Tie Down PX3 Rescue Winch System with 100 ft Galvanized Lifeline
The PX3 Rescue Winch System turns the PX3 cart into a rescue station. It mounts to the cart and carries 100 ft of galvanized steel lifeline on a manual winch with a folding handle, so a rescuer can raise a fallen worker back to the roof or lower them to the ground without waiting on the fire department.
A swivel snap hook with an impact indicator connects to the fallen worker, and the whole system stores in its carry bag in the PX3 toolbox. Every PX3 that goes on a roof should have one, because OSHA requires a prompt rescue plan for every worker in fall arrest.
PayPal Pay Later availability and terms are set by PayPal at checkout. Ordering this with a machine or hoist kit? APPROVE business financing can cover the whole order; the sample payment is shown on that product page.
Who Needs This Product
Any crew working from a PX3 cart. OSHA 1926.502(d)(20) requires the employer to provide for prompt rescue of employees in the event of a fall, and a suspended worker can develop suspension trauma in minutes. The rescue winch gives the crew on the roof a way to raise or lower a fallen coworker immediately.
Features
100 ft of lifeline
Enough galvanized cable to lower a worker to grade from most low rise commercial roofs or raise them back to the deck.
Manual winch
Hand cranked with a folding handle, no power needed on the roof.
Impact indicator hook
The swivel snap hook shows when it has taken a fall load so it can be retired.
Mounts to the PX3
Designed to attach to the 72810 cart; the installation video below shows the mount.
Stores on the cart
Comes in a carry bag that fits the PX3 locking toolbox.
Completes the rescue plan
Pair it with a written rescue plan and trained rescuers who tie off to the remaining cart points.
Rescue equipment, not an anchor. The winch is for raising or lowering a fallen worker; it is not a fall arrest tie-off point. Rescuers tie off to the PX3 fall arrest and restraint points per the manual. Train the crew before the first shift and inspect the hook indicator after any load.
Compliance Standards
OSHA 29 CFR 1926.502(d)(20)
Employers shall provide for prompt rescue of employees in the event of a fall.
OSHA 29 CFR 1910.140
General industry personal fall protection systems.
Tie Down PX3 system
Designed and tested as part of the PX3 mobile fall protection system.
Rescue plan support
Documents a cart based assisted rescue method for your written plan.
Typical Applications
How to Use
Follow the Tie Down instruction manual. The sequence below is an overview only.
- Mount the winch. Attach to the PX3 per the Tie Down installation guide before work begins.
- Pay out the lifeline. Lower the swivel snap hook to the fallen worker and connect it to the harness.
- Transfer the load. Crank to take the worker's weight off the arresting device.
- Raise or lower. Bring the worker back to the deck or down to grade per the rescue plan.
- Retire after a fall. Check the impact indicator and remove loaded components from service.
Inspection and Retirement
Inspect before each use, with a documented competent person inspection at least annually. Remove the system from service for any of the conditions below.
- Lifeline: broken wires, kinks, corrosion, birdcaging.
- Winch and handle: a drum or brake that slips, a handle that will not fold or lock.
- Swivel snap hook: a tripped impact indicator, bent gate, gate that will not lock.
- Mount hardware: cracks, bends or missing pins.
- Bag and labels: missing or illegible labels.
Remove the system from service immediately after any fall arrest event and have it inspected by a competent person before it returns to use.
Product Videos
Mounting the 72819 winch on the PX3 cart.
The cart the winch is built for.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Part number | 72819 (Tie Down Engineering, USA) |
|---|---|
| Type | Manual rescue winch system for the PX3 mobile fall protection cart |
| Lifeline | 100 ft galvanized steel cable |
| Winch | Manual, folding handle |
| Connector | Swivel snap hook with impact indicator |
| Compatible with | Tie Down PX3 72810 |
| Weight | About 25 lb with bag |
| Storage | Carry bag included |
| Standards | OSHA 1926.502 rescue provisions |
| Warranty | Tie Down 90 day limited warranty |
Frequently Asked Questions
Tie Down 72819 Submittals and Documentation
PX3 Rescue Winch 72819 Sell Sheet (PDF)Features, lifeline length and compatibility. PX3 72810 Instruction Manual (PDF)Rescue and connection point rules for the PX3 cart. Tie Down Safety Catalog, Part 1 (PDF)Mobile fall protection, anchors and harness pages of the Tie Down safety catalog. Tie Down Safety Catalog, Part 2 (PDF)Guardrail, warning line and roofing safety pages of the Tie Down safety catalog.Compare the Tie Down Mobile Fall Protection Line
Every Tie Down cart is drop tested and ships job site ready. Pick by surface, crew size, and whether you need concrete capability, a rescue winch, or a lifeline between two carts.
- Tie Down Engineering. Mobile fall protection carts, rescue winches, ladder hoists and roofing equipment.
- Mobile fall protection systems. Every mobile anchor cart and grabber we carry.
Building a Rescue Plan Around the PX3?
We will help you pair the cart, winch and a written rescue plan, and quote the package delivered.
Call 863-703-4522 to talk to a fall protection specialist.
