Combat Compliance Kit
The Frontline K100-62R Combat Compliance Kit pairs a Combat universal harness with the LIS62R twin-leg rebar-hook lanyard so crews can stay tied off through every transition. 100 percent tie-off, internal shock pack on each leg, large-throat rebar hooks for column and rebar connections. The components ship separately so the harness can run with a different lanyard when the job changes.
Ships as a complete 3-piece kit. Rated to a 310 lb capacity and 5,000 lb breaking strength. Compliant with ANSI Z359.11-2014 and OSHA 29 CFR 1926.502 and 1910.140.
Who Needs This Product
This product is a personal fall protection compliance kit. It bundles a full-body harness and an energy-absorbing lanyard so a crew member has a complete personal fall arrest system in one bag. Pair the kit with a certified anchor rated to 5,000 lb. The kit components ship separately and can be run with other compatible equipment when the application changes.
Features
Twin-leg lanyard supports 100 percent tie-off
Connect one hook to the new anchor before releasing the other; never unprotected during transitions.
Large-throat rebar hooks
Designed for rebar, columns, and oversized anchor points common in formwork and structural steel.
Components separate, not permanently attached
Harness and lanyard run independently when the application changes.
Internal shock pack on each leg limits arrest force to ≤900 lb
Each leg absorbs energy, so the force on the worker remains below the OSHA 1,800-lb arrest cap.
Universal sizing fits most users
One SKU covers most of the crew; simplifies the storeroom rotation.
Fall indicators on the lanyard and harness
Visual indicators show whether the components have been subject to a fall event.
Kit Components
| Component | Description |
|---|---|
| Harness (100VTB-style universal) | Combat Series Economy full body harness with tongue buckle leg straps, dorsal D-ring, universal sizing. |
| LIS62R 6 ft Twin Leg Rebar Hook Lanyard | Combat twin-leg shock-absorbing rebar-hook lanyard, 6 ft, internal shock pack per leg. |
| FL drawstring bag | Polyester drawstring storage bag, fits the full kit. |
Technical Specifications
| Series | Combat Compliance Kit |
|---|---|
| SKU | K100-62R |
| Rated user capacity | 310 lb (worker, clothing, tools, and harness combined) |
| Breaking strength | 5,000 lb |
| Webbing material | Safety orange polyester |
| Webbing width | 1.73 in |
| Stitching | High-tenacity polyester |
| Hardware | Steel |
| D-rings | Dorsal (primary fall arrest anchor between the shoulder blades) |
| Weight | Kit total 7.5 - 8.0 lbs |
| Available sizes | UN (Universal: fits most users) |
| ANSI standard | Z359.11-2014 |
| OSHA alignment | 29 CFR 1910.140; 29 CFR 1926.502 |
Capacity and free fall. The 310 lb capacity includes the worker plus clothing, tools, and harness combined. Maximum free fall for a personal fall arrest system is 6 ft per OSHA 1926.502 when anchored at the dorsal D-ring. Calculate fall clearance for every setup before tying off.
Compliance Standards
ANSI Z359.11-2014
American National Standards Institute fall protection standard for this product class.
OSHA 29 CFR 1926
Subpart M construction industry fall protection (1926.500-503).
OSHA 29 CFR 1910
Subpart I general industry walking-working surfaces and PPE.
Typical Applications
Donning Overview
Single-operator donning per the Frontline user manual. Always refer to the manual for the full procedure.
- Inspect. Run the harness through a pre-use inspection: webbing, hardware, stitching, labels, fall indicators.
- Orient. Hold the harness up by the dorsal D-ring. Shake the leg straps free so they hang clean.
- Shoulders. Slip both arms through the shoulder straps with the dorsal D-ring centered between the shoulder blades.
- Chest. Connect the chest buckle. Adjust so the strap sits 6 to 8 inches below the collarbone.
- Legs. Pass each leg strap under the thigh and connect at the leg buckle. Tighten until two fingers fit between strap and thigh.
- Tighten. Adjust shoulders, chest, and legs evenly. The dorsal D-ring should rest between the shoulder blades, not riding up the neck or down the lower back.
Inspection and Retirement
Inspect every component before each use. A competent person formally inspects at documented intervals, typically every 6 months under ANSI Z359.2. Pull the equipment out of service for any of the conditions below.
- Webbing: cuts, burns, abrasion, chemical attack, broken threads, loose stitching.
- Hardware: cracks, deformation, sharp edges, corrosion, improper function of buckles and D-rings.
- Stitching: cut, broken, or loose stitches; pulled threads at any load point.
- Labels: legible and intact. Date of first use recorded.
- Fall indicators: any deployed or stretched indicator pulls the equipment out of service immediately.
- Connectors and hooks: gates close fully under spring tension; latches lock; no rollout exposure.
Retirement triggers: any deployed fall indicator, any equipment involved in a fall event, any chemical exposure outside the manufacturer-published list, or any condition where the inspector cannot positively verify the equipment is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Frontline K100-62R Submittals and Documentation
Frontline K100-62R Spec Sheet (PDF)Dimensions, weights, materials, hardware, and the full feature and compliance summary. Frontline K100-62R Independent Lab Test Report (PDF)Independent third-party lab test results verifying the ANSI performance clauses. Frontline K100-62R User Instruction Manual (PDF)Donning, adjustment, inspection, and retirement procedures.Compatible and Related Products
- Combat Compliance Kit: Harness + 6 ft Single Leg Lanyard (K100-61S). Harness + 6 ft lanyard + bag.
- Combat Compliance Kit: Harness + 6 ft SRL (K100-RPW061S). Harness + 6 ft web SRL + bag.
- Combat Plus Complete Roofer Kit (RK050V50). Padded harness + 50 ft polysteel vertical lifeline with rope grab + reusable roof anchor + bag.
- Combat Lite Vest Harness: aluminum hardware (110VTB). Vest cut, aluminum hardware, suspension trauma straps, moisture-wicking pads.
Specifying a Complete Fall Protection Kit?
Need help specifying the right system for your jobsite? Confirm your application, anchorage, and clearance with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
