FallTech C7372 CSA Pass-Through Choker Anchor, 6 ft, 2-Pack: two anchors per pack (2x badge indicates pack quantity, photo shows one anchor)
FallTech

FallTech C7372 CSA Pass-Through Choker Anchor, 6 ft, 2-Pack

(No reviews yet) Write a Review
$107.00
Brand:
FallTech
SKU:
C7372-2PK
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech CSA Certified Anchors

FallTech C7372 CSA Pass-Through Choker Anchor, 6 ft, 2-Pack

CSA Z259.15-2017 certified version of the FallTech 6 ft pass-through choker anchor, sold as a 2-pack.

Features 1-3/4 in load-bearing polyester web with a 3 in wide full-length wear pad, plus appropriately sized alloy steel D-rings for simple pass-through choke-on installation.

FallTech C7372 CSA certified 6 ft pass-through choker anchor strap with heavy-duty wear pad, 2-pack
CSA Z259.15Certified Anchor
6 ftChoker Length
5,000 lbStatic Strength
3 inWear Pad Width
136-310 lbCSA/ANSI Capacity
130-425 lbOSHA Capacity
2-PackSold Quantity
1-3/4 inWeb Width

Who Needs This Product

Canadian jobsites and CSA-governed contracts need anchorage connectors with CSA paperwork, not just ANSI. The C7372 is the CSA-certified twin of the FallTech 7372: the same 6 ft pass-through choker with a heavy-duty wear pad, listed by part number on FallTech CSA DoC #AC0620001c to CSA Z259.15-2017. Sold as a 2-pack so both ends of a crew are covered.

Features

Pass-through choke-on install

Appropriately sized alloy steel D-rings let the strap choke onto beams, columns, and other structure in seconds.

Heavy-duty wear pad

A 3 in wide full-length wear pad protects the 1-3/4 in load-bearing web from abrasion.

Shorten as needed

The strap may be passed through multiple times to shorten the effective length.

Dual connection points

The smaller D-ring provides the connection point for SRLs and lanyards.

Reinforced terminations

Each D-ring termination features three individual 2 in box-stitches for longer life.

CSA and ANSI paperwork

Listed on CSA DoC #AC0620001c (CSA Z259.15-2017) and ANSI DoC #A0118004d (ANSI Z359.18-2017).

⚠

Choke on structure, not on edges. Wrap the anchor around structural members of suitable strength, keep the web clear of sharp or abrasive edges, and never connect the lanyard directly to the web. The anchorage must support 5,000 lb per worker or be part of an engineered system.

Compliance Standards

CSA Z259.15-2017

Canadian anchorage connector standard; the C7372 is listed by part number on FallTech CSA DoC #AC0620001c.

ANSI Z359.18-2017

United States anchorage connector standard; the C7372 also appears on FallTech DoC #A0118004d.

OSHA 1926.502 and 1910.66

United States fall protection criteria for personal fall arrest system anchorages.

US Version Available

Need the ANSI-listed US version? The FallTech 7372 family is linked in the related products section.

Typical Applications

Canadian jobsitesCSA-certified anchorage paperwork on file.
Steel beamsChoke-on tie-off around beams and columns.
Cross-border fleetsOne anchor spec for US and Canadian crews.
SRL tie-offOverhead choke point for SRLs and lanyards.
Temporary anchorageReusable, movable tie-off as work progresses.

How to Use

Follow the FallTech MANC03 instruction manual. The sequence below is an overview only.

  1. Select the member. A competent person verifies the structure can take 5,000 lb per attached worker or is part of an engineered system.
  2. Wrap and pass through. Wrap the strap around the member and pass the small D-ring through the large D-ring; pass through again to shorten.
  3. Seat the wear pad. Position the pad where the web bears on the structure.
  4. Connect the system. Snap the lanyard or SRL hook onto the small D-ring only.
  5. Inspect before each use. Web, stitching, wear pad, and both D-rings.

Inspection and Retirement

Inspect before each use, with a documented competent person inspection at least annually.

  • Webbing: cuts, burns, fraying, UV chalking, and chemical damage.
  • Wear pad: in place and covering the bearing surface.
  • Stitching: all three 2 in box-stitches intact at each termination.
  • D-rings: no deformation, cracks, nicks, or corrosion.
  • Labels: legible with serial and date recorded in the inspection log.

Retirement triggers: any fall arrest event, damaged web or stitching, deformed hardware, or a failed inspection.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypePass-through choker anchorage connector, CSA certified
SKUC7372-2PK (two C7372 anchors)
Length6 ft
Webbing1-3/4 in polyester; 5,000 lb minimum static strength
Wear Pad3 in polyester webbing, full length
D-RingsPlated alloy steel; 5,000 lb minimum static strength
User Capacity136 to 310 lb (CSA and ANSI); 130 to 425 lb (OSHA)
StandardsCSA Z259.15-2017 (DoC #AC0620001c); ANSI Z359.18-2017 (DoC #A0118004d); OSHA 1926.502 and 1910.66
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

What is the difference between the C7372 and the 7372?
They are the same 6 ft pass-through choker anchor design; the C7372 carries the CSA-specific part number and labeling, and it is listed on FallTech CSA DoC #AC0620001c to CSA Z259.15-2017. The US 7372 family page is linked below.
Is it also legal on US jobsites?
Yes. The C7372 appears on FallTech ANSI DoC #A0118004d to ANSI Z359.18-2017 and meets OSHA 1926.502, so it works on both sides of the border.
How does the pass-through install work?
Wrap the strap around a structural member, then pass the small D-ring through the large D-ring and pull snug. The strap may be passed through multiple times to shorten the working length.
What connects to which D-ring?
The system connector (lanyard snap hook or SRL) attaches to the smaller D-ring only. The large D-ring is the pass-through element and never receives the hook directly against the web.
Why is it sold as a 2-pack?
Anchor straps are consumable rigging that crews position and leave in place as work progresses. The 2-pack matches how the US 7372 family is sold and keeps the line item above freight-friendly order minimums.
What capacity is it rated for?
136 to 310 lb per FallTech CSA and ANSI product data, and 130 to 425 lb under OSHA. It is a single-worker anchorage connector with 5,000 lb minimum static strength.
How quickly does the C7372 2-pack ship?
Usually ships in 1 business day from our warehouse. Delivery time is based on the delivery location.

Submittal Documents

C7372 Instruction ManualFallTech MANC03 instruction manual covering the pass-through choker anchor family.C7372 Declaration of Conformity (CSA)FallTech CSA DoC #AC0620001c listing the C7372, CSA Z259.15-2017.C7372 Declaration of Conformity (ANSI)FallTech DoC #A0118004d listing the C7372, ANSI Z359.18-2017.7372 Family Spec SheetSpecification summary for the pass-through choker anchor family.

Related FallTech Gear

Related FallTech anchorage and system components.

Talk to a Fall Protection Specialist

Questions about the C7372 CSA choker anchor 2-pack, compatibility, or compliance paperwork? Call 863-703-4522 and we will walk the job with you. Fall Protection Distributors, LLC is an authorized FallTech dealer, and every unit ships new and warrantied.

FallTech 2-Year Limited Warranty. FallTech warrants to the buyer that all products are free from defects in material and workmanship at the time of shipment. Obligation is limited to product replacement for two (2) years from the date of installation or use by the owner, not to exceed two (2) years from the date of shipment. This warranty is not transferable and is void if the product is changed, altered, or used in a manner other than intended. It covers defects in material and workmanship only; it does not cover normal wear and tear, neglect, abuse, or accident. The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the FallTech product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!