Cyclone Construction Harness, Pass-Through Chest, Tongue-Buckle Legs
The Guardian Cyclone is the premium construction harness above the Series 3: contoured black and yellow webbing, upgraded padding, and hardware built for the ten-hour structural day. This configuration pairs a pass-through chest buckle with tongue-buckle legs in M-L (21053) and XL (21054).
Certified to ANSI Z359.11 and compliant with OSHA 1910.140 and 1926.502 at the capacities in the manual.
Guardian Harness Sizing Chart
Height (ft) by Weight (lb)
Blocks overlap by design: in an overlap, either size fits. Approximate bands: Small 100 to 160 lb and 5 ft to 6 ft. M-L 130 to 240 lb and 5 ft to 6 ft 2 in. XL 180 to 300 lb and 5 ft 2 in to 6 ft 4 in. 2XL 240 to 360 lb and 5 ft 4 in to 6 ft 6 in. 3XL 300 to 420 lb and 5 ft 6 in to 6 ft 8 in. Guardian harnesses sold as Universal or S-L span the Small and M-L bands, and XL-XXL spans the XL and 2XL bands. Based on the manufacturer's published Guardian sizing chart; verify fit per the instruction manual before first use.
Who Needs This Product
The Cyclone line is where comfort features stop being options: sculpted padding, ergonomic strap routing, and hardware that survives structural trades. This entry configuration keeps the familiar pass-through chest and belt-style legs that field crews adjust without thinking.
Features
Lightweight and breathable shoulder padding for
Lightweight and breathable shoulder padding for all-day comfort
Supportive Waist Pad w/ Belt option available fo
Supportive Waist Pad w/ Belt option available for comfort and support while working
Durable label cover protects important safety in
Durable label cover protects important safety information
Dual lanyard keepers to safely park lanyard legs
Dual lanyard keepers to safely park lanyard legs when not in use
Quick-Connect Chest buckle option available for
Quick-Connect Chest buckle option available for fast and easy harness donning
Spring-Loaded Torso Adjustment for a quick and t
Spring-Loaded Torso Adjustment for a quick and tailored fit
Options in This Family
| SKU | Description |
|---|---|
| 21053 | Guardian Cyclone Harness, PT Chest, TB Legs, M-L |
| 21054 | Guardian Cyclone Harness, PT Chest, TB Legs, XL |
Technical Specifications
| SKU | 21053 / 21054 |
|---|---|
| Worker capacity | 130-420 lbs. including all clothing, tools, and equipment |
| Tensile strength | 5,000 lbs. |
| Materials | Polyester, nylon and galvanized steel |
| Product weight | 4.7 lbs |
| Dimensions | 0 in L x 0 in W x 0 in H |
| Standards | OSHA 1910.140, OSHA 1926.502, ANSI Z359.11-2014 |
| Warranty | Guardian lifetime warranty against defects in material and workmanship |
Fit before the first step up. Adjust the harness so the dorsal D-ring sits between the shoulder blades, the chest strap crosses mid-chest, and leg straps allow a flat hand but not a fist. Retire any harness that has arrested a fall.
Compliance Standards
OSHA 1910.140
This product is compliant with OSHA 1910.140 when used as part of a complete, competent-person verified system.
OSHA 1926.502
This product is compliant with OSHA 1926.502 when used as part of a complete, competent-person verified system.
ANSI Z359.11-2014
This product is compliant with ANSI Z359.11-2014 when used as part of a complete, competent-person verified system.
ISO 17025 lab tested
Guardian products are tested in an ISO 17025 accredited laboratory; available documentation is linked below.
Typical Applications
Donning Overview
Donning must follow the Guardian instruction manual for this harness. The sequence below is an overview only.
- Inspect first. Check webbing, stitching, D-rings, and buckles before every use.
- Shake out and orient. Hold by the dorsal D-ring; straps fall into place without twists.
- Arms through. Put the harness on like a jacket, shoulder straps over both shoulders.
- Buckle the chest. Connect the chest buckle at mid-chest height.
- Buckle the legs. Connect each leg strap; snug so a flat hand fits but a fist does not.
- Adjust and check. Set all adjustment points and confirm the dorsal D-ring sits between the shoulder blades.
Inspection and Retirement
Inspect before every use, and have a competent person perform a documented inspection at least every six months under ANSI Z359.2 practice. Remove the harness from service for any of the conditions below.
- Webbing: cuts, fraying, abrasion, burns, or chemical damage.
- Stitching: broken, pulled, or abraded threads at load-bearing junctions.
- Hardware: cracks, corrosion, or deformation of D-rings and buckles.
- Impact indicators: any deployment (models so equipped).
- Labels: missing or illegible.
Retirement triggers: any fall arrest event, a deployed impact indicator, or any condition where the inspector cannot positively verify the harness is fit for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Guardian Cyclone Harness, PT Chest, TB Legs Submittals and Documentation
Guardian Cyclone Harness Manual (PDF)Installation, use rules, and inspection criteria from the manufacturer.Guardian Cyclone Harness Test Report (PDF)ISO 17025 accredited laboratory test results.Guardian Cyclone Harness Doc Of Conformity (PDF)Manufacturer declaration of conformity.Guardian Construction Tux Harness Inspection Form (PDF)Printable competent-person inspection checklist.Compatible and Related Products
- Guardian Series 3 Harness. The padded general construction line.
- Guardian 10733 Suspension Trauma Strap 4-Pack. Post-fall relief for every harness.
- Guardian CR5 Class 1 Web SRL. Personal SRL to pair with these harnesses.
Outfitting a Crew with Harnesses?
Sizing, buckle styles, and duty level decide the right model. Confirm your crew with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Guardian Fall Protection Manufacturer Warranty
Guardian warrants to the purchaser that all products are free from defects in material, workmanship, and design (when the design is Guardian's responsibility). This warranty does not cover conditions resulting from normal wear and tear, neglect, abuse, accident, or otherwise. Guardian's obligations under this warranty apply for the lifetime of the product and are limited to the replacement of the product only.
This warranty is not transferable and does not apply to product that is resold after having been put into service. The warranty is void if the product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. No other person, firm, or entity is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian products. There are no implied warranties of merchantability or fitness for a particular purpose.
Source: Guardian Standard Terms and Conditions of Sale, Doc. 102 v3.0. Contact Guardian customer service at +1 (800) 466-6385 or through guardianfall.com for warranty claims and product support.
