Titan+ Self-Retracting Lifeline with Galvanized Cable
The Titan+ brings the PLUS family to the value end of the line: a rugged galvanized cable SRL in a high-impact nylon housing, built for overhead applications at the most cost-effective price Miller puts on a full-size unit.
Rated to 420 lb per OSHA and meeting OSHA and ANSI standards, with UV-resistant scratch-proof labeling that keeps inspections legible.
Who Needs This Product
The Titan+ is for budgets that need a compliant full-size cable SRL on every anchor without premium-line pricing: rental fleets, multi-anchor sites, and contractors outfitting several overhead stations at once. It gives up the corrosion-proof internals and side payout of the Falcon+, not the certification.
Features
Most Cost-Effective Full-Size
The lowest-cost cable SRL in the Miller range that still carries the full 420 lb OSHA rating.
Rugged Overhead Design
Built to mount above the work and take the knocks of a working anchor point.
High-Impact Nylon Housing
The housing shrugs off drops and drags that crack lesser shells.
UV-Resistant Labeling
Scratch-resistant graphics keep capacity and inspection data legible outdoors.
Steel Carabiner Mount
The included carabiner hangs the unit from the anchor in seconds.
Swivel Snap Hook
The swivel hook keeps the cable running true as the worker moves.
Technical Specifications
| SKU | MTS-OGC1-02 family |
|---|---|
| Product | Titan+ Self-Retracting Lifeline |
| Stocked lengths | 30, 50 ft |
| Lifeline | Galvanized steel cable |
| Connectors | Steel carabiner; steel swivel snap hook |
| Housing | High-impact resistant nylon |
| Capacity | 420 lb per OSHA including all clothing, tools, and equipment |
| Packaging | Boxed |
| Standards | OSHA 1926.502; ANSI Z359.14 |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
Sizes and Ordering Information
| Length | SKU | UPC |
|---|---|---|
| 30 ft | MTS-OGC1-02/30FT | 612230303563 |
| 50 ft | MTS-OGC1-02/50FT | 612230303570 |
All stocked lengths are selectable from the options above. Other lengths are made by the vendor; contact us for availability.
Overhead anchor, taut line. Mount the Titan+ above the work, keep the cable clear of edges, and check the unit before every use. Remove it from service after any arrest.
Compliance Standards
ANSI Z359.14
Certified as a self-retracting lifeline for overhead anchorage applications.
OSHA 1926.502 and 1910.140
Meets OSHA connecting device requirements for personal fall arrest systems, rated to 420 lb per OSHA.
Titan Value Line
The Titan name is Miller's value tier: full certification with a simplified feature set.
UV-Resistant Marking
Labeling stays legible through outdoor service for reliable inspections.
Typical Applications
Setup Overview
- Inspect the housing, cable, load indicator, and connectors before use.
- Mount the unit to an overhead anchorage rated for fall arrest using the top swivel connector.
- Connect the lifeline snap hook to the harness dorsal D-ring and verify the gate locks.
- Check retraction and brake lock-up with a sharp pull before committing to the system.
- Verify fall clearance below the work level and keep the lifeline clear of edges not rated for contact.
Full use instructions and clearance tables ship with the unit.
Inspection and Retirement
Inspect the unit before each use, and have a competent person inspect it on a documented schedule per ANSI Z359.14 and the manual.
- Housing: cracks, distortion, loose fasteners, or a seized swivel.
- Cable: pay it out fully and check for kinks, birdcaging, broken wires, and corrosion.
- Load indicator and absorber: any deployment means immediate removal from service.
- Connectors: gates close and lock; no cracks, corrosion, or distortion.
- Retraction and brake: smooth retraction and a positive lock on a sharp pull.
Retirement triggers: any fall arrest event, deployed indicator or absorber, cable damage, or any failed inspection.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller MTS-OGC1-02 Submittals and Documentation
MTS-OGC1-02 Specification Sheet (PDF)Technical data, clearances, and SKU-level UPC information. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. MTS-OGC1-02 SRL Inspection Form (PDF)Printable pass/fail checklist for documented SRL inspections.Compatible and Related Products
- Miller TurboLite+ PFL, Carabiner and Snap Hook. The personal-size PFL for dorsal mounting.
- Miller TurboLite+ Edge PFL 9 ft, Snap Hook. The Class 2 personal unit for leading edge work.
- Miller T4500 Titan II Non-Stretch Harness. The harness under the SRL.
Sizing an SRL for Your Site?
Working length, edge exposure, and rescue needs decide the right unit. Confirm your conditions with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
