Pulley Connector for SRL Rope and Cable
The CP105 keeps the lifeline running true: an industrial-grade pulley that guides SRL rope or cable up to 1/4 inch over the structure, cutting the friction and wear that eat lifelines rigged over hard edges.
Compatible with Miller DuraHoist systems and standard confined space rigging.
Who Needs This Product
Every redirect in a retrieval system is either a pulley or a wear point. The CP105 makes it a pulley: the sheave carries the line over the structure smoothly, protecting the cable, easing the winch load, and keeping retrieval forces predictable when they matter most.
Features
Smooth Sheave Action
The rolling sheave replaces sliding friction at line redirects.
Rope and Cable Rated
Guides SRL lines up to 1/4 inch diameter, wire or synthetic.
DuraHoist Integration
Drops into Miller DuraHoist confined space systems as a standard component.
Wear Protection
Extends lifeline service life by eliminating edge abrasion at the redirect.
Industrial Build
Metal construction sized for retrieval loads.
Simple Attachment
Connects to rigging points with standard carabiners.
Technical Specifications
| SKU | CP105 |
|---|---|
| Product | Pulley Connector |
| Line capacity | Rope or cable up to 1/4 in |
| Compatibility | Miller DuraHoist systems and standard rigging |
| Standards | Component of OSHA-compliant retrieval systems |
| Warranty | Miller Limited Lifetime Warranty against defects in workmanship and materials |
The anchor is only as good as the structure. Connect only to members that meet OSHA anchorage strength, position to minimize free fall and swing, and inspect before every use.
Compliance Standards
OSHA 1926.502 Anchorage
Anchorages for fall arrest must support 5,000 lb per worker attached, or maintain a safety factor of two under a qualified person.
ANSI Z359 Practice
Anchorage connectors follow ANSI Z359 component practice with 5,000 lb rated hardware.
ANSI Z359.2
Kept in service through pre-use checks and documented competent person inspections at least annually.
Typical Applications
Setup Overview
- Inspect the anchor and hardware before use.
- Select structure that meets OSHA anchorage strength for fall arrest.
- Install the anchor per the instructions for the structure type.
- Connect the lanyard or SRL and verify gates lock.
- Verify fall clearance and swing fall exposure before working.
Full installation instructions ship with the product.
Inspection and Retirement
Inspect before each use and have a competent person inspect at least annually per ANSI Z359.2.
- Webbing or body: cuts, frays, corrosion, cracks, distortion, or damage.
- D-rings and hooks: no cracks, corrosion, distortion; gates lock where fitted.
- Stitching and fasteners: intact and tight.
- Labels: present and legible.
Retirement triggers: any fall arrest loading, any defect found during inspection, or failure to verify fitness for service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
Miller CP105 Submittals and Documentation
CP105 Specification Sheet (PDF)Technical data, ratings, and SKU-level UPC information. Miller Fall Protection Catalog (PDF)The full Miller line: body wear, connecting devices, anchors, and rescue. CP105 Anchor Inspection Form (PDF)Printable pass/fail checklist for documented anchor inspections.Compatible and Related Products
- Miller MightEvac SRL Rescue Kit with 7 ft Tripod. The retrieval system this pulley serves.
- Miller 18D Steel Carabiner, 2 Inch Gate. The connector that hangs the pulley.
- Miller T4500 Titan II Non-Stretch Harness. The harness on the working end.
Anchoring Your Fall Protection System?
Structure type, strength, and position decide the right anchor. Confirm your conditions with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
Miller Limited Lifetime Warranty
Miller Fall Protection products are covered by the Miller Limited Lifetime Warranty. In the manufacturer's words: "We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous tests to ensure that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested to withstand normal wear and tear, but are not indestructible and can be damaged by misuse."
In the unlikely event that you should discover defects in either workmanship or materials, under the Limited Lifetime Warranty, Miller will repair or replace the product at the manufacturer's expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted. The Limited Lifetime Warranty does not apply to normal wear and tear or abusive treatment of the product.
Miller is a brand of Protective Industrial Products, Inc. (PIP). Should a product issue surface, contact Fall Protection Distributors, LLC and we will coordinate the warranty claim with the manufacturer.
