Rapid Deployment Rescue Ladder Kit, 20 ft
The Guardian 15046 answers the minutes after an arrest: a 20 ft rescue ladder that deploys from its kit to reach a suspended worker, converting the rescue plan from a radio call into a climbable path. Suspension trauma sets its own clock; the ladder beats it.
A component of rescue planning per OSHA 1926.502(d)(20), deployed per the kit manual.
Who Needs This Product
Prompt rescue is the requirement everyone signs and few equip: a suspended worker has minutes of safe hang time, and aerial equipment is never where the fall is. The 20 ft kit lives on site, deploys from the anchorage above the casualty, and gives the worker or the rescuer a ladder instead of a wait.
Features
Aluminum Ladder
Aluminum Ladder
Two 3' Premium Cross Arm Straps with Large & Sta
Two 3' Premium Cross Arm Straps with Large & Standard D-rings (10785)
Two 3,600 lbs. rated Pompier Hooks (01850)
Two 3,600 lbs. rated Pompier Hooks (01850)
Weather grade carrying pack & storage container
Weather grade carrying pack & storage container
Jobsite-grade construction
Built with the materials and finish quality Guardian applies across its height safety line.
Documented compliance
Full manufacturer documentation is linked on this page for submittal packages.
Technical Specifications
| SKU | 15046 |
|---|---|
| Worker capacity | 130-420 lbs. including all clothing, tools, and equipment |
| Tensile strength | 5,000 lbs. |
| Materials | Aluminum, galvanized steel, zinc-plated steel, polyester, and nylon. |
| Product weight | 30 lbs |
| Dimensions | 0 in L x 0 in W x 0 in H |
| Standards | OSHA 1910.140, OSHA 1926.502 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Components work only inside a verified system. This product must be used with compatible equipment per the manufacturer documentation, and the complete fall protection system must be verified by a competent person before use.
Compliance Standards
OSHA 1910.140
This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.
OSHA 1926.502
This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.
ISO 17025 lab tested
Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.
Typical Applications
Use Overview
Use must follow the Guardian product documentation. The sequence below is an overview only.
- Inspect first. Check the product for damage, wear, and legible markings before every use.
- Verify compatibility. Confirm compatibility with the connecting equipment per the instruction documentation.
- Install or connect. Attach per the manufacturer documentation, with gates and closures fully engaged where applicable.
- Function check. Verify the product operates as intended before loading it.
- Use within ratings. Stay within the rated capacity and application limits at all times.
- Reinspect after use. Check again when the product returns to the gang box; remove damaged items from service.
Inspection and Retirement
Inspect before every use. Remove the product from service for any of the conditions below.
- Cracks, corrosion, deformation, or excessive wear.
- Gates, closures, or moving parts that do not operate positively.
- Cut, frayed, or abraded webbing or stitching (webbing products).
- Missing or illegible markings.
- Any evidence of involvement in a fall event.
Retirement triggers: any fall event, any failed inspection item, or any condition where the inspector cannot positively verify the product is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian 15046 Rapid Deployment Rescue Ladder Kit 20 ft Submittals and Documentation
Guardian Rapid Deployment Rescue Ladder Kit Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Compatible and Related Products
- Guardian 00455 Temper Roof Anchor 4-Pack. Reusable residential roof anchors.
- Guardian Series 3 Harness. The padded general construction harness line.
- Guardian External Shock Absorbing Lanyard 2-Pack. Connecting devices for anchored workers.
Completing Your Fall Protection System?
Compatibility across components makes or breaks the system. Confirm your combination with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
