Ladder Stability Anchor with Two 4 ft Straps
The Guardian 10808 attacks the top cause of ladder accidents, the ladder moving, by anchoring the ladder itself to the structure. The kit includes the stability anchor and two 4 ft straps that secure the ladder top against kick-out, slide, and wind per the instruction manual.
It complements the OSHA 1926.1053 requirement that ladders be secured against displacement, and pairs with the Safe-T Ladder Extension for a complete access setup.
Who Needs This Product
Crews secure ladders with rope and hope more often than anyone admits. The 10808 makes the tie-off a system: anchor to the structure, strap the ladder top, and the ladder stays put through the day of climbing, gusts included. For service companies whose techs work alone off extension ladders, a secured ladder is the difference between policy and practice.
Features
OSHA-compliant ladder safety
Meets OSHA 1926.1053(b)(1) for secure ladder stabilization on roofs and elevated surfaces
Non-penetrating roof clamp
Attaches securely to fascia boards or rafters without damaging roofing materials
Fast, tool-free installation
Requires no special tools and sets up in seconds for quick deployment on the job site
Complete stability system
Includes two 48" Velcro straps to firmly secure the ladder to the anchor point
Lightweight, durable construction
Built from corrosion-resistant aluminum for long-lasting use in all jobsite conditions
Jobsite-grade construction
Built with the materials and finish quality Guardian applies across its height safety line.
Technical Specifications
| SKU | 10808 |
|---|---|
| Materials | Aluminum, Nylon |
| Product weight | 2.2 lbs |
| Dimensions | 6 in L x 6 in W x 4 in H |
| Standards | OSHA 1910.140, OSHA 1926.502 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Anchorage strength is the foundation of the system. The structure and anchor must withstand 5,000 lbs per attached worker or maintain a 2:1 safety factor under qualified-person supervision. Verify substrate, fastener, and orientation requirements against the instruction manual before every installation.
Compliance Standards
OSHA 1910.140
This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.
OSHA 1926.502
This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.
ISO 17025 lab tested
Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.
Typical Applications
Installation Overview
Installation must follow the Guardian instruction manual for this anchor. The sequence below is an overview only.
- Inspect first. Check the anchor body, connection point, and hardware before every installation.
- Verify the structure. The supporting structure must meet the strength requirements in the instruction manual.
- Install per the manual. Follow the substrate, fastener, and orientation requirements exactly; fill every required fastener position.
- Verify the connection. Confirm the anchor is fully seated and the connection point is accessible and undamaged.
- Connect the system. Attach a compatible connecting device and verify the complete personal fall arrest system with a competent person.
- Check clearance. Confirm fall clearance below the work area and minimize swing fall hazards before work begins.
Inspection and Retirement
Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the anchor from service for any of the conditions below.
- Cracks, corrosion, or deformation of the body, connection point, or welds.
- Loose, missing, damaged, or worn hardware and fasteners.
- Elongation or wear at the D-ring or connection eye.
- Missing or illegible labels.
- Any evidence the anchor has arrested a fall.
Retirement triggers: any fall event on the anchor, or any condition where the inspector cannot positively verify it is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian 10808 Ladder Stability Anchor with Straps Submittals and Documentation
Guardian 10808 Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Compatible and Related Products
- Guardian External Shock Absorbing Lanyard 2-Pack. Connecting devices for anchored workers.
- Guardian 10900 Halo 11 ft Web SRL. Short-clearance SRL for overhead anchorage.
- Guardian 00455 Temper Roof Anchor 4-Pack. Reusable residential roof anchors.
Specifying Anchors for Your Jobsite?
Substrate, structure, and system layout decide the right anchor. Confirm your application with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
