Velocity Standard Full Body Harness, Universal S-L
The Guardian 01700 Velocity is the compliance harness that made Guardian a jobsite standard: durable polyester webbing, five points of adjustment at the chest, shoulders, and legs, and low-profile pass-through buckles that stay out of the way all day. Universal S-L sizing fits the majority of workers straight off the truck.
Certified to ANSI Z359.11 and compliant with OSHA 1926.502 and 1910.140, the Velocity supports workers from 130 to 420 lbs. Wear-indicating webbing shows a red inner core when replacement is due, dual reusable lanyard keepers stow unused connector legs and release under snag loads, and a customizable ID patch records user and inspection details without marking the webbing.
Guardian Harness Sizing Chart
Height (ft) by Weight (lb)
Blocks overlap by design: in an overlap, either size fits. Approximate bands: Small 100 to 160 lb and 5 ft to 6 ft. M-L 130 to 240 lb and 5 ft to 6 ft 2 in. XL 180 to 300 lb and 5 ft 2 in to 6 ft 4 in. 2XL 240 to 360 lb and 5 ft 4 in to 6 ft 6 in. 3XL 300 to 420 lb and 5 ft 6 in to 6 ft 8 in. Guardian harnesses sold as Universal or S-L span the Small and M-L bands, and XL-XXL spans the XL and 2XL bands. Based on the manufacturer's published Guardian sizing chart; verify fit per the instruction manual before first use.
Who Needs This Product
The Velocity is the harness for the price-conscious crew that still refuses to compromise on certification: a genuine ANSI Z359.11 harness with the details that matter day to day, breakaway lanyard keepers so a snagged leg releases instead of pulling the worker, wear-indicating webbing that tells the inspector when it is done, and an ID patch for compliance records. It is the same harness included in the Bucket of Safe-Tie kit. Crews that want padding, quick-connect buckles, or more hardware step up to the Series 1 and Series 3 lines.
Features
Certified everyday protection
Durable polyester webbing construction meets OSHA and ANSI Z359.11 standards.
Five points of adjustment
Chest, shoulder, and leg adjustments deliver a secure, all-day fit across the S-L range.
Low-profile pass-through buckles
Chest and leg connections stay flat and out of the way during work.
Breakaway lanyard keepers
Dual reusable keepers stow unused connector legs and release safely when excessive force is applied.
Wear-indicating webbing
A red inner core shows through when the webbing is worn to replacement.
Compliance ID patch
A customizable patch records user or inspection details without harming the webbing.
Technical Specifications
| SKU | 01700 |
|---|---|
| Product | Velocity Standard Harness |
| Size | Universal S-L |
| Buckles | Pass-through chest, pass-through legs |
| Worker capacity | 130-420 lbs including all clothing, tools, and equipment |
| D-ring | Dorsal |
| Adjustment points | 5 (chest, shoulders, legs) |
| Webbing | Polyester with red wear-indicating inner core |
| Materials | Steel, polyester, and nylon |
| Weight | 3 lbs |
| Standards | ANSI Z359.11-2021; OSHA 1926.502; OSHA 1910.140 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Fit before the first step up. Adjust all five points so the dorsal D-ring sits between the shoulder blades, the chest strap crosses mid-chest, and leg straps allow a flat hand but not a fist. A harness that shows red core webbing anywhere is done: retire it immediately.
Compliance Standards
ANSI Z359.11-2021
Certified full body harness tested in an ISO 17025 accredited laboratory.
OSHA 1926.502
Meets construction personal fall arrest system requirements.
OSHA 1910.140
Meets general industry personal fall protection system requirements.
130-420 lbs capacity
Covers the full OSHA capacity range including clothing, tools, and equipment.
Typical Applications
Donning Overview
Donning must follow the Guardian Velocity instruction manual (85047). The sequence below is an overview only.
- Inspect first. Check webbing (no red core showing), stitching, D-ring, and buckles before every use.
- Shake out and orient. Hold by the dorsal D-ring; straps fall into place without twists.
- Arms through. Put the harness on like a jacket, shoulder straps over both shoulders.
- Buckle the chest. Connect the pass-through chest buckle at mid-chest height.
- Buckle the legs. Pass each leg strap through its buckle; snug so a flat hand fits but a fist does not.
- Adjust and check. Set all five points, confirm the dorsal D-ring sits between the shoulder blades, and stow loose ends in the keepers.
Inspection and Retirement
Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the harness from service for any of the conditions below.
- Webbing: any red inner core showing, cuts, fraying, abrasion, burns, or chemical damage.
- Stitching: broken, pulled, or abraded threads, especially at load-bearing junctions.
- D-ring: cracks, corrosion, deformation, or excessive movement.
- Buckles: cracks, deformation, or pass-throughs that do not seat fully.
- Labels: missing or illegible, including the ID patch record.
Retirement triggers: any fall arrest event, any red core webbing showing, or any condition where the inspector cannot positively verify the harness is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian 01700 Velocity Harness Submittals and Documentation
Guardian 01700 Velocity Harness Instruction Manual (PDF)Donning, adjustment, worker classifications, and inspection criteria.Guardian 01700 Velocity Harness Technical Data Sheet (PDF)Sizing, materials, and the full compliance summary.Guardian 01700 Velocity Harness Test Report (PDF)ISO 17025 accredited laboratory test results to ANSI Z359.11.Guardian 01700 Declaration of Conformity (PDF)Manufacturer declaration of conformity to ANSI Z359.11.Guardian Harness Inspection Form (PDF)Printable competent-person inspection checklist for Guardian harnesses.Compatible and Related Products
- Guardian 00815 Bucket of Safe-Tie Rooftop Safety Kit. Complete kit built around this harness.
- Guardian 10733 Suspension Trauma Strap 4-Pack. Add a trauma strap to every harness on the crew.
- Guardian External Shock Absorbing Lanyard 2-Pack. Connecting devices to pair with this harness.
Outfitting a Crew with Harnesses?
Sizing, buckle styles, and duty level decide the right harness line. Confirm your crew with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
