Malta Dynamics APEX full brim face shield bracket in blue nylon with LeverLock attachment and press-to-release slotted cap adapters for APEX Type 2 full brim safety helmets
Malta Dynamics

Malta Dynamics APEX Full Brim Face Shield Bracket (2-Pack)

(No reviews yet) Write a Review
$119.98
Brand:
Malta Dynamics
SKU:
HTV0007-2PK
Availability:
Usually ships within 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
Malta Dynamics Head Protection

APEX Full Brim Face Shield Bracket (2-Pack)

This weight-compensating face shield bracket is built for the Malta Dynamics APEX Type 2 Full Brim Safety Helmet. The weight-compensating design centers the face shield when stowed, so the visor sits balanced and out of the way rather than pulling the helmet forward. The LeverLock attachment system swaps face shield windows fast and tool-free, while press-to-release slotted cap adapters let the whole bracket come off in seconds.

The blue nylon bracket meets ANSI Z87.1 and ships in a two-pack, so a crew can outfit multiple APEX helmets at once. It carries Malta Dynamics toric face shield windows - a clear high-temp and impact window or a Shade 5 green nanoparticle welding and cutting window - both with the LeverLock hole pattern.

Malta Dynamics weight-compensating face shield bracket in blue nylon with LeverLock attachment for APEX Type 2 full brim safety helmets
2-PackBrackets per Order
Z87.1ANSI Standard
LeverLockTool-Free Window Swap
Weight-CompBalanced When Stowed
APEXType 2 Full Brim Fit
NylonBlue Bracket
0.2 lbPer Bracket
Slotted CapPress-to-Release

Who Needs This Product

This bracket is for crews running the Malta Dynamics APEX Type 2 Full Brim Safety Helmet who need a face shield carrier - either as the original bracket for a new toric window setup or as a replacement for a worn bracket. It is the mounting hardware only; the toric face shield window is purchased separately. The two-pack outfits multiple helmets in one order. Workers must still wear ANSI Z87.1-approved safety glasses or goggles under the face shield for primary eye protection.

Features

Weight-compensating design

Centers the face shield in the stowed position for a compact, balanced assembly that does not pull the helmet forward.

LeverLock attachment

The LeverLock system swaps toric face shield windows quickly and tool-free, so crews change from clear to welding shade in the field.

Press-to-release adapters

Slotted cap adapters press to release, so the bracket comes off the APEX helmet in seconds without tools.

APEX full brim fit

Designed for seamless integration with the Malta Dynamics APEX Type 2 Full Brim Safety Helmet slotted cap.

Toric window ready

Carries clear high-temp and impact windows or Shade 5 green welding and cutting windows, both with the LeverLock hole pattern.

Two-pack value

Ships as two brackets so a crew can equip more than one APEX helmet from a single order.

Technical Specifications

Product Weight-compensating face shield bracket for APEX Type 2 Full Brim Safety Helmets
Pack quantity 2 brackets per order
Bracket type Weight-compensating slotted cap bracket
Attachment LeverLock tool-free window replacement; press-to-release slotted cap adapters
Material Nylon
Color Blue
Weight 0.2 lb per bracket
Helmet compatibility Malta Dynamics APEX Type 2 Full Brim Safety Helmet (slotted cap)
Window compatibility Malta Dynamics clear high-temp and impact toric window; Shade 5 green nanoparticle welding and cutting toric window (LeverLock hole pattern; sold separately). Also compatible with Paulson weight-compensating brackets for slotted cap helmets.
Standard ANSI Z87.1
Required eye protection ANSI Z87.1-approved safety glasses or goggles worn under the face shield
Warranty 1 year limited (Malta Dynamics) against factory defects in workmanship and materials
⚠

The bracket is the carrier, not the shield. This product is the mounting bracket only - the toric face shield window is sold separately. A face shield is also secondary protection: always wear ANSI Z87.1-approved safety glasses or goggles under the visor. Confirm your helmet is a Malta Dynamics APEX Type 2 Full Brim slotted cap helmet before ordering.

Compliance Standards

ANSI Z87.1

Occupational eye and face protection. The bracket is rated to ANSI Z87.1 as part of the APEX face shield assembly.

OSHA 29 CFR 1926.100

Construction head protection requirements for workers exposed to impact and splash hazards.

OSHA 29 CFR 1910.135

General industry head protection requirements for protective helmets.

APEX helmet system

Built for the Malta Dynamics APEX Type 2 Full Brim Safety Helmet so the bracket, helmet, and visor work as one assembly.

Typical Applications

Welding and cuttingCarry a Shade 5 toric window for gas welding and cutting.
High-temp workHold a clear high-temp and impact window near heat sources.
GrindingFace protection from sparks and debris over the APEX helmet.
Bracket replacementSwap a worn bracket on an existing APEX helmet.
Fleet outfittingEquip two APEX helmets from one two-pack order.
Foundries and metalPair with toric windows for hot metal work.
MaintenanceFlip-down face protection for repair and service tasks.
General industryAdd a toric face shield to a Type 2 full brim helmet.

Setup Overview

Install per the Malta Dynamics instructions. The sequence below is an overview only.

  1. Confirm the helmet. Verify the helmet is a Malta Dynamics APEX Type 2 Full Brim slotted cap helmet.
  2. Mount the bracket. Seat the slotted cap adapters into the helmet until they lock.
  3. Install the window. Snap a Malta Dynamics toric face shield window into the LeverLock pattern - clear or Shade 5 green.
  4. Wear eye protection. Put on ANSI Z87.1-approved safety glasses or goggles under the face shield.
  5. Check the balance. Stow the shield and confirm the weight-compensating bracket centers it.
  6. Remove when needed. Press the slotted cap adapters to release the bracket without tools.

Inspection and Care

Inspect the bracket and window before each use. Remove from service for any of the conditions below.

  • Bracket: cracks, broken LeverLock tabs, or slotted cap adapters that no longer lock.
  • Pivot: a stow position that no longer holds the shield balanced and clear.
  • Window: cracks, deep scratches, crazing, or heat distortion that blocks vision.
  • Helmet: any APEX helmet damage - replace the helmet per its own inspection schedule.

Clean with mild soap and water. Avoid solvents that can craze the window. Store away from direct heat and sunlight.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Frequently Asked Questions

What helmet does this bracket fit?
It is designed for the Malta Dynamics APEX Type 2 Full Brim Safety Helmet. The press-to-release slotted cap adapters seat into the APEX helmet, and the weight-compensating bracket centers the toric face shield when stowed. Confirm your helmet is the APEX Type 2 Full Brim slotted cap model before ordering.
Does this include the face shield window?
No. This product is the mounting bracket only. The toric face shield windows - clear high-temp and impact, or Shade 5 green for welding and cutting - are sold separately. Both windows use the LeverLock hole pattern and snap into this bracket tool-free.
How many brackets come in the pack?
This is a two-pack: two weight-compensating brackets per order, so a crew can outfit two APEX helmets or keep a spare on hand. Each bracket is blue nylon and weighs about 0.2 lb.
What is the weight-compensating design for?
The weight-compensating bracket centers the face shield in the stowed position. That keeps the assembly compact and balanced so the visor does not pull the helmet forward or off-center when it is lifted out of the way.
How does the LeverLock system work?
LeverLock is a tool-free attachment that lets you swap toric face shield windows in the field. A worker can change from a clear window to a Shade 5 welding window without tools, then press the slotted cap adapters to pull the whole bracket off the helmet.
Does the face shield replace safety glasses?
No. The face shield is secondary protection. Workers must wear ANSI Z87.1-approved safety glasses or goggles under the shield for primary eye protection. The toric window adds face and lower-face coverage on top of that.
Is this bracket compatible with other brands?
The bracket is built for the Malta Dynamics APEX slotted cap helmet, and the windows are also compatible with Paulson weight-compensating brackets for slotted cap helmets. For a guaranteed fit and a Z87.1 assembly, pair it with a Malta Dynamics APEX helmet and toric window.

Malta Dynamics APEX Face Shield Bracket Submittals and Documentation

Weight-Compensating Bracket Spec Sheet (PDF)Model, bracket type, material, weight, ANSI Z87.1 rating, and APEX compatibility.

Compatible and Related Products

Specifying Head and Face Protection for Your Crew?

Need help matching APEX helmets, brackets, and toric windows for your jobsite? Tell us your helmets and hazards, and we will build the full head-and-face protection kit so the right parts ship together.

Call 863-703-4522 to talk to a fall protection specialist.

Equipment offered by Malta Dynamics is warranted against factory defects in workmanship and materials for a period of one (1) year from date of installation or first use by the original owner. Upon written notice, Malta Dynamics will repair or replace defective items at its sole discretion. This warranty does not cover damage from wear, abuse, transit, or failure to maintain the product, and applies only to the original purchaser.
0 Reviews Hide Reviews Show Reviews

About Malta Dynamics

Established by Damian Lang, Malta Dynamics provides cutting-edge fall protection solutions for diverse industries. Initially a laborer mixing and carrying mortar to bricklayers on masonry job sites, Damian started his own masonry company in Ohio in 1984. As it grew, he needed better solutions to protect his workers. Safety training and equipping his team with the best equipment became a top priority in the company's early years. Eventually, Malta Dynamics was born from this focus on safety. With over three decades of hands-on experience in construction, aviation, manufacturing, warehousing, masonry, and more, Malta Dynamics designs, engineers, and manufactures an extensive line of fall protection and safety equipment tailored to meet the unique demands of each field. Malta Dynamics products meet OSHA requirements and incorporate innovative features attributed to industry feedback. With a steadfast commitment to safety and a wealth of hands-on expertise, Malta Dynamics delivers fall protection solutions engineered to safeguard workers in even the most demanding environments.

Related Products

!