Ms. Miller Women's Full Body Harness
The Ms. Miller E570 is engineered specifically for female workers instead of being a smaller version of a men's harness: shoulder straps are positioned away from the chest, the hip support is shaped for a woman's frame, and the patented elastomer webbing stretches and conforms to the body so the harness moves with the worker instead of bunching or binding.
Certified to ANSI Z359.11 and compliant with OSHA fall protection requirements, the E570 supports workers up to 400 lb with five points of adjustment and mating-style buckles at the chest and legs.
Miller Harness Sizing Chart
Height (ft) by Weight (lb)
| 110 | 130 | 150 | 170 | 190 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | 370 | 390 | 400 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6′6″ | ||||||||||||||||
| 6′4″ | XXL/XXXL | |||||||||||||||
| 6′2″ | ||||||||||||||||
| 6′ | ||||||||||||||||
| 5′10″ | UNIVERSALMost Popular Size (L/XL) | |||||||||||||||
| 5′8″ | ||||||||||||||||
| 5′6″ | ||||||||||||||||
| 5′4″ | ||||||||||||||||
| 5′2″ | S/M | |||||||||||||||
| 5′ |
S/M fits workers up to 5 ft 10 in and 170 lb, or up to 190 lb at 5 ft 6 in and under. Universal (L/XL) covers the broad middle and is the most popular size. XXL/XXXL fits workers over 6 ft who weigh over 270 lb, and any worker from 350 to 400 lb. Lighter boundary bands are overlap zones where either size fits: size down for a trim fit or up for room over layers. Some Miller spec sheets list these as Size 1 (S/M), Size 2 Universal (L/XL), and Size 3 (2XL and 3XL). Based on the manufacturer's published Miller sizing chart; verify fit per the user manual before first use.
Who Needs This Product
The E570 is for crews that outfit women with equipment that actually fits. A standard unisex harness rides on pressure points, binds across the chest, and needs constant readjustment on many female workers; the E570 repositions the shoulder straps, reshapes the hip support, and adds stretch to the webbing itself. The result is a harness women keep properly buckled and adjusted all shift, which is what makes fall protection work.
Features
Female-Specific Ergonomics
Shoulder straps are positioned away from the chest and the hip support is shaped for a woman's frame, eliminating the pressure points of unisex designs.
Elastomer Stretch Webbing
Patented webbing stretches and conforms to the body, moving with the worker and eliminating bunching and binding.
Back D-Rings
The dorsal D-ring provides the fall arrest connection, positioned between the shoulder blades.
Mating-Style Buckles
Interlocking buckles at the chest and legs seat positively, verify at a glance, and work with gloves on.
Five Points of Adjustment
Adjustment at the chest, both shoulders, and both legs delivers a precise fit across the size range.
Reduced Fatigue
Less pressure and binding means less end-of-shift fatigue and better compliance with wearing the harness correctly.
Technical Specifications
| SKU | E570 family |
|---|---|
| Product | Ms. Miller Women's Full Body Harness |
| Sizes | S/M, L/XL |
| Color | Green |
| D-ring | Dorsal (back) |
| Buckles | Mating-style chest and legs |
| Adjustment points | 5 (chest, shoulders, legs) |
| Webbing | Patented elastomer stretch webbing |
| Max working load | 400 lb / 181 kg including all clothing, tools, and equipment |
| Packaging | Bagged each |
| Country of origin | Mexico |
| Standards | ANSI Z359.11; OSHA 1926.502; OSHA 1910.140; TAA compliant |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
Sizes and Ordering Information
| Size | SKU | UPC |
|---|---|---|
| S/M | E570/S/MRN | 612230049683 |
| L/XL | E570/URNU | 612230049690 |
Both stocked sizes are selectable from the size options above. An XS size is made by the vendor; contact us for availability.
Fit is the whole point. Adjust all five points so the dorsal D-ring sits between the shoulder blades and the chest strap crosses mid-chest without binding. A harness that has arrested a fall is done: remove it from service immediately.
Compliance Standards
ANSI Z359.11
Certified to the ANSI/ASSE Z359.11 standard for full body harnesses, covering design, testing, and marking requirements.
OSHA 1926.502 and 1910.140
Meets OSHA requirements for personal fall arrest system body wear in both construction and general industry.
TAA Compliant
Listed as TAA compliant by the manufacturer, allowing purchase on federal projects that require Trade Agreements Act sourcing.
Typical Applications
Donning Overview
- Hold the harness by the back D-ring and shake it out so the straps hang free without twists.
- Slip the shoulder straps on like a vest, keeping the webbing flat against the body.
- Connect the chest buckle and position the chest strap across the middle of the chest.
- Fasten each leg buckle so the strap allows a flat hand between the strap and the leg, but not a fist.
- Work through all five adjustment points until the dorsal D-ring rests between the shoulder blades, then stow the strap ends.
Full donning and adjustment instructions are in the Miller harness manual linked in the documentation section below.
Inspection and Retirement
Inspect this harness before each use, and have a competent person other than the user formally inspect it at least annually per ANSI Z359.2. Check each point below and record the results on the inspection form linked in the documentation section.
- Webbing: cuts, frays, burns, chemical damage, UV fading, or broken stitching anywhere on the harness.
- Hardware: D-rings and buckles for cracks, corrosion, distortion, or sharp edges.
- Adjusters and keepers: slippage, missing keepers, or strap ends that will not stay stowed.
- Labels: present and legible, including the size, standards, and serial information.
Retirement triggers: any fall arrest event, any webbing or hardware defect found during inspection, or any condition where the inspector cannot positively verify the harness is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Ms. Miller E570 Harness Submittals and Documentation
E570 Specification Sheet (PDF)Technical data, sizing, materials, and SKU-level UPC information. E570 User Instruction Manual (PDF)Miller I119 manual: donning, adjustment, use limitations, and inspection criteria. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. E570 Harness Inspection Form (PDF)Printable pass/fail checklist for documented harness inspections.Compatible and Related Products
- Miller T4500 Titan II Non-Stretch Harness. The hi-viz general purpose harness in the same Titan II line.
- Guardian CR5 Class 1 Single Leg Web SRL, 6 ft. A compact web SRL to pair with the dorsal D-ring.
- Guardian 10733 Suspension Trauma Strap, 4-Pack. Add a trauma relief strap to every harness on the crew.
Outfitting Women on Your Crew?
Sizing and fit decide whether a harness protects. Confirm your crew with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
