FallTech Arc Flash Rescue Straps, Kevlar and Nomex, 2-Pack
For use in self-rescue/rescue scenarios where a traditional frontal connection is not available. Features Kevlar webbing and thread.
Complies with ASTM F887-13 and meets OSHA 1926.502 regulations.
Who Needs This Product
Crews with a written rescue plan stock the accessories that make a rescue work in practice: a reach pole to bring a suspended worker's lanyard within grasp, a rescue ladder for conscious-victim self-rescue, straps and edge protection that keep the rescue rigging intact. These are the pieces that turn a plan on paper into minutes-not-hours response.
Features
For use in self-rescue/rescue scenarios
For use in self-rescue/rescue scenarios where a traditional frontal connection is not available.
Features Kevlar webbing and thread
Features Kevlar webbing and thread.
Complies
Complies with ASTM F887-13 and meets OSHA 1926.502 regulations.
Accessories only work inside a plan. A rescue pole or ladder saves a suspended worker only when your written rescue plan names it, stages it at the work area, and the crew has practiced with it. Suspension trauma starts in minutes, so build the plan around speed.
Compliance Standards
ASTM F887-13
Applicable requirement for this equipment: ASTM F887-13.
OSHA 1926.502(d)(20)
Employers must provide for prompt rescue of employees in the event of a fall or ensure employees can rescue themselves.
Typical Applications
How to Use
Follow the FallTech instruction manual. The sequence below is an overview only.
- Match it to your plan. Confirm the accessory fits the rescue scenario your plan describes.
- Stage it with the kit. Keep rescue accessories with the descent kit at the work area.
- Deploy per the manual. Follow the FallTech instructions for connection points and use.
- Log and inspect. Return it to the kit after use and record the deployment.
Inspection and Retirement
Inspect before each use and at least annually by a competent person.
- Webbing and rope: cuts, burns, chemical damage, and UV wear.
- Hardware: gates lock, no cracks or corrosion.
- Function: telescoping locks, guides, and connectors operate correctly.
Retirement triggers: any rescue loading, damaged webbing or hardware, or a failed function check.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Arc Flash Rescue Straps |
|---|---|
| SKU | 68031AF2 |
| Static Strength | 5,000 lb min. |
| OSHA User Capacity | 130 to 425 lb max. |
| Webbing | Kevlar; 5,000 lb min. static strength |
| Standards | ASTM F887-13; OSHA 1926.502 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 68031AF2 Submittals and Documentation
68031AF2 Declaration of Conformity (PDF)Manufacturer conformity certification for compliance files and submittal packages. 68031AF2 Instruction Manual (PDF)Installation, use, capacity, and inspection procedures. 68031AF2 Spec Sheet (PDF)Full specifications, features, and compliance summary for submittal packages.Complete Your Rescue Plan
- FallTech Rescue and Descent Worksite Kit with Storage Bag. The worksite rescue kit in four lengths.
- FallTech 5030 Controlled Descent Device with Carabiners. Constant-speed emergency descent.
- FallTech Rescue and Descent Crane Kit with Sealed Barrel. The barrel-staged rescue and descent kit.
- FallTech 20 ft Assisted Rescue Ladder. Self-rescue for conscious victims.
Building a Rescue Plan for Your Crew?
The right rescue equipment depends on your heights, structures, and crew training. Confirm your application with us and we will make sure every component matches before it ships.
Call 863-703-4522 to talk to a fall protection specialist.
