CR3 Class 1 Single Cable SRL, 33 ft Galvanized
The Guardian CR3 is the big-radius overhead retractable: 33 ft of galvanized cable in a housing built for fixed anchorage above the work, covering an entire work zone from one anchor point with a snap hook termination.
Certified to ANSI Z359.14-2021 Class 1 and compliant with OSHA 1926.502 and 1910.140.
Who Needs This Product
Where the Velocity line rides on the worker, the CR3 hangs on the structure: mounted overhead on a beam anchor or fixed point, its 33 ft of cable follows the worker across the zone below. Plants, hangars, and loading areas standardize on exactly this format for recurring work under good overhead steel.
Features
Compact and lightweight design for easy transpor
Compact and lightweight design for easy transport around the jobsite
Swivel top connection point helps reduce lifelin
Swivel top connection point helps reduce lifeline snagging or tangling
Fall-indicating snap hook makes it easy to see i
Fall-indicating snap hook makes it easy to see if unit has been exposed to excessive force during inspection
Digitally enabled QR code on the housing label f
Digitally enabled QR code on the housing label for easy access to manuals, labels, and product specifications.
Ergonomic carrying handle for easier transport a
Ergonomic carrying handle for easier transport around the job
Carabiner included
Carabiner included
Technical Specifications
| SKU | 4200220 |
|---|---|
| Product weight | 16.2 lbs |
| Dimensions | 14 in L x 12 in W x 5 in H |
| Standards | ANSI Z359.14-2021, OSHA 1910.140, OSHA 1926.502 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Class rating decides the anchor location. Class 1 SRLs anchor at or above the dorsal D-ring only; Class 2 SRLs are additionally rated for at-foot anchorage and leading edge exposure per ANSI Z359.14-2021. Check the fall clearance chart on the device label for your anchor height before work begins.
Compliance Standards
ANSI Z359.14-2021
This product is compliant with ANSI Z359.14-2021 when used as part of a complete, competent-person verified system.
OSHA 1910.140
This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.
OSHA 1926.502
This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.
ISO 17025 lab tested
Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.
Typical Applications
Use Overview
Use must follow the Guardian SRL instruction manual. The sequence below is an overview only.
- Inspect first. Check the housing, lifeline, load indicator, and hooks before every use.
- Test retraction. Pull the line and let it retract under control; confirm smooth payout and positive lock when jerked sharply.
- Anchor per class. Class 1 devices anchor at or above the dorsal D-ring; Class 2 devices may anchor at foot level per the manual.
- Connect the worker. Attach the lifeline hook to the harness per the manual and confirm the gate locks.
- Check clearance. Verify fall clearance using the chart on the label for your anchor height.
- Work in line. Stay in line with the anchor to minimize swing fall exposure.
Inspection and Retirement
Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the SRL from service for any of the conditions below.
- Lifeline: cuts, fraying, kinks, broken wires, or contamination along the full working length.
- Retraction: hesitation, slack line, or failure to lock under a sharp pull.
- Load indicator: any deployment showing.
- Housing and swivel: cracks, deformation, corrosion, or binding.
- Hooks: cracks, deformation, or gates that do not close and lock automatically.
Retirement triggers: any fall arrest event, a showing load indicator, retraction or locking failure, or any condition where the inspector cannot positively verify the device is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian 4200220 CR3 Class 1 Cable SRL 33 ft Submittals and Documentation
Guardian Cr3 Srl Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Guardian Cr3 Srl Tds (PDF)Dimensions, materials, capacities, and the full compliance summary.Guardian Cr3 Srl Test Report (PDF)ISO 17025 accredited laboratory test results.Guardian Cr3 Srl Doc Of Conformity (PDF)Manufacturer declaration of conformity.Compatible and Related Products
- Guardian 10900 Halo 11 ft Web SRL. The compact web SRL for overhead anchorage.
- Guardian 00101 Beamer 2000 Beam Anchor. Pivoting beam anchorage for these SRLs.
- Guardian 10733 Suspension Trauma Strap 4-Pack. Post-fall relief for every harness on the crew.
Choosing the Right SRL Class and Length?
Anchor height, edge exposure, and clearance decide the device. Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
