Long Toe Rail Bracket Attachment, 2-Pack
The Guardian 15185 adds the toeboard: a long toe rail bracket that attaches to the guardrail system and holds the kick plate OSHA requires wherever material could fall on workers below. Sold as a 2-pack to complete a rail section.
Installed per the manual, it supports the toeboard provisions of OSHA 1926.502.
Who Needs This Product
Guardrails stop workers; toeboards stop the hammer that follows. Wherever trades stack below the protected edge, the kick plate is part of the compliant rail, and the long bracket makes it a bolt-on instead of a site-built afterthought.
Features
For Guardian baseplate # 15180
For Guardian baseplate # 15180
Durable, galvanized steel
Durable, galvanized steel
Compatible with 2x4 lumber
Compatible with 2x4 lumber
Jobsite-grade construction
Built with the materials and finish quality Guardian applies across its height safety line.
Documented compliance
Full manufacturer documentation is linked on this page for submittal packages.
Fleet-friendly inspection
Clear inspection criteria in the manual keep competent-person checks fast and consistent.
Technical Specifications
| SKU | 15185-2PK |
|---|---|
| Materials | Galvanized Steel |
| Product weight | 2.9 lbs |
| Dimensions | 0 in L x 0 in W x 0 in H |
| Standards | OHSA 1910.29, OSHA 1926.502 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Passive protection has hard numbers. OSHA 1926.502(b) requires guardrail top rails at 42 in (plus or minus 3 in) that withstand 200 lbs outward and downward force, with midrails at 21 in. Verify the assembled system meets these numbers before workers rely on it.
Compliance Standards
OHSA 1910.29
This product is compliant with OHSA 1910.29 when used as part of a complete, competent-person verified system.
OSHA 1926.502
This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.
ISO 17025 lab tested
Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.
Typical Applications
Installation Overview
Installation must follow the Guardian guardrail documentation. The sequence below is an overview only.
- Inspect first. Check all components for damage before assembly.
- Verify the structure. The mounting surface must meet the strength requirements in the instruction documentation.
- Install per the manual. Follow the spacing, fastening, and assembly requirements exactly.
- Complete the run. Install top rails, midrails, and toeboards as the system and OSHA 1926.502(b) require.
- Verify the system. Confirm rigidity and completeness before workers rely on it.
- Reinspect on schedule. Check the installed system regularly and after any impact or weather event.
Inspection and Retirement
Inspect installed systems regularly and after any impact. Remove components from service for any of the conditions below.
- Bent, cracked, or deformed posts, bases, or brackets.
- Loose or missing fasteners and connections.
- Corrosion or UV damage that weakens components.
- Rails that do not meet height and strength requirements.
- Missing or illegible markings.
Retirement triggers: structural damage, failed connections, or any condition where the inspector cannot positively verify the system is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian 15185 Long Toe Rail Bracket Attachment, 2-Pack Submittals and Documentation
Guardian Toeboard Attachment Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Compatible and Related Products
- Guardian 00455 Temper Roof Anchor 4-Pack. Reusable residential roof anchors.
- Guardian Series 3 Harness. The padded general construction harness line.
- Guardian External Shock Absorbing Lanyard 2-Pack. Connecting devices for anchored workers.
Laying Out Passive Protection?
Edge lengths, mounting surfaces, and access points decide the component list. Confirm your layout with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
