Close-up of the Malta Dynamics C5004 lanyard self-locking steel snap hook with 3,600 lb gate
Malta Dynamics

Malta Dynamics C5004 6 ft Internal Shock-Absorbing Lanyard with 2 Snap Hooks (3-Pack)

(No reviews yet) Write a Review
$99.00
Brand:
Malta Dynamics
SKU:
C5004-3PK
Availability:
Usually ships within 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
Malta Dynamics Shock-Absorbing Lanyards

C5004 6 ft Single-Leg Internal Shock-Absorbing Lanyard with 2 Steel Snap Hooks

The Malta Dynamics C5004 is a fixed 6 foot single-leg energy-absorbing lanyard that connects a worker's full body harness to an anchorage in a personal fall arrest system. The shock absorption is built directly into the lanyard rather than housed in a separate pack, which makes this the lightest version in the line while still limiting the maximum arresting force to 900 pounds or less.

It is built from one-inch polyester webbing and finished with two 3,600 lb gate steel snap hooks tested to ANSI standards. The C5004 meets ANSI Z359.13-2009 and is third-party tested under ISO 17025 per the ANSI testing protocols. This listing ships as a bulk pack so a crew is outfitted from one line item.

Malta Dynamics C5004 6 ft single-leg internal shock-absorbing lanyard with two steel snap hooks, 900 lb maximum arresting force, ANSI Z359.13 compliant
6 ftFixed Length
900 lbsMax Arresting Force
130-310 lbsWorker Capacity
2Steel Snap Hooks
InternalShock Absorber
3,600 lbsConnector Gate
Z359.13ANSI Standard
Single LegConfiguration

Who Needs This Product

The C5004 is the connecting device in a personal fall arrest system, with the shock absorber built into the webbing for the lightest single-leg option in the line. It is a straightforward fixed 6 foot lanyard for general arrest applications on construction and industrial sites. Each connected worker also needs an ANSI full body harness and an anchorage rated for the load. Because it is a single-leg lanyard, the worker is unprotected during repositioning; for 100 percent tie-off use a double-leg lanyard instead.

Features

Built-in shock absorption

The energy absorber is integrated into the webbing, making this the lightest single-leg lanyard in the line while limiting arresting force to 900 pounds or less.

Two steel snap hooks

Self-locking alloy steel snap hooks on both ends with 3,600 lb gate strength connect to the harness and anchorage.

Fixed 6 ft length

A standard 6 foot working length for general fall arrest applications under OSHA Subpart M.

One-inch polyester webbing

Durable polyester web stands up to jobsite wear and is easy to inspect.

ANSI tested connectors

The 3,600 lb gate snap hooks are tested to ANSI requirements for side and front loading.

Bulk pack for crews

Ships as a multi-unit pack so a whole crew is equipped from one line item.

Technical Specifications

Base SKU C5004
Type Single-leg internal shock-absorbing lanyard
Connectors 2 self-locking steel snap hooks
Length 6 ft fixed
Maximum arresting force 900 lb or less
Maximum free fall 6 ft (per the user manual)
Worker capacity 130 to 310 lb, including tools and equipment
Webbing 1 in polyester
Connector gate strength 3,600 lb side and front load
Unit weight 2.6 lb
Compliance ANSI Z359.13-2009; OSHA 1926 Subpart M; OSHA 1910
Testing Third-party tested under ISO 17025 accreditation per the ANSI testing protocols
Warranty 1 year limited (Malta Dynamics) against factory defects in workmanship and materials
⚠

A single-leg lanyard does not provide 100 percent tie-off. The worker is unprotected while disconnecting and reconnecting. Verify fall clearance below the work surface before each use, keep free fall within 6 feet, confirm the anchorage is rated for the load, and retire the lanyard immediately after any fall-arrest event or if the shock absorber shows any sign of deployment.

Compliance Standards

ANSI Z359.13-2009

ANSI/ASSP standard for energy-absorbing lanyards and shock-absorbing connecting devices.

ISO 17025

Third-party laboratory testing performed under ISO 17025 accreditation per the ANSI protocols.

OSHA 29 CFR 1926 Subpart M

Construction fall protection, including personal fall arrest requirements under 1926.502.

OSHA 29 CFR 1910

General industry personal fall protection for walking-working surfaces.

Typical Applications

General fall arrestStandard 6 ft tie-off for construction and industrial work.
Roofing crewsTie-off to a rated roof anchor on steep or low-slope roofs.
Steel and structuralConnecting to overhead or dorsal-level anchorage points.
Industrial maintenancePlatform and elevated work in general industry.
Aerial liftsTie-off inside boom and scissor lifts where required.
Tower and utilityShort-range arrest where a single leg is sufficient.
Lightweight kitsThe lightest single-leg option for compliance kits.
Fleet outfittingBulk pack equips a full crew from one purchase.

Use Overview

Use per the Malta Dynamics lanyard user instruction manual. The sequence below is an overview only.

  1. Inspect. Check the webbing, stitching, shock absorber, and all connectors before each use.
  2. Verify the harness. Wear an ANSI-compliant full body harness, fitted and adjusted, with the dorsal D-ring centered between the shoulder blades.
  3. Verify the anchorage. Confirm the anchorage is rated for the personal fall arrest load and located to keep free fall within 6 feet.
  4. Calculate clearance. Add free fall, deceleration distance, harness stretch, and a safety margin, and confirm sufficient fall clearance below the work surface.
  5. Connect. Clip one snap hook to the dorsal D-ring and the other to the anchorage, confirming each gate is fully closed and locked.
  6. Minimize swing falls. Keep the anchorage as directly overhead as possible to reduce pendulum swing.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least every six months or per your program. Remove the lanyard from service for any of the conditions below.

  • Webbing: cuts, frays, abrasion, burns, chemical damage, or broken fibers.
  • Stitching: pulled, cut, or broken threads anywhere on the assembly.
  • Shock absorber: any sign of activation, deployment, or the warning label being exposed.
  • Hooks: cracks, deformation, corrosion, or a gate that does not close and lock.
  • Labels: must remain legible and intact.

Retirement triggers: any fall-arrest event, any sign the shock absorber has deployed, or any defect listed above. A lanyard exposed to a fall must be removed from service permanently.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Frequently Asked Questions

What is the Malta Dynamics C5004 lanyard used for?
The C5004 is a fixed 6 foot single-leg energy-absorbing lanyard, the connecting device in a personal fall arrest system. It links a worker's full body harness dorsal D-ring to a rated anchorage and absorbs energy during a fall to keep the maximum arresting force at 900 pounds or less.
What is the difference between an internal and external shock absorber?
An internal shock absorber is built into the lanyard webbing, which makes the C5004 lighter and lower profile. An external shock absorber, like the one on the C5000, is a visible pack you can inspect at a glance. Both limit the maximum arresting force to 900 pounds or less.
What is the maximum arresting force and worker capacity?
The internal shock absorber limits the maximum arresting force to 900 pounds or less, within the OSHA 1,800 pound limit for a body harness. The worker capacity range is 130 to 310 pounds including tools and equipment.
Does a single-leg lanyard provide 100 percent tie-off?
No. With a single-leg lanyard the worker is unprotected while disconnecting and reconnecting. For continuous 100 percent tie-off while repositioning, use a double-leg lanyard such as the Malta Dynamics C5106.
Which standards does the C5004 meet?
Per the spec sheet, the C5004 meets ANSI Z359.13-2009 and is compliant with OSHA 1926 Subpart M and OSHA 1910. It is 100 percent third-party tested under ISO 17025 accreditation per the ANSI testing protocols.
How much fall clearance does the C5004 require?
Required clearance is the sum of free fall distance, the shock absorber deceleration distance, harness stretch, the height of the worker, and a safety margin. Free fall must not exceed 6 feet. Always calculate total clearance below the work surface before tying off, and use the Fall Protection Calculator below.
What else do I need to build a complete fall protection system?
The C5004 is the connecting device only. Each worker also needs an ANSI full body harness and a rated anchorage. Size the lanyard free fall and deceleration distance to the fall clearance available below the work surface, and use the Fall Protection Calculator below to plan the system.

Malta Dynamics C5004 Submittals and Documentation

C5004 Spec Sheet (PDF)Connectors, capacity, webbing, weight, and compliance summary. Lanyard User Instruction Manual (PDF)Use, fall clearance, free fall limits, inspection, and warranty. C5004 Declaration of Conformity (PDF)Conformity statement with ISO 17025 third-party test verification. Lanyard Inspection Form (PDF)Competent-person inspection checklist for your records.

Compatible and Related Products

Specifying Lanyards for Your Crew?

Need help matching the right lanyard, harness, and anchorage to your jobsite? Confirm your anchorage, free fall, and fall clearance with us and we will walk through the full kit list so the right equipment ships together.

Call 863-703-4522 to talk to a fall protection specialist.

Equipment offered by Malta Dynamics is warranted against factory defects in workmanship and materials for a period of one (1) year from date of installation or first use by the original owner. Upon written notice, Malta Dynamics will repair or replace defective items at its sole discretion. This warranty does not cover damage from wear, abuse, transit, or failure to maintain the product, and applies only to the original purchaser.
0 Reviews Hide Reviews Show Reviews

About Malta Dynamics

Established by Damian Lang, Malta Dynamics provides cutting-edge fall protection solutions for diverse industries. Initially a laborer mixing and carrying mortar to bricklayers on masonry job sites, Damian started his own masonry company in Ohio in 1984. As it grew, he needed better solutions to protect his workers. Safety training and equipping his team with the best equipment became a top priority in the company's early years. Eventually, Malta Dynamics was born from this focus on safety. With over three decades of hands-on experience in construction, aviation, manufacturing, warehousing, masonry, and more, Malta Dynamics designs, engineers, and manufactures an extensive line of fall protection and safety equipment tailored to meet the unique demands of each field. Malta Dynamics products meet OSHA requirements and incorporate innovative features attributed to industry feedback. With a steadfast commitment to safety and a wealth of hands-on expertise, Malta Dynamics delivers fall protection solutions engineered to safeguard workers in even the most demanding environments.

Related Products

!