eyebolt connection

Strong connection point for an SRL or lanyard.

Reusable

Remove the anchor and reuse it on the next hole.

ANSI Z359.18-2017

Certified anchorage rated for 5,000 lb (22.2 kN).

⚠

Confirm the toggle is fully seated and tightened. Drill the correct hole in sound steel, confirm the toggle has spread fully behind the member, and tighten the eyebolt per the manual. Confirm fall clearance and swing-fall with the Fall Protection Calculator below.

Compliance Standards

ANSI Z359.18-2017

American National Standard for anchorage connectors. Rated 5,000 lb (22.2 kN).

OSHA 29 CFR 1926.502

Federal construction fall protection anchorage requirements.

OSHA 29 CFR 1910

General industry personal fall protection requirements.

Rated 5,000 lb (22.2 kN)

Anchorage strength for personal fall arrest.

Typical Applications

Steel erectionFast single-hole tie-off on structural steel.
Industrial and plantAnchor points where rear access is limited.
ManufacturingQuick anchors on steel structures.
BridgeTie-off on box or closed sections.
MaintenanceReusable anchor for return work.
InspectionPortable single-hole anchor.

How to Install

Follow the FallTech instruction manual. The sequence below is an overview only.

  1. Inspect. Check the anchor body, connection point, and hardware for damage before each use.
  2. Prepare the structure. Confirm the mounting surface is sound and rated to support the anchor per the manual.
  3. Install and secure. Mount the anchor as specified and set all fasteners to the required torque.
  4. Connect. Attach your SRL or energy-absorbing lanyard to the connection point.
  5. Check clearance. Confirm fall clearance and swing-fall with the calculator below.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the anchor from service for any of the conditions below.

  • Anchor body and welds: cracks, bending, deformation, or corrosion.
  • D-ring or connection point: deformation, sharp edges, cracks, or corrosion.
  • Fasteners and hardware: damaged threads, loose or missing fasteners.
  • Labels: illegible or missing markings.

Remove the anchor from service immediately after any fall-arrest event, and destroy retired equipment so it cannot return to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeToggle-through eyebolt anchor for steel
InstallSingle drilled hole, one-side installation
Anchorage classificationANSI Z359.18-2017
ConnectionEyebolt
Anchorage strength5,000 lb (22.2 kN)
Capacity (ANSI)One worker, 130 to 310 lb combined
Capacity (OSHA)One worker, up to 425 lb combined
StandardsANSI Z359.18-2017; OSHA 1926.502 and 1910
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

How does a toggle-through anchor work?
You drill one hole, pass the toggle through, and it spreads behind the steel. Tightening the eyebolt clamps the anchor in place from one side.
When is this anchor useful?
When you cannot reach the back of the steel member, since the whole install is done from the front through a single hole.
Is it reusable?
Yes. Loosen and remove the anchor, then reuse it on the next hole per the manual.
What is the rated strength and capacity?
Certified to ANSI Z359.18-2017 with 5,000 lb (22.2 kN) strength, for one worker up to 310 lb (ANSI) or 425 lb (OSHA).
What hole size does it need?
The manual requires an installation hole of 13/16 in minimum and 1-1/4 in maximum, free of jagged or abrasive edges. Insert the barrel from below with the spring compressed and confirm the toggle plate fully deploys and engages the structure.
What do I connect to it?
Connect a compatible SRL or energy-absorbing lanyard to the connection point, used with a certified full-body harness.
Can it be reused after a fall?
No. Remove the anchor from service immediately after any fall-arrest event and destroy it so it cannot be reused.

FallTech 7408 Submittals and Documentation

7408 Instruction Manual (PDF)Installation, capacity, and inspection. 7408 Declaration of Conformity (PDF)Certification to ANSI Z359.18-2017 (FallTech test lab). 7408 Spec Sheet (PDF)One-page specifications summary.

Related Anchors

Specifying Anchors for Your Crew?

The anchor, the connecting device, and the harness all have to match the structure and the fall clearance below. Confirm your application with us and we will help you choose the right anchor.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech 2-Year Limited Warranty. FallTech warrants to the buyer that all products are free from defects in material and workmanship at the time of shipment. Obligation is limited to product replacement for two (2) years from the date of installation or use by the owner, not to exceed two (2) years from the date of shipment. This warranty is not transferable and is void if the product is changed, altered, or used in a manner other than intended. It covers defects in material and workmanship only; it does not cover normal wear and tear, neglect, abuse, or accident. The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the FallTech product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!